Sold out
BL-Touch Auto Bed Leveling Sensor: Improve your 3D prints with automatic bed leveling - NSE Imports BL-Touch Auto Bed Leveling Sensor: Improve your 3D prints with automatic bed leveling - NSE Imports
ANTCLABS
Ships from: The UKShips from UK to UK only
BL-Touch Auto Bed Leveling Sensor: Improve your 3D... £19.95
The BL-Touch Auto Bed Leveling Sensor is a popular upgrade for 3D printers. It uses a sensor to measure the distance between the print head and the heated bed, and then automatically adjusts the Z-axis height during printing. This ensures that the first layer is always laid down correctly, even if the bed is not perfectly level. The BL-Touch is easy to install and use. Simply mount the sensor to your printer, connect the wires, and enable the auto leveling feature in your printer's firmware. Features: Automatic bed leveling High precision Easy to install and use Improves print quality Reduces failure rates Specifications: Voltage: 5V Current: 15mA Maximum(Peak) Current: 300mA Case Material: Polycarbonate(PC) Case Colour: Semitransparent White Cable Length: 150mm PCB & Soldering: RoHS, Lead Free (Pb Free) Package Included: 1 x ANTCLABS BLTouch Auto Bed Levelling Sensor 2 X Dupont Housing Shell 3Pin 2 X Dupont Housing Shell 2Pin 2 X Dupont Housing Shell 1Pin 10 X Dupont Terminal 1 X Jumper Cap With Screw & Nut & Washer Manual and More Info RAMPS1.3/1.4, MKS-Gen V1.3, MKS-Base V1.4, etc. installation: Click Here MKS-Base V1.2, mini-Rambo, etc. installation: Click Here 32bit board installation: Click Here Setup Manual: Click Here Marlin Manual Click Here
Geeetech 3D Touch Sensor V3.2 Pro Auto Bed Levelling Sensor High precision FDM 3D Printer Part Accessories - NSE Imports Geeetech 3D Touch Sensor V3.2 Pro Auto Bed Levelling Sensor High precision FDM 3D Printer Part Accessories - NSE Imports
Geeetech
Ships from: ChinaShips from China to most countries
Geeetech 3D Touch Sensor V3.2 Pro Auto Bed... £19.95
Building on their previous model Geeetech have gone back to the drawing board and released this new and updated auto bed level sensor for 3D Printers. The 3D touch v3.2 Pro is a new generation of FDM 3D printer hot bed automatic leveling accessory. It is compatible with glass, wood, metal and other materials of hot bed, bringing you a simpler and faster hot bed leveling experience, improving the success rate of 3D printing. The probe of 3D touch V3.2 Pro has an accuracy deviation within 0.005mm, offering you a higher precision and stability than older metal probes.  The 3D Touch v3.2 Pro adopts a high sensitivity Hall sensor, compared with capacitive sensor or inductive sensor, it is not affected by the hot bed material, allowing you to use it on glass,metal, plastic and other common material hot beds without interference concerns.  Geeetech test each 3DTouch v3.2 Pro for accuracy before leaving the factory, only the products that meet their accuracy standards are allowed to be sold.  Compatible with most Geeetech FDM style printers that accept BL-Touch style sensors, other brands such as Creality, Artillery, Sunlu, Prusia, Easythreed with BL-Touch support should be able to use this sensor but may need firmware updates and a printed mount. Wiring: 3-pin: Brown (-, GND), Red (+5V), Orange (control signal) 2-pin: Black (-, GND), White (Z min) Features: New structural design, higher precision Suitable for various materials hotbeds New industrial design New surface treatment High precision, accuracy deviation is ±0.005mm Automatic detection after power on Abnormal alarm More stable and reliable Intelligent measurement Included Parts: 3D-touch: 1, M3 screws: 4, M3 nuts: 2, Metal holder: 1, 18cm cable: 1, 100cm cable: 1 Power supply: DC 5V, Current:15mA~300mA
