PLA 3D Printer Filament (22)
PLA (Polylactic acid, or polylactide) 3D Printer Filament is the most common filament used, it's easy to work with and does not require a heated bed for most prints.
Sold out


ERYONE
ERYONE Rainbow PLA Filament Multicolor Perfect Spooled 1.75mm...
$29.43
Ships from: The UKShips from UK to UK only
ERYONE Rainbow PLA Filament brings some multicolour action to your prints, with color changes every 15m of filament, each print will be unique. With 4 colour choices, ranging from the very bold Metal Silk, to the the more subtle tones of the Steampunk Rainbow, it produces models with a very high quality, colour packed finish.
Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled.
Features:
Make some bold prints with Classic Rainbow and Metal Silk
Make subtle colour changes with Rainbow Lagoon and Steampunk Rainbow
Stable Printing: Neatly rolled, high quality.
Little Clogging: The diameter is strictly controlled at 1.75±0.03mm.
Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Finish: Awesome Rainbows
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 210-220°C
Recommended Print Speed: 30-60mm/s
Heated Bed Temp: 55-70°C
Gross weight: 1.35kg (approx)
Net Weight: 1kg (approx)
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


SUNLU
SUNLU PLA / PLA Silk / PLA PLUS...
from $24.30
Ships from: The UKShips from UK to UK only
SUNLU PETG and PLA Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Please make sure you double check colour and material when placing your order.
Important Information About The Packaging
⠀
SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PETG Features
Good toughness, high hardness Impact strength is 30 times more than PLA and the elongation at break of more than 50 time PLA.
Compatible printers must have heating device, ideal for printing heat resistant and transparent models, such as: lampshades.
PETG Specifications:
Diameter: 1.75mm
Tolerance: +/-0.02mm
Print speed: 50-100mm/s
Recommend print Temperature: 230-250°C
Platform temperature: 80-120°C
Net weight: 1kg with spool
Gross weight: 1.3kg
Length:1.75mm(1kg)=395m
PLA Features:
PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3d Printer, suitable for printing artworks and crafts. 100% no bubble 3d Printer filament.
PLA Specifications:
Diameter: 1.75mm
Tolerance: +/-0.02mm
Print speed: 50-100mm/s
Recommend Print Temperature: 190-220°C
Platform Temperature: 80-120°C
Net weight: 1kg with spool
Gross weight: 1.35kg
PLA Filament Length: 1.75mm(1kg)=330m
PLA+ Features:
PLA+ is a more durable form of traditional PLA, it can give strength similar to PETG or ABS but with the ease of PLA printing techniques. Ideal for applications where you need a more durable print but not necessarily the heat or acid resistant properties of PETG or ABS.
PLA+ Specifications:
Model: PLA PLUS (PLA+)
Diameter Format: 1.75mm
Print Temp.: 210-235°C
Tolerance: ±0.02mm
Print Speed: 50-100mm/s
Platform Temp: Depends on the platform: No need or 60-80℃
Net Weight: 1kg
Gross Weight: 1.3kg
Packing Size: 209*209*73mm
Length: 330m
Tensile Strength: 11-15kgf
Melt Flow Rate: 9-11g/10 min(190℃,2.16kg)
Certificate: RoHS, Reach


ERYONE
ERYONE PLA Filament: Various Colors For FDM 3D...
$26.86
Ships from: The UKShips from UK to UK only
ERYONE PLA Filament is a high quality PLA Filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 210-220°C
Peak Melting Temp: 155±5°C>
Heated Bed Temp: 55-70°C
Recommended Print Speed 30-100mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Specific Gravity [g/cm3]: 1.24
MFR [g/10min]: 6
Tensile Strength [MPa]: 61
Elongation at Yield [%]: 3.2
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


ERYONE
ERYONE Matte PLA Filament: 1kg 1.75mm 3D Printer...
$25.58
Ships from: The UKShips from UK to UK only
ERYONE Matte PLA Filament brings a high quality finish without the shine of regular PLA, Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 200-215°C
Heated Bed Temp: 60-70°C
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Tensile Strength [MPa]: 82-85
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


