ERYONEERYONE ABS 1.75mm 3D Printing Filament 1kg Ideal... $34.79
Ships from: The UKShips from UK to UK only
ERYONE ABS filament is a new material designed to durable and heat resistant prints. It's great for mechanical parts and parts needing a high heat resistance. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with most 3D Printers that support 1.75mm ABS filament. NOTE: Requires good ventilation during printing due to stronger fumes that are typical with ABS. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 230-260°C Heated Bed Temp: 90-110°C Fan Speed: None to Minimal Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
SUNLUSUNLU ABS Filament Great for rigid prints: Suits... $38.66
Ships from: ChinaShips from China to most countries
SUNLU ABS 3D Printer filament is great for projects requiring a more rigid, higher temperature resistant and machinable print. It's a great choice for engineers and others where mechanical uses are important. ABS is one of the most commonly used engineering plastics, it’s a recommended material for beginners because of the loose temperature requirement during extrusion process. Provides excellent performance for 3D printers requiring 1.75mm filament, including Creality, Artillery, SUNLU, Geeetech, Makerbot, Mendel, reprap, UP, Prusa, Huxley, uPrint, Cubify, printrbot, Sumpod Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. Features: Has excellent impact strength and wear resistance; Chemical resistant Requires a heated bed plate on your printer Ideal for strong print strength requirements Suitable for printing small parts Specifications: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 230-270℃ Floor temperature: 80-120℃ Tension (KGF): 6-11 Melt index: 12-19g/10min Elongation at break: 25% Print speed: 50-100MM/s Bubbles: 100% zero bubbles Net weight: 1 KG/roll Gross weight: 1.3 KG/roll approx. Length: 1.75MM(1KG)=395M approx.