Geeetech 3D Touch Sensor V3.2 Pro Auto Bed Levelling Sensor High precision FDM 3D Printer Part Accessories UK Stock - NSE Imports Geeetech 3D Touch Sensor V3.2 Pro Auto Bed Levelling Sensor High precision FDM 3D Printer Part Accessories UK Stock - NSE Imports
Geeetech
Ships from: The UKShips from UK to UK only
Geeetech 3D Touch Sensor V3.2 Pro Auto Bed... £19.95 £25.95
Building on their previous model Geeetech have gone back to the drawing board and released this new and updated auto bed level sensor for 3D Printers. The 3D touch v3.2 Pro is a new generation of FDM 3D printer hot bed automatic leveling accessory. It is compatible with glass, wood, metal and other materials of hot bed, bringing you a simpler and faster hot bed leveling experience, improving the success rate of 3D printing. The probe of 3D touch V3.2 Pro has an accuracy deviation within 0.005mm, offering you a higher precision and stability than older metal probes.  The 3D Touch v3.2 Pro adopts a high sensitivity Hall sensor, compared with capacitive sensor or inductive sensor, it is not affected by the hot bed material, allowing you to use it on glass,metal, plastic and other common material hot beds without interference concerns.  Geeetech test each 3DTouch v3.2 Pro for accuracy before leaving the factory, only the products that meet their accuracy standards are allowed to be sold.  Compatible with most Geeetech FDM style printers that accept BL-Touch style sensors, other brands such as Creality, Artillery, Sunlu, Prusia, Easythreed with BL-Touch support should be able to use this sensor but may need firmware updates and a printed mount. Wiring: 3-pin: Brown (-, GND), Red (+5V), Orange (control signal) 2-pin: Black (-, GND), White (Z min) Features: New structural design, higher precision Suitable for various materials hotbeds New industrial design New surface treatment High precision, accuracy deviation is ±0.005mm Automatic detection after power on Abnormal alarm More stable and reliable Intelligent measurement Included Parts: 3D-touch: 1, M3 screws: 4, M3 nuts: 2, Metal holder: 1, 18cm cable: 1, 100cm cable: 1 Power supply: DC 5V, Current:15mA~300mA
Two Trees Auto Touch Module: Improve your 3D prints with automatic bed leveling Two Trees Auto Touch Module: Improve your 3D prints with automatic bed leveling
TWO TREES
Ships from: ChinaShips from China to most countries
Two Trees Auto Touch Module: Improve your 3D... from £6.95
The Two Trees Auto Touch Module is a BL-Touch compatible upgrade that can be installed on many 3D printers to improve bed leveling accuracy. This can lead to improved print quality and reduced failure rates. The Auto Touch Module uses a hall effect sensor to measure the distance between the print head and the heated bed. This information is used to automatically adjust the Z-axis height during printing, ensuring that the first layer is always laid down correctly. The Auto Touch Module is easy to install and use. Simply mount the sensor to your printer, connect the wires, and enable the auto leveling feature in your printer's firmware. Features: Automatic bed leveling Hall effect sensor Easy to install and use Improves print quality Reduces failure rates Specifications: Voltage: 5V Current: 15mA Max Current(Peak): 300mA Shell Material: PC Cable Length: short 200mm long 1000mm Standard Package Included:1* Leveling Sensor1* 200mm Cable1* 1000mm Cable2* M3 nuts and screws2* XH2.54mm Terminals1* Coiling Terminal Wiring: 3 Pin:Green: GND Red: +5V Orange: Signal Cable 2 Pin:Black: GND White: Z-min Technical Information: Click to view Technical Information ×

Free Tracked Shipping*

*Some countries may have a small delivery charge due to disproportionately high shipping.

Fully secured payments

All our payments are handled by secure methods, we'll never see or ask for your payment details.

Friendly service

We pride ourselves on great service, no matter the order value, we want you to be satisfied with it.