SUNLU
SUNLU 10x PLA/PLA+ Filament 1.75mm 3D Printer Dimensional...
from $189.72
Ships from: The UKShips from UK to UK only
SUNLU PLA and PLA+ Filament are high quality bubble free filaments, suitable for use in most FDM style 3D Printers such as Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed and more. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers.
PLA Features:
SUNLU PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3D Printer, suitable for printing artworks, crafts, models, light duty tools and prototypes. 100% No bubble fresh 3D Printer filament.
PLA+ Features:
PLA+ is a more durable form of traditional PLA, it can give strength similar to PETG or ABS but with the ease of PLA printing techniques. Ideal for applications where you need a more durable print but not necessarily the heat or acid resistant properties of PETG or ABS.
Important Information About The Packaging
⠀
SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PLA Specifications:
PLA Filament Diameter: 1.75mm/3.0mm
PLA Diameter Tolerance: +/-0.02mm
Print speed: 50-100mm/s
Recommend print Temperature: 200-230°C
Platform temperature: 80-120°C
Net weight: 1kg with spool
Gross weight: 1.35kg
PLA Filament Length:1.75mm(1kg)=330m
PLA+ Specifications:
Model: PLA PLUS (PLA+)
Diameter Format: 1.75mm
Print Temp.: 210-235°C
Tolerance: ±0.02mm
Print Speed: 50-100mm/s
Platform Temp: Depends on the platform: No need or 60-80℃
Net Weight: 1kg
Gross Weight: 1.3kg
Packing Size: 209*209*73mm
Length: 330m
Tensile Strength: 11-15kgf
Melt Flow Rate: 9-11g/10 min(190℃,2.16kg)
Certificate: RoHS, Reach


ERYONE
ERYONE PLA Plus Filament: Stronger than regular PLA...
$26.86
Ships from: The UKShips from UK to UK only
ERYONE PLA PLUs (PLA+) Filament is a high quality PLA Filament, based on their already outstanding PLA filament, ERYONE PLA PLUS improves the strength of the print over regular PLA to similar levels as PETG, but keeps the ease of printing that regular PLA brings. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 210-220°C
Peak Melting Temp: 155±5°C>
Heated Bed Temp: 55-70°C
Recommended Print Speed 30-100mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Specific Gravity [g/cm3]: 1.24
MFR [g/10min]: 6
Tensile Strength [MPa]: 61
Elongation at Yield [%]: 3.2
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


GEEETECH
Geeetech PLA 3D Printer Filament: 1kg 1.75mm Many...
from $19.17
Ships from: The UKShips from UK to UK only
Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA.
Features:
High quality fresh filament, not recycled.
Vacuum Packed for freshness
Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc.....
Specifications:
Material
PLA
ABS
PETG
Printing Temp
190-220°C
220-240°C
230-250°C
Density
1.25±0.05g/cm³
1.04±0.2g/cm³
1.23g/cm³
Length
330±10m
400±10m
325±10m
Strength
≥60Mpa
43Mpa
53Mpa
Diameter
1.75mm ±0.2mm
Bubble
100% Bubble Free
Net Weight
1kg
Gross Weight
1.3kg (approx)
Environment friendly
Yes
No
Yes
Heated Bed Required
Not necessary
80-120°C
75-90°C
Properties
Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength
High temperature resistanceGood impact and wear resistanceGood toughness
Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken
Additional Images
⠀
Return to top


ERYONE
ERYONE Dual Colour 1kg 1.75mm PLA 3D Printer...
from $39.69
Ships from: The UKShips from UK to UK only
ERYONE Dual Colour PLA Filament is ideal for creating eye catching prints. With a range of colour choices, these print similar to Rainbow filaments but with just two mixed colours. Available in Regular, Matte and Silk options.
The 4x mixed spool options contain the following:
4x 250g Matte Dual: Yellow/Purple, Blue/Purple, Green/Purple, Blue/Yellow
4x 250g Silk Dual (A): Blue/Green, Red/Green, Red/Blue, Purple/Gold
4x 250g Silk Dual (B): Gold/Bronze, Gold/Silver, Red/Gold, Yellow/Green
Made from high quality virgin plastic, with strong colours and supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. This is a great filament for making props and cosplay items. No need to try and coat an item with glitter after printing, the glitter finish runs through your print as well, meaning the odd scuff won't leave bald patches.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa,Makerbot,etc. ERYONE filament had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 210-220°C
Peak Melting Temp: 155±5°C>
Heated Bed Temp: 55-70°C
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Specific Gravity [g/cm3]: 1.24
MFR [g/10min]: 6
Tensile Strength [MPa]: 61
Elongation at Yield [%]: 3.2
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


