TPU 3D Printing Filament 1.75mm Flexible No Bubble Non-toxic 3D Printer Plastic Material TPU Filament 0.5KG/0.25KG - NSE Imports TPU 3D Printing Filament 1.75mm Flexible No Bubble Non-toxic 3D Printer Plastic Material TPU Filament 0.5KG/0.25KG - NSE Imports
EasyThreed
Ships from: ChinaShips from China to most countries
TPU 3D Printing Filament 1.75mm Flexible No Bubble... from £12.95
Print flexible parts and models with this high quality TPU filament, ideal for wheels, belts, phone cases (maybe in conjunction with a harder shell in another material), cosplay costumes, bushes and more. Features: Thermoplastic polyurethane (TPU) is a high strength flexible filament, including elasticity, transparency, and resistance to oil, grease and abrasion. It's flexible, can be bent to 360 degree. Technically, they are thermoplastic elastomers consisting of linear segmented block copolymers composed of hard and soft segments. TPU can be easier to print with, with great layer-to-layer adhesion. Flexible material has many applications including automotive instrument panels, caster wheels, power tools, sporting goods, medical devices, drive belts, footwear, inflatable rafts, and a variety of extruded film, sheet and profile applications. TPU is also a popular material found in outer cases of mobile electronic devices, such as mobile phones. It is also used to make keyboard protectors for laptops. Specially formulated TPU 3D Printers Filament, Clog-Free, Bubble-Free, stable in performance/ Dimensional Accuracy and Consistency, +/- 0.05 mm tolerance and 1.75mm diameter without any exaggeration. It consistently provides optimum flow through the extruder nozzle. Most 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments. Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Environmental Friendly . it complies with the Restriction of Hazardous Substance directive and are free from potentially hazardous substances. Specifications Diameter: 1.75mm Tolerance: +/- 0.05mm Hardness: 95A Density: 1.25±0.05g/cm3 Extruder Temperature: 190-230°C Printing Speed: 30-60mm/s Bed Temperature: 40°C Layer height: 0.1-0.4mm Printing tips Slow down the speed, 10-20mm/s Not suitable for printing models that are too high, because the higher the model, the upper portion of the model can move or sway Because the consumables themselves are flexible, the printer's filament feed and extruder design must support it. Printing temperature: 190-225°C The distance between the wire feeding gear and the nozzle should be short
Sold out
ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models - NSE Imports ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models - NSE Imports
ERYONE
Ships from: The UKShips from UK to UK only
ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer... £16.95
ERYONE TPU Filament is a high quality TPU Filament, excellent for making bendy models. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 15-30mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 0.5kg / 500g (inc spool) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out
ERYONE TPU Rainbow Flexible Filament 0.5kg 500g 1.75mm ±0.05mm for FDM 3D Printer Make Multi Colour Bendy Models - NSE Imports ERYONE TPU Rainbow Flexible Filament 0.5kg 500g 1.75mm ±0.05mm for FDM 3D Printer Make Multi Colour Bendy Models - NSE Imports
ERYONE
Ships from: The UKShips from UK to UK only
ERYONE TPU Rainbow Flexible Filament 0.5kg 500g 1.75mm... £23.95
ERYONE Rainbow TPU Filament is excellent for making bright, multi coloured bendy models. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 15-30mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 0.5kg / 500g (inc spool) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
SUNLU TPU Flexible 3D Printer Filament: Make Bendy Models And Prints, 1.75mm 0.5kg/1.1lb Spool SUNLU TPU Flexible 3D Printer Filament: Make Bendy Models And Prints, 1.75mm 0.5kg/1.1lb Spool
SUNLU
Ships from: The UKShips from UK to UK only
SUNLU TPU Flexible 3D Printer Filament: Make Bendy... from £18.95
