3D Printer Filament

ERYONE PLA Filament is a premium 3D printing material, made from high-quality virgin plastic and available in a vibrant range of colours. Their vacuum-sealed packaging keeps the filament fresh, while our tangle-free winding and precise tolerances ensure smooth, reliable prints every time. And now, their filament comes on eco-friendly, fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]:  6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE Ultra Silk PLA Filament is a high quality PLA Filament, ideal for making parts and models with a high gloss shine. It produces models with a very high gloss metal surface and strong metal texture, brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.  Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Ultra Silk Texture: Extremely fine and smooth on the print surface. Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: High Gloss Shine Silk Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx) Net Weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Bring the warmth of wood to your 3D prints with Eryone Wood PLA filament. This filament combines PLA with wood fibres, creating a unique material with a wood-like texture and finish. Available in light and deep wood tones, your prints will look stunning. Great for sculptures, cosplay and model making. Features: Wood-Like Texture: Has a great wood-like texture, made with wood fibre. High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm. No Tangling: Perfect winded filament PLA, 100% tangle-free before unopened, neatly rolled, no curling or warping. High Compatibility: Universal compatibility with diverse 99% common-used FDM 3D printers in market. Vacuumed Sealed Packaging: The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust. Specifications: Filament Diameter: 1.75mm Finish: Wood Tolerance: ± 0.03mm Print Temperature: 200-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx.) Net weight: 1kg (approx.) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top

P-Glass Filament is the latest in advances for 3D printers, using a mix of PolyCarbonate and PETG it can produce prints with a glass effect similar in strength to ABS prints. This is not your regular filament so please read the note below to ensure you have great results. The 'Glass Fibre' is a cloudy fiber in appearance but strong like the transparent options. Glass Fiber P-Glass Filament 1.75mm High Transparency, PC & PETG Composite 3D Printer Filament better than ABS. Features: The composite polymer material of PC and PETG imitates glass material; it has high transparency, good rigidity, toughness and strength; its transmittance is more than 92%, haze is 0.2%, and its optical performance is better than that of glass. . Color: Transparent Wire diameter: 1.75mm Net weight: 0.5 or 1kg / Gross weight: approx 1.4kg Printing temperature: 200-220°C Hot bed temperature: 60-100°C Printing thickness: 0.3mm/0.5mm thick shell, strong and rigid P-glass printing test experience: Temperature test: filament comparison at 170,180, 190, 200 and 210°C It is impossible to melt and extrude if below 170°C, from 170 to 190°C extrusion may come out white or cloudy or with a matt finish due to incomplete melting, similar to PLA transparent material extrusion. At 200 to 210°C, the filament is transparent, glossy and bright, and the transparency is similar to that of glass; Therefore, the printing range of 200-220°C is recommended. Printing difficulty: P-glass printing difficulty coefficient is higher than PLA, but it is still easy to print. The material itself has better rigidity, firmness and toughness than PLA. It can print thin shell objects, or single-layer appearance. Thin walls less than 1mm can also be printed, P-glass is very strong. However, when printing with P-glass, pay attention to the first few layers of the bottom contacting the platform. When the printer is leveling, the distance between the nozzle and the platform needs to be be well controlled, if the distance is too large, P-glass is may cool and curl on the platform, with potential for the nozzle to drag the filament away, resulting in unsuccessful printing of the previous layers. If the distance is too close to the platform when the nozzle is leveled, the front layers will lead to poor discharge when printing, the front layers will not be very flat when printing, the poor discharge will lead to more burrs at the bottom, the nozzle will absorb burrs when moving, and the longer printing time will accumulate more and more burrs on the nozzle wall, so it is necessary to peel off the filament from the nozzle wall in time Once the bottom layers are printed, it is similar to PLA to continue to print on the top layer. It is recommended to print objects with simple structure such as thin shell, water cup, lampshade, etc. and objects with regular direction in each layer. It is not recommended to print objects with complex structure such as: objects with many empty walks and nodes in each layer; the thicker the printing is, the less transparent the P-glass is, the thinner the layer the better for transparency, but test with smaller prints first.