Flashforge
Flashforge PLA 3D Printer Filament: UK Stock 1kg...
$28.15
Ships from: The UKShips from UK to UK only
Flashforge PLA Filament is a high quality filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Flashforge filament, firmly follows the ISO 9001 quality standards and lean production requirements to ensure each roll of 3D filament produces great results.
Features:
Environmentally friendly: Flashforge PLA filament 1.75mm is drilled from corn grain, has no odor omitted in use, and passes the EU RoHS certification. Flashforge filament PLA 1.75 is suitable for teenagers and children to use at home or school, harmless to the human body.
High precision: The wire diameter of Flashforge PLA filaments is strictly controlled, with deviation less than 0.05mm. Effectively improving 3D printing effects.
Strong compatibility: Flashforge best PLA materials are applicable to mainstream FDM 3D printers on the market.
Good fluidity after melting: Greatly reducing problems of nozzle plug
High strength: Flashforge PLA filaments ensure high hardness of the printed models. Wear resistant and durable in use.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.05mm
Print Temperature: 190-220°C
Recommended Print Speed 60-90mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Tensile Strength: ≥60 MPa
Elongation at Break: ≥3 %
Flexural Strength: ≥60 MPa
Flexural Modulus: ≥2500 MPa
IZOD Impact Strength: ≥16 J/m
Layer Thickness: 0.1-0.2 mm
Heat Deflection Temperature: ≥55 °C
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out


ERYONE
ERYONE Metallic PLA 3D Printer Filament: Magnetic filament...
$33.28
Ships from: The UKShips from UK to UK only
ERYONE Metallic PLA Filament is infused with metal particles, not only does this provide a satin metal sheen to your prints, but also allows you prints to be attracted by magnets. Available in a range of bold colors, made from high quality virgin plastic and supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 200-215°C
Heated Bed Temp: 60-70°C
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Tensile Strength [MPa]: 82-85
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out


SUNLU
SUNLU PLA Filament 1.75mm 1kg 3D Printer Filament...
$220.55
$235.94
Ships from: The UKShips from UK to UK only
SUNLU PLA and PLA+ Filament are high quality bubble free filaments, suitable for use in most FDM style 3D Printers such as Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed and more. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers.
PLA Features:
SUNLU PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3D Printer, suitable for printing artworks, crafts, models, light duty tools and prototypes. 100% No bubble fresh 3D Printer filament.
Important Information About The Packaging
⠀
SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PLA Specifications:
PLA Filament Diameter: 1.75mm/3.0mm
PLA Diameter Tolerance: +/-0.02mm
Print speed: 50-100mm/s
Recommend print Temperature: 200-230°C
Platform temperature: 80-120°C
Net weight: 1kg with spool
Gross weight: 1.35kg
PLA Filament Length:1.75mm(1kg)=330m
![[US] ERYONE PLA Filament 1kg 1.75mm Vacuum Packaging Various Colors For FDM 3D Printers - NSE Imports](http://nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_375x.jpg?v=1664880044 375w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_410x.jpg?v=1664880044 410w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_520x.jpg?v=1664880044 520w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_576x.jpg?v=1664880044 576w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_768x.jpg?v=1664880044 768w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_992x.jpg?v=1664880044 992w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_1024x.jpg?v=1664880044 1024w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-1_1280x.jpg?v=1664880044 1280w)
![[US] ERYONE PLA Filament 1kg 1.75mm Vacuum Packaging Various Colors For FDM 3D Printers - NSE Imports](http://nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_375x.jpg?v=1664880047 375w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_410x.jpg?v=1664880047 410w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_520x.jpg?v=1664880047 520w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_576x.jpg?v=1664880047 576w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_768x.jpg?v=1664880047 768w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_992x.jpg?v=1664880047 992w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_1024x.jpg?v=1664880047 1024w,//nseimports.co.uk/cdn/shop/products/us-eryone-pla-filament-1kg-1-75mm-vacuum-packaging-various-colors-for-fdm-3d-printers-nse-imports-2_1280x.jpg?v=1664880047 1280w)
ERYONE
[US] ERYONE PLA Filament 1kg 1.75mm Vacuum Packaging...
$34.56
Ships from: The USShips from US to US only
ERYONE PLA Filament is a high quality PLA Filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 210-220°C
Peak Melting Temp: 155±5°C>
Heated Bed Temp: 55-70°C
Recommended Print Speed 30-100mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Specific Gravity [g/cm3]: 1.24
MFR [g/10min]: 6
Tensile Strength [MPa]: 61
Elongation at Yield [%]: 3.2
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