SUNLU TPU Filament is ideal for making models and prints that require a bit of flex to them, easy to print and retains its elastic properties better at lower temperatures. TPU material also has a higher abrasion resistance and a higher resistance to oils and greases. TPU filament, unlike other stiffer thermoplastics, has qualities that include flexibility and conformity. It also has excellent interlayer adhesion and no curling or delamination during the 3D printing process. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. TPU Features: TPU flexible filament is non-toxic, easy to feed, easy to form, high toughness and resilience material. Ideal for printing children’s toys, shoes, etc. Costume and Cosplay Parts 100% no bubble 3d printer material. When printing thinner and less filled models, the softer and more flexible it will be. Low viscosity, easy to cool. Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 20-40mm/s Recommended Print Temperature: 185-215°C Recommended Hotbed Temperature: Hotbed not required Net weight: 0.5kg with spool Gross weight: 0.85kg Length:1.75mm(0.5kg)=165m TPU Printing Tips: TPU has rubber elasticity, for soft material printing, speeds need to be set a little slower, around 30-50mm/s. The printing accuracy of soft materials should be set a bit larger. If you set the height of the layer to be too small, it can be difficult to print, a layer height of 0.3mm or 0.4mm can achieve very fine and smooth results. The operation can be more difficult than other materials. Most flexible filament printing issues are related to model extrusion structure, feeding needs an active drive extruder. Because it is a soft and elastic material, TPU can occasionally get stuck on the bite gear due to resistance, Aim for high temperature and slow printing, and keep it free from dragging and snagging. Because the TPU itself is particularly fluid, particularly delicate, set the accuracy of printing 0.3mm can achieve the accuracy of PLA 0.1mm!
SUNLU TPU 2x500g Flexible 3D Printer Filament: Make Bendy Models And Prints SUNLU 2x500g TPU Flexible 3D Printer Filament: Make Bendy Models And Prints, from NSE Imports #2.
SUNLU
Ships from: The UKShips from UK to UK only
SUNLU TPU 2x500g Flexible 3D Printer Filament: Make... from £30.95
Get flexible and playful with SUNLU TPU filament! Perfect for bendy models and prints that need a little give. This material is easy to print and stays stretchy even in lower temps. Plus, it can handle more wear and tear and oils than other filaments! TPU filament, unlike other stiffer thermoplastics, has qualities that include flexibility and conformity. It also has excellent interlayer adhesion and no curling or delamination during the 3D printing process. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. TPU Features: TPU flexible filament is non-toxic, easy to feed, easy to forming, high toughness and resilience material. Ideal for print children’s toys, shoes, etc. Costume and Cosplay Parts 100% no bubble 3d printer material. When printing thinner and less filled models, the softer and more flexible it will be. Low viscosity, easy to cool. Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 20-40mm/s Recommended Print Temperature: 185-215°C Recommended Hotbed Temperature: Hotbed not required Net weight: 0.5kg with spool Gross weight: 0.85kg Length:1.75mm(0.5kg)=165m TPU Printing Tips: TPU has rubber elasticity, For soft material printing, speeds need to be set a little slower, around 30-50mm/s. The printing accuracy of soft materials should be set a bit larger. If you set the height of the layer is too small, it can be difficult to print, a layer height of 0.3mm or 0.4mm can achieve very fine and smooth results. The operation can be more difficult than other materials. Most of flexible filament printing issues are related to model extrusion structure, feeding needs an active drive extruder. Because it is a soft and elastic material, TPU can occasionally get stuck on the bite gear due to resistance, Aim for high temperature and slow printing, and keep it free from dragging and snagging. Because the TPU itself is particularly fluid, particularly delicate, set the accuracy of printing 0.3mm can achieve the accuracy of PLA 0.1mm!

Free Tracked Shipping*

*Some countries may have a small delivery charge due to disproportionately high shipping.

Fully secured payments

All our payments are handled by secure methods, we'll never see or ask for your payment details.

Friendly service

We pride ourselves on great service, no matter the order value, we want you to be satisfied with it.