JAYO PLA Filament is a high-quality, eco-friendly filament that is perfect for beginners and experienced 3D printing enthusiasts alike. It's compatible with most FDM 3D printers and is known for its ease of use and excellent print quality. Whether you're creating functional parts or decorative objects, JAYO PLA Filament is a versatile and reliable material that can help you bring your 3D printing projects to life. Click here to search for more great filament by JAYO. Click here to search for more great filament by JAYO. Benefits of JAYO PLA Filament: Eco-Friendly: Made from renewable resources, PLA is a sustainable and environmentally friendly filament. Easy to Print: PLA has a low melting point and minimal warping, making it easy to print with. High Print Quality: PLA produces high-quality prints with excellent layer adhesion and minimal stringing. Wide Range of Colours: Available in a wide range of vibrant colours, JAYO PLA filament allows you to create colourful and eye-catching 3D prints. Specifications: Wire diameter: 1.75mm Tolerance: ±0.02mm Printing temperature: 200-235℃ Bottom plate temperature: 50-65℃ glue not required. Glue required is using a non-heated bed Rally (KGF): 8-13 Melt index: 3-7g/10min (190℃, 2.16kg) Elongation at break: 4% Printing speed: 50-100mm/s Air bubbles: 100% zero bubbles Net weight: 1kg/roll approx. Gross weight: 1.3kg/roll approx. Length: 1.75mm(1KG)=320m approx.

JAYO Matte PLA Filament is a high-quality, bubble-free filament that offers a unique matte finish for your 3D printing projects. It's compatible with most FDM 3D printers and is easy to print with. The unique matte finish of this filament eliminates the glossy sheen often associated with PLA, providing a more sophisticated and elegant look to your 3D printed creations. Click here to search for more great filament by JAYO. Click here to search for more great filament by JAYO. Benefits of JAYO Matte PLA Filament: Unique Matte Finish: This filament produces prints with a smooth, matte finish, eliminating the glossy sheen often associated with PLA. High Print Quality: Matte PLA offers excellent layer adhesion and minimal stringing, resulting in high-quality prints. Easy to Print: It's easy to print with and doesn't require special settings or equipment. Versatile Applications: Ideal for a variety of applications, including decorative items, functional objects, and prototypes. Specifications: Wire diameter: 1.75mm Tolerance: ±0.02mm Printing temperature: 200-235℃ Bottom plate temperature: 50-65℃ glue not required. Glue required is using a non-heated bed Rally (KGF): 8-13 Melt index: 3-7g/10min (190℃, 2.16kg) Elongation at break: 4% Printing speed: 50-100mm/s Air bubbles: 100% zero bubbles Net weight: 1kg/roll approx. Gross weight: 1.3kg/roll approx. Length: 1.75mm(1KG)=320m approx.

JAYO PLA Meta Filament is a high-quality, eco-friendly filament that offers improved performance over traditional PLA. It's compatible with most FDM 3D printers and is easy to print with. With its improved flowability, increased toughness, and enhanced layer adhesion, JAYO PLA Meta Filament is a great choice for both beginners and experienced 3D printing enthusiasts. It offers a more refined printing experience and allows you to create high-quality, durable 3D printed objects. Click here to search for more great filament by JAYO. Click here to search for more great filament by JAYO. Benefits of JAYO PLA Meta Filament: Improved Flowability: PLA Meta has a lower melting temperature and better flow properties, which allows for smoother and faster prints. Increased Toughness: PLA Meta is generally tougher and more impact-resistant than regular PLA, making it more suitable for functional parts. Enhanced Layer Adhesion: It often exhibits better layer adhesion, resulting in stronger and more durable prints. Specifications: Wire diameter: 1.75mm Tolerance: ±0.02mm Printing temperature: 180-200℃ Bottom plate temperature: 50-65℃ glue not required. Glue required is using a non-heated bed Rally (KGF): 9-12 Melt index: 8-12g/10min (190℃, 2.16kg) Elongation at break: 35% Printing speed: 50-100mm/s Air bubbles: 100% zero bubbles Net weight: 1kg/roll approx. Gross weight: 1.3kg/roll approx. Length: 1.75mm(1KG)=320m approx.

