Description: The Geeetech 3D-Touch Module, provides a BL-Touch compatible upgrade to many 3D printers to assist with bed levelling issues. A flat bed is one of the most critical things for a successful 3D print, an uneven bed can cause issues with the first layers not siting on the bed correctly. There is also the issue of the bed becoming slightly out of line after a long or large print. Once installed and set up your 3D printers can allow and adjust for the slight variances to ensure optimum printing conditions and reduce failure rates from a slightly off bed level. Installation varies between printers, however the general principal is similar enough. Firstly mount the BL-Touch unit to your printer (you may need to print a mount). Secondly hook up the connections (a lot of printers have a 'BL-Touch' connector on the extruder assembly, some older ones may require wiring to the mainboard). Finally activate the 'Auto Level' feature in a menu or through updating the firmware. Features: All the cool details Easily upgrade your 3D printer to Auto Levelling High precision touch sensor Compatible with many brands of 3D printer such as Creality, Anet, SUNLU, Artillery, Geeetech and more. Self-test: The push pin is operated three times to test when the power is on Alarm: The LED light blinks if a problem found on a self-test or on an operation 3DTouch"s Standard Deviation in repeatability is around 0.02mm. If you choose 3DTouch, your 3D printer will be high-class masterpiece, giving you an enjoyable experience. 3DTouch does not uses either optical, nor proximity (inductive/capacitive) sensor. 3DTouch is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely. This is an auto leveling sensor for 3D Printers based on open-source. Simple, Smart, High-precision, It could work with any kinds of bed materials, such as glasses, woods, metals, and so on. It can be operated in the following conditions: One I/O for control (PWM or Software PWM) One I/O for Zmin(Z Probe) GND and +5V power Specifications: The technical stuff Model: 3D-Touch (BL-Touch compatible) CPU: Atmel ATtiny13A Voltage: 5V Current: 15mA Max. Current: 300mA Cable length: 150mm Weight: 10g Wiring: 3-pin: Brown (-, GND) Red (+5V) Orange (control signal) and 2-pin: Black (-, GND) White (Z min) Dimensions: Notes: Additional power supply can be needed in case which your board does not supply enough amperage. Electronic devices can be damaged or even destroyed if connected to the wrong side polarity. [wrong terminal connect to 5V(+) and GND(-)] Install 3D-Touch/BL-Touch as far as possible from magnetic, motor, fan etc. Please handle the measuring pin with care, hard pushes or pulls can make the 3D-Touch/BL-Touch less accurate. Fix push-pin with locking paint after reassembling or adjusting core. Please do not change the position of the hex screw(core). Do not separate or deform elastic material attached on the push-pin. Package includes: 1 X Sensor 1 X 3Pin Straight Pin 1 X 2Pin Straight Pin 2 X Screw & Nut & Washer 2 X Dupont Housing Shell 3Pin 2 X Dupont Housing Shell 2Pin 10X Dupont Terminal 1 X 10KΩ 1/8W Resistor for Smoothieboard Additional Images and Videos: More images of this item. Links and Resources: Manual, links and resources to help you get more from this item. Geeetech 3DTouch Product Page Geeetech 3DTouch Wiki Geeetech 3D-Touch Manual (pdf) Geeetech 3DTouch YouTube Playlist Geeetech Facebook Group ⠀ Thingiverse Bl-Touch Mount Prints YouTube Bl-Touch Mount Videos
These Creality Stepper motors are great for both repairing and upgrading your 3D Printer, as used in their own 3D printers such as the Ender-3 they are smooth and precise in motion. Suitable for use with other brands of 3D printer using the same spec steppers. Also ideal for CNC, Engravers and similar that also use this specification of stepper. Specifications:Brand: Creality 3D Item name: RepRap 42 Stepper Motor Item number: 42-40 Step angle: 1.8 degrees Nominal Voltage: 4.83VCurrent Rating: 1.5 (A) Rated speed: 1-1000 (rpm) Rated torque: 0.4 (NM) Ambient Temperatuar: -20°C~+50°C Length: 40mmApplication: 3D printer Package Included:1x 42-40 Stepper motor
Advantage: - Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! - Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. - Dustproof and good noise reduction - The interior uses Pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure, and will not spread. - Stable Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space. Features: Upgrade version easy to install, can be folded for efficient storage, and is even equipped with pockets to hold necessary tools. You can easily access the printer by unzipping the front of the enclosure, which features a seethrough screen for full-time monitoring. The main purpose of the 3D printer enclosure is to help maintain a constant temperature inside of the print chamber, while also keep external weather out. Overall, this serves to improve print quality and stability. Featuring an interior made from flame-retardant aluminum film, Creality that it can prevent any potential fire from spreading outside of the enclosure. On top of that, this tiny abode reduces noise from the printer, offers extra breathing room for the machine, and is also dustproof. Specifications: Product: Big enclosure Brand: Creality 3D Function: Constant temperature / Soundproof / Dustproof Size(Expanded overall dimensions): 70*75*90cm Size that can be accommodated: 750*700*900mm Applicable models: Ender-3/Ender-3 pro/Ender-5/5 pro/5 plus/CR-10/10S/10Pro/10MINI/10 V2/CR-X/CR-20/20pro Not suitable: CR-10 Max/CR-10 S4/S5 G.W: 3.84KG Package Included: 1 x 3D printer big enclosure Kit (440 Iron pipesx4 / 560 Iron pipesx4 / 645 Iron pipesx4 / fixed-angle bracketx8 / folding shed x1)
