Soldering Irons and Accessories

This 328pcs Heat Shrink Tube Sleeving Set is ideal for securing your soldering projects. The set includes 8 different sizes and 5 colours for maximum versatility and customization. Made of high quality polyolefin with a 2:1 shrink ratio for superior performance. Features: Over 300 sleeves in a variety of sizes and colours Made of high quality polyolefin material Shrinkage ratio of 2:1 Minimum shrinkage temperature of +70°C Maximum shrinkage temperature of +110°C Operating temperature range of -55°C to +125°C Tensile strength of 10.4 Mpa Dielectric strength of 15kV/mm RoHS compliant Specifications: Supplied internal diameter : 1.0mm, 2.0mm, 3.0mm, 4.0mm, 6.0mm , 8.0mm, 10.0mm, 14.0mm minimum, Fully shrunk internal diameter : 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 7.0mm maximum Colour : Black, Red, Yellow, Blue, Green Shrinkage Ratio: 2:1 (maximum shrinkage to 1/2 its starting diameter) Material : Polyolefin Minimum Shrinkage Temp : +70°C Maximum Shrinkage Temp : +110°C Operating Temperature : -55°C to +125°C Tensile strength : 10.4 Mpa Dielectric strength : 15kV/mm RoHS Compliant. Package Includes: Quantity x Supplied internal diameter x Single length 120pcs x 1.0 x 40mm 60pcs x 2.0 x 40mm 32pcs x 3.0 x 40mm 32pcs x 4.0 x 40mm 32pcs x 6.0 x 40mm 20pcs x 8.0 x 80mm 16pcs x 10.0 x 80mm 16pcs x 14.0 x 80mm

Enhance your workspace with this large 45x30cm desk mat. The heat resistant mat provides protection against burns on desks and workbenches, while the built-in magnetic storage areas keep your parts and tools organized and secure. Increase productivity and safety while soldering with this expertly designed desk mat. Features: Multi-function silicone pad structures with a circuit board location, screw location, 3 parts compartments with covers, a magnetic tools area, 3 magnetic parts areas, 7 non-magnetic parts areas, a scale ruler, and 42 spare cells. Screw Location with 124 tiny cells, can place and secure 124 different screws in order. High Temperature Resistance