Products

XGECU TSOP56 ADP_F56_EX-A/B/C V2.0 Adapter for T48 Programmer: for Flash EPROM NAND EMMC ADP_F56_EX-B ADP_F56_EX-C from NSE Imports #1.

XGECU TSOP56 ADP_F56_EX-A/B/C V2.0 Adapter for T48 Programmer: for Flash EPROM NAND EMMC ADP_F56_EX-B ADP_F56_EX-C from NSE Imports #2.

Ships from: China XGECU TSOP56 ADP_F56_EX-A/B/C V2.0 Adapter for T48 Programmer: for Flash EPROM NAND EMMC ADP_F56_EX-B ADP_F56_EX-C from £21.95 £23.95

These updated TSOP56 adapter modules for the XGecu T48 programmer offer enhanced functionality. The updated v2.0 design does away with the baseplate and socket design of the original, instead you can buy just the adapter you need, or purchase all three. The adapters enable reading and programming of various TSOP56 packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIF socket is ideal for recovery and/or programming operations. This adapter replaces the older SN001 series of boards which do not work on the T48 as XGECU has removed support for them. Please note: These adapters only can work on the XGecu T48 programmer, there are not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with TSOP56 0.5mm NOR, NAND, EMMC, EPROM IC packages For T48 Programmer only Ideal for 29XXXTSOP56, 28F32/64/128/256, 28F128/256/512/00A-P, S29GL128NxxTAx02 and similar IC's Replaces TL866II SN001 and TSOP socket adapters ZIF socket rated for 10,000 actuations Plate ADP_F56_EX-A supports: 29xxx series chips Plate ADP_F56_EX-B supports: 28F32/64/128/256 series chips Plate ADP_F56_EX-C supports: 28F128/256/512/00A-P series chips Item includes: 1x TSOP56 Header PLate, 1x ISP cable, 1x ADP_F56_EX-A, 1x ADP_F56_EX-B, 1x ADP_F56_EX-C

Add to cart

XH-M229 ATX Power Terminal Board: Convert an ATX PSU into a Bench Supply from NSE Imports #1.

XH-M229 ATX Power Terminal Board: Convert an ATX PSU into a Bench Supply from NSE Imports #2.

Ships from: China XH-M229 ATX Power Terminal Board: Convert an ATX PSU into a Bench Supply £11.95

The Geekcreit XH-M229 ATX Power Terminal Board is a handy device that can be used for a variety of tasks, including: Testing ATX PSU voltages Converting an ATX PSU into a bench supply Simply powering on a Bit-mining rig The board provides 4 fused outputs: +12v, -12v, +5v, and +3.3v. It also features a power on/off switch and power LED. The terminal outputs allow for wire wrap or crimped hole/spade connectors. This makes the board great for projects needing higher wattage supply at different voltages. Features: Provides 4 fused outputs: +12v, -12v, +5v, and +3.3v Power on/off switch and Power LED The terminal outputs allow for wire wrap or crimped hole/spade connectors Great for projects needing higher wattage supply at different voltages Specifications: Model: XH-M229 Compatible PSU: ATX ATX PIN Type: 24 pin Switch: Yes Number of sets of output: Four sets of outputs, +12, -12, +5, +3.3 Size: 12.8x4.8cm/5.04x1.89in Package included: 1 x XH-M229 24 Pin Desktop Chassis Power Supply ATX Adapter Transfer Board Module

Xiaomi ZAJIA and XIAODA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet from NSE Imports #1.

Xiaomi ZAJIA and XIAODA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet from NSE Imports #2.