JAYO PLA+ Filament is a high-quality, bubble-free filament that is compatible with most FDM 3D printers. It's an excellent choice for a variety of 3D printing projects, offering several advantages over standard PLA. PLA+ is significantly stronger and more impact-resistant than regular PLA, making it ideal for functional parts and durable objects. Its reduced warping tendency ensures cleaner and more accurate prints. The improved layer adhesion leads to smoother surface finishes and stronger prints. Additionally, PLA+ generally produces higher-quality prints with finer detail and better dimensional accuracy. These enhanced properties make JAYO PLA+ Filament a versatile and reliable material for both hobbyists and professionals. Click here to search for more great filament by JAYO. Click here to search for more great filament by JAYO. Benefits of PLA+ Filament: Improved Strength and Toughness: PLA+ is significantly stronger and more impact-resistant than regular PLA, making it ideal for functional parts and durable objects. Reduced Warping: PLA+ has a lower propensity for warping, resulting in cleaner and more accurate prints. Better Layer Adhesion: PLA+ exhibits improved layer adhesion, leading to smoother surface finishes and stronger prints. Enhanced Print Quality: PLA+ generally produces higher-quality prints with finer detail and better dimensional accuracy. Specifications: Wire diameter: 1.75mm Tolerance: ±0.02mm Printing temperature: 210-235℃ Bottom plate temperature: 70-80℃ Rally (KGF): 11-15 Melt index: 9-11g/10min (190℃, 2.16kg) Elongation at break: 45% Printing speed: 50-100mm/s Air bubbles: 100% zero bubbles Net weight: 1.1kg/roll approx. Gross weight: 1.3kg/roll approx. Length: 1.75mm(1KG)=320m approx.

JAYO Silk PLA Filament is a high-quality, bubble-free filament that offers a luxurious, glossy finish for your 3D printing projects. It's compatible with most FDM 3D printers and is easy to print with. With JAYO Silk PLA Filament, you can create stunning 3D printed models with a luxurious, silky smooth finish. Click here to search for more great filament by JAYO. Click here to search for more great filament by JAYO. Benefits of JAYO Silk PLA Filament: High-Quality Glossy Finish: This filament produces prints with a smooth, glossy finish that resembles silk, adding a touch of elegance to your 3D printed creations. Excellent Layer Adhesion: Silk PLA exhibits excellent layer adhesion, resulting in strong and durable prints. Easy to Print: It's easy to print with and doesn't require special settings or equipment. Versatile Applications: Ideal for a variety of applications, including decorative items, functional objects, and prototypes. Specifications: Wire diameter: 1.75mm Tolerance: ±0.02mm Printing temperature: 200-235℃ Bottom plate temperature: 50-65℃ glue not required. Glue required is using a non-heated bed Rally (KGF): 8-13 Melt index: 3-7g/10min (190℃, 2.16kg) Elongation at break: 4% Printing speed: 50-100mm/s Air bubbles: 100% zero bubbles Net weight: 1kg/roll approx. Gross weight: 1.3kg/roll approx. Length: 1.75mm(1KG)=320m approx.

JAYO TPU Filament is a flexible and durable filament that is ideal for 3D printing soft and elastic parts. It is compatible with most FDM 3D printers and is known for its excellent flexibility and impact resistance. With its combination of flexibility, durability, and versatility, JAYO TPU Filament is a popular choice for both hobbyists and professionals seeking to create soft and functional 3D printed parts. Click here to search for more great filament by JAYO. Click here to search for more great filament by JAYO. Benefits of JAYO TPU Filament: Excellent Flexibility: TPU is highly flexible and can be bent and stretched without breaking. Impact Resistance: It is highly resistant to impact, making it suitable for protective parts and shock absorbers. Good Adhesion: TPU exhibits good layer adhesion, resulting in strong and durable prints. Wide Range of Hardness: TPU is available in various Shore A hardness ratings, allowing you to choose the right flexibility for your specific application. Specifications: Wire diameter: 1.75mm Tolerance: ±0.02mm Printing temperature: 205-230℃ Melting point: 52℃ Bottom plate temperature: No heated bed required, glue recommended Melt index: 5-8g/10min (190℃, 2.16kg) Elongation at break: 600% Printing speed: 20-40mm/s Air bubbles: 100% zero bubbles Net weight: 500g/roll approx. Gross weight: 700kg/roll approx.