Upgrade your 3D Printer 220x220mm build surface with this flexible Cmagnet plate by Tronxy, simply attach to your existing build surface (remember to reset your Z axis as the height will now be different) and when your print is finished simply peel the top layer off to easily remove your prints. Description: - Upgrade Cmagnet Build Surface plate - Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing. Specifications: Brand: Tronxy Size: 220*220mm Applications: For 3D printer heated bed Package Includes: 1x Top magnet plate 1x Bottom magnet plate
Upgrade your Creality Printer with this high quality glass platform, with it's high quality micropore coating your models have a smooth yet slightly gripped surface to print on yet easily removable at the end of the print. Suitable for most Creality 510mm square printers, will likely suit other brands of 3D printer with a similar size print surface.Features: Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large model. Ultrabase integrated with heated bed: Super Flatness, Fast and uniform heating. Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400°C. Easy to clean: Ultrabase is easy to clean by alcohol/water. Note: Due to the different product batches, the position of the logo in the glass plate may change, thank you for your understanding. Specifications: Size: 510*510*4mm Material: Carbon Silicon Glass Application: For Creality CR-10S5 3D printer Package Included: 1x Creality 3D® Glass Platform Temperature Settings For Different Filaments: PLA: 50-65°C ABS: 80-120°C PC: 100-125°C Nelon: 100-130°C PP: 100-130°C PETG: 70-90°C TPU: 40-60°C
These durable brackets are a great upgrade to your Ender 5, 5 Pro or 5 Plus 3D Printer, ensure your frame is square and rigid to ensure your models (especially larger models) come out perfect every time. They are also widely used for building 3D printer KOSSEL, CNC router and robotics projects. Suitable for most aluminum profiles of the series 20, T-profile. 15x angle connector with screws and hammer nut. For easy and inexpensive connection. As in the picture, for DIY projects. For aluminum profiles, strut profiles, connection technology and accessories. Aluminum profile at an angle of 90 degrees to join. Suitable for most Metric Aluminum Extrusion Series 20. colour:Silver Material:aluminum Size: 20x20x17mm Package Contents: 15x 2020 Angle Bracket 30x m10 hexagon socket screws 30x m5 square slider 30x T-nut 30x spacer Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Package included: 1 x TFT Display Kit
Upgrade your Creality 3D* 235x235mm build surface with this flexible Cmagnet plate, simply attach to your existing build surface (remember to reset your Z axis as the height will now be different) and when your print is finished simply peel the top layer off to easily remove your prints. *Will fit most 235x235mm build surface printers if you don't mind having a big Creality Logo on the build plate 😃 Description: - Upgrade Cmagnet Build Surface plate - Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing. Specifications: Size: 235*235mm Applications: For Ender-3 Package Included: 1x Top magnet plate 1x Bottom magnet plate
Specifications:Product: stretch straighten tensionerApplication: 2020 aluminum profile X-axis Material: aluminum alloySurface treatment: anodizingSuit for Creality CR10 CR10S Ender-3 3D PrinterSize:Package Included:1 x Stretch Straighten Tensioner
Features: 1. Can resistance to high and low temperature, from -190℃ to 280℃ 2. With corrosion resistance 3. Good feed tube for 3D printer 1.75mm filament Specifications: Length: 5 meter Diameter: 2mm*4mm(inner hole*outer diameter) Color: Milky white Temperature: -190℃ to 280℃ Package Included: 1x Creality 3D® 5M 3D Printer Teflon Tube ,,,
Prusa i3 MK2.5S MK3S MMU2S Filament Spool Holder Shelves Supplies Material Tray Rack For Prusa i3 MK2.5S/MK3S Multi Material 2S Product features： This great little product enables you to feed your filament easily and quickly to your 3D printer, ideal if you tend to swap spools as you can quickly grab the end and feed it in without having to take your mounted spool off the printer. The design allows for the spool to smoothly rotate while ensuring there is a smooth and snag free feed. Made of Plastic Material,w ith the 608ZZ bearing , Fit for 3D Printer 95mm Filament Spool Roller, Supplies. Compatible for Prusa i3 MK2.5S MK3S MMU2S Filament Stably 3D Printer Filament Tabletop Mount Rack Frame Tray Holder Bracket. Package listing: filament spool holder*1 (Don't include the filament)
These Creality Stepper motors are great for both repairing and upgrading your 3D Printer, as used in their own 3D printers such as the Ender-3 they are smooth and precise in motion. Suitable for use with other brands of 3D printer using the same spec steppers. Also ideal for CNC, Engravers and similar that also use this specification of stepper. Specifications:Brand: Creality 3D Item name: RepRap 42 Stepper Motor Item number: 42-40 Step angle: 1.8 degrees Nominal Voltage: 4.83VCurrent Rating: 1.5 (A) Rated speed: 1-1000 (rpm) Rated torque: 0.4 (NM) Ambient Temperatuar: -20°C~+50°C Length: 40mmApplication: 3D printer Package Included:1x 42-40 Stepper motor
Specificaitons Model MK-8-T Material Aluminum+stainless steel+brass Voltage 12/24V 40W Resistance R(25°C)= 100k±1% In and out two in and one out Connection Method external line connection Cable length 1.2 M Nozzle 0.4mm Operating temperature 270 °C Application 3D printer Net weight 76g Gross weight 85g Package Included: 1x Extruder Hot End Kit
Features: Material: Brass Size: 0.2/0.3/0.5mm Package includes: 3 x Adapter Nozzle
Features: It using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug Board Size: Approx. 39 x 16 x 7mm / 1.54 x 0.63 x 0.28 inch Cable Length: Approx. 70 cm / 27.56 inch Connection Description: Red line connecting VCC (ramps of +) Connect the black wire GND (ramps of -) Green Line connection SIGNAL (ramps in s) Tips: Under normal circumstances, the system must be configured to at least three mechanical switches. Package Includes: 5 x 3D Printer Endstop Switch