Ships from: China Xiaomi ZAJIA and XIAODA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet from £22.95

These Xiaomi Automatic Water Saving Devices are a high tech solution to reducing water usage. Once fitted in place of your regular faucet nozzle they block the flow of water until you activate one of the two sensors. When activated they water will either flow until the sensor no longer detects an object, or when the side sensor is activated, for example when placing a large pan or waving your hand over it, the faucet will flow for three mins or until you trigger the side sensor again. Suitable for use in both Kitchen and Bathroom sinks.The unit run from a USB charged battery (upto 6 months per charge) and is IPX6 Waterproof Rated. When the battery runs low simply pop off the mount and charge from any regular USB power source. These are ideal for situations where you would to avoid touching the faucet to help prevent the spread of germs or dirt. The two versions are feature identical, the only difference in the packaging and included manual. Please note: The ZAJIA and XIAODA are functionally identical, EXCEPT the XIAODA only comes with a single adapter, see images or the Specifications list for Xiaoda Box Contents. Additionally Xiaomi updated the design of the unit recently, newer units will be look a little different to those shown in the main photos. Two Sensor Modes: Bottom Sensor: For Short-term Water NeedsWhen an object enters the bottom sensing area (within a limited distance of 10 cm), the water begins to flow. When the object leaves the sensor area, water stops flowing out. This is ideal for washing hands, filling glasses etc... Side Sensor: Water StorageWhen an object triggers the side sensor area (within about 5cm), water will begin to flow out. If you trigger the sensor again it will stop flowing or will automatically cut off after three minutes. Features: Water saving device, stops the flow automatically Double sensors, two water modes, Instant on/off and upto 3 minutes continuous flow. 0.25 second fast reaction. Touch free IR sensor, reducing touch contamination. First-class water efficiency, energy saving and environmental protection. Simple design style, adapt to various home styles. 6 sets of adapters, fits most tap designs. Convenient to disassemble and assemble Super long battery life Water overflow protection IPX6 Waterproof Specifications ⠀ Brand ZAJIA (Xiaomi Ecological Chain) Weight 105g Size 60x34x49mm Standby Energy Consumption ≤0.2mW Working Water Pressure 0.05-0.8MPa Sensing Area Side Sensor 0-5cm/Bottom Sensor 0-10cm Water Efficiency First Level Protection Grade IPX6 Adapters Supplied M20, M22, M24, G/12, M20 (f), M22 (f) Charging Method USB Package Includes (ZAJIA): 1 x Infrared Induction Water Saving Device For Faucet1 x Installation Wrench3 x Seal Rings6 x Adapters1 x Instructions Package Includes (XIAODA): 1 x Infrared Induction Water Saving Device For Faucet1 x Hexagon Wrench3 x Seal Rings1 x M20 Internal Thread / M24 External Thread Adapter1x M22 Fixed Joint1 x Instructions Additional Images ⠀ Return to top Usage Notes ⠀ General Usage: Instant mode Washing the face and washing the new fun bottom sensor to meet the short-term water demand. When the sensor enters the bottom sensing area (with a limited distance of 10cm), the water starts. When the sensor is away, the water is stopped. If the sensor stays in the bottom sensing area, the water will stop automatically after more than 20 seconds of water discharge, which is needed for daily cleaning. Water storage mode The side and side sensors of the pots and pans are satisfied with the water storage use requirements. When the sensor enters the side sensing area (with a limited distance of 5 cm), the water starts to flow. The water discharge time lasts for 3 minutes, and the water remains even if the sensory object leaves. If the sensor enters the side sensing area again during the water discharge process, the water can be stopped at all times, which is a good choice for water storage.

Add to cart

YK-BPW1 Digital LCD Wrist Blood Pressure & Pulse Rate Monitor Arrhythmia from NSE Imports #1.

YK-BPW1 Digital LCD Wrist Blood Pressure & Pulse Rate Monitor Arrhythmia from NSE Imports #2.

