Vinyl and Turntable Tech

These handy Head-shell rulers ensure you get your turntable cartridge set just right. As any vinyl lover knows, a poorly aligned cartridge will give poor sound quality and can lead to excessive wear on both the stylus and record. To use simply place the ruler on top of your record and measure from the front and side to ensure your head-shell is sitting level and square to the record. Ideal for use with all types of cartridges and head-shells and tonearms, from brands such as Rega, SME, Shure, Ortofon, Audio Origami, Linn, Pro-Ject, Audio-Technica, Fluance, Technics, Thorens, Garrad and more. Leveling Tips Leveling a tonearm and cartridge is both simply and a little bit or an art from, to ensure the best results you may need to consider the following: A Head-shell mount kit with spare washers, shims, nuts and bolts. This helps to level the phono cartridge in the shell. Consider your LP collection as part of your leveling strategy, heavy weight LP's are thicker and will require the arm to sit higher than thinner discs (leading to uphill or downhill sloping of the cartridge). Ideally measure with the thickest disc in your collection and then use a thin mat to sit thinner records on. This can save both re-levelling work and wear on your equipment and records. Check your downforce with a turntable weighing scale to ensure that the head in not exerting to much force after you have levelled it. A small adjustment may be required to balance the tone arm back to correct downforce. Specifications Dimensions (W x H x D): 61*49*10mm Dimensions (W x H x D): 2.4*1.9*0.4inch Item name: Azimuth Ruler, Head shell Square, Tonearm Calibration Ruler

This LP528B 50 Hz Black 280g Record Weight LP Disc Stabilizer Turntable Vinyl Clamp HiFi will keep your vinyl firmly in place and eliminate slipping or sliding, with a level for proper tracking and a strobe guide to ensure correct speed. It also features a soft pad to protect your collection from damage. Note: This is only suitable in 50Hz countries; if you're unsure of your country's frequency, search 'Mains electricity by country' on Wikipedia or contact us. Specifications: Frequency: 50Hz (UK and other 50Hz mains frequency countries) High Quality Non-Magnetic Alloy Weight Accommodates spindle diameter up to 7mm, heights up to 23mm Soft base pad assures protection of the record label Strobe scale support: 33rpm and 45rpm Product height: 33mm (1 5/16") Product diameter: 77mm (3") Product weight: 280g Package: 1x 528B LP Clamp Material: Aluminium Alloy Treatment: Anodized

Treat your turntable to this high quality 320g weight, stop slips and slides by firmly holding your vinyl in place, the integrated level allows you to make sure your turntable is sat level for optimum tracking. The base of the weight features a soft pad to prevent damaged to your vinyl collection. Specifications: High Quality Non-Magnetic Alloy Weight Accommodates spindle diameter up to 7mm, heights up to 40mm Soft base pad assures protection of the record label Sufficiently eliminates warped records wobble, holds the record flat against the platter, improved the sound quality. Weight distribution is centred nicely by bottom pad. Product height: 41mm Product diameter: 77mm (3") Product weight: 320g Package: 1x 320B LP Clamp Material: Aluminium Alloy Treatment: Anodized