GEEETECH
Geeetech 1kg 1.75mm Glow in the dark Green...
from $21.74
Ships from: The UKShips from UK to UK only
Geeetech Glow In The Dark 3D Printer Filament is ideal for making Halloween Props, Nightlight and much more. Once printed, let the part sit in the light for a few hours and when placed in the dark it will glow. The glow can be charged from Lightbulb, Sunlight or UV light, best and brightest results come from UV, then Sunlight, then Bulbs.
Suitable for for printing with most FDM style 3D Printers with a heated bed.
Specifications:
Filament diameter : 1.75mm ±0.3mm
Print Temperature Range 190 - 230°C
Recommended Print Temperature: 220°C
Printer Bed Temperature: 50 - 70°C
Material: PLA
Colour: Luminous Green, Orange, White, Blue, Yellow, Purple, Rainbow, Rose Red
Net Weight: 1kg
Gross Weight:1.4kg
Sold out


ERYONE
ERYONE Mini Rainbow PLA 3D Printer Filament: More...
$43.54
Ships from: The UKShips from UK to UK only
ERYONE Mini Rainbow PLA Filament brings some multicolour action to your prints, with color changes every 9-11m of filament, you get more frequent changes of colour, each print will be unique, it produces models with a very high quality, colour packed finishes.
Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled.
Features:
Color circulation: Red-Orange-Yellow-Green-Teal-Blue-Purple-Red
Most rolls should start with Red but some may not due to spooling variances
Shorter colour transactions, about 9-11m best seen on larger prints
Stable Printing: Neatly rolled, high quality.
Little Clogging: The diameter is strictly controlled at 1.75±0.03mm.
Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Finish: Awesome Rainbows
Tolerance: ± 0.05mm
Print Temperature: 190-215°C
Recommended Print Speed: 30-60mm/s
Heated Bed Temp: 55-70°C
Gross weight: 1.35kg (approx)
Net Weight: 1kg (approx)
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


SUNLU
SUNLU PLA Twin Pack: 3D Printer Filament 1.75m...
from $43.54
Ships from: The UKShips from UK to UK only
SUNLU PLA Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PLA is a stronger filament and more rigid than ABS, and the printed objects will have a more glossy look and feel compared to ABS. As a material, PLA has much less warping versus ABS. Unlike ABS, PLA can be sanded and machined. Additionally, a heated bed is not required to print it. PLA usually enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds. It is also compatible with different brands of 3D printers (such as Makerbot, Mendel, RepRap, UP, Prusa, Huxley, BFB3000, uPrint, Cubify, printrbot, Sumpod) These great twin packs are great value against ordering single spools.
Features:
Eco-friendly/Biodegradable
High strength
Low shrinkage. Perfectly guarantee the model size
Rapid condensation. easy to print
Odorless,non-toxic. Harmless to human body
Important Information About The Packaging:
SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
Additional Images:
Click to view
Additional images
×
Specifications:
PLA Filament Diameter: 1.75mm/3.0mm
PLA Diameter Tolerance: +/-0.02mm
Print speed: 50-100mm/s
PLA Filament : 26 colors(Black,white,grey,red yellow,green,purple,blue,brown,etc..)
Recommend print Temperature: 200-230°C
Platform temperature: 80-120°C
Net weight: 1kg with spool
Gross weight: 1.35kg
PLA Filament Length:1.75mm(1kg)=330m
Free Tracked Shipping*
*Some countries may have a small delivery charge due to disproportionately high shipping.Fully secured payments
All our payments are handled by secure methods, we'll never see or ask for your payment details.Friendly service
We pride ourselves on great service, no matter the order value, we want you to be satisfied with it.Contact Us
Downloads & Resources
3D Printers
Digital Microscopes
Digital Oscilloscopes
Game Controllers
IC Programmers
Respirator Mask Advice
We Happily Accept