Ships from: China YK-BPW1 Digital LCD Wrist Blood Pressure & Pulse Rate Monitor Arrhythmia £15.95

Quickly and easily measure your Blood Pressure with this handy portable tester, To ensure measurements are clear and easy to read the BOXYM BPW1 feature with a large digital display with clear Systolic (SYS), Diastolic (DIA) and Pulse figures. Readings are presented in either kilopascals (kPa) or millimetre of mercury (mmHg). The integrated design takes up less space and has no hoses to worry about. To help keep track of reading there are 2 User profiles, both can store 99 sets of data memory and display an average over the last three readings.Please note: Users with serious arrhythmia should consult a medical professional before use. Features: For wrist circumference range: 13.5cm-19.5cm Suitable for ages 12+ Air Pressure: 50kPa~105kPa Test Method: Oscillation Method with Intelligent Pressure. Small, portable size, only 61.8*33.1*26.3mm. Switchable kilopascals (kPa) or millimetre of mercury (mmHg) readings Auto power off. Stores up to 99 sets of readings, can display average of last 3. Retains data during battery change over Air pressure over 295 mmhg(20 m s) triggers automatic fast exhaust. Power: 2 * AAA alkaline batteries. (Not supplied) Specifications: Model BPW1 Wrist Blood Pressure Monitor Item Type: Blood Pressure Size: 15cm*10cm*8cm Material: ABS Commodity Quality Certification: 3C,CE Model Number: BPW1 Application: Wrist Color: Blue Pink Green Purple Grey Sphygmomanometer: Digital Sphygmomanometer Warranty time:1 year Supply Type: Manufacturer Level: Medical Pressurization: Automatic Pressurization Mode Class: Health Care Blood Pressure Measurement: Sit in a chair as shown below, don’t lean forward or bend your body. Before measurement, take a deep breath three or four times, recover to the normal breath, relax your shoulders and arms. Make sure your body is relaxed During measurement, the middle of the wrist cuff should be the same height with the heart. The body and your wrist cannot move. We recommend that you put a soft cushion under the elbow, as shown in the above picture. Attention During measurement, make sure your fingers are in a natural position, otherwise the measured value will be high although the position of the wrist cuff is right. Do not hold the wrist cuff by the other hand, otherwise it will cause an error in measurement. Don’t press your arm during measurement, otherwise the value will be increased. Before measurement, keep yourself in a relaxed, comfortable mood.During measurement, don’t move the muscle on this arm,if you need, you can put one soft cushion under your arm. In every measurement, you should use the same posture and wrist position. If the position of the wrist cuff is lower or higher than your heart, the reading will be higher or lower. Make sure the wrist cuff is worn correctly and at the same height of your heart. During measurement, don’t talk, don't walk, don’t move your shoulder and arm, don’t bend your fingers.

Add to cart

ERYONE PLA Filament: Various Colors For FDM 3D Printers from NSE Imports #24.

ERYONE PLA Filament: Various Colors For FDM 3D Printers from NSE Imports #2.

Ships from: The US [US] ERYONE PLA Filament 1kg 1.75mm Vacuum Packaging Various Colors For FDM 3D Printers £23.95

ERYONE PLA Filament is a top-notch 3D printing material, crafted from high-quality virgin plastic and vibrant colours. Our vacuum packaging ensures optimal freshness, while our tangle-free winding and tight tolerance control guarantee smooth, reliable prints. Committed to sustainability, ERYONE filament now comes on fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

29 30 31

Friendly Service

Excellent service with a friendly touch.

Free Tracked Delivery to most destinations

Free delivery to UK, EU, US, AU and more.

Low Prices

If we are not the lowest please get in touch.

Latest and Greatest Tech

We are always searching for the latest products

NSE IMPORTS
OFFICE 7
35-37 LUDGATE HILL
LONDON
EC4M 7JN

shop@nseimports.co.uk

07967323318

Links Search Our Site About NSE Imports Contact Us Privacy Policy Refund Policy Shipping Policy Terms of Service View our Blog Sitemap Klarna Information

Find anything you need

Friendly Service

Free Tracked Delivery to most destinations

Low Prices

Latest and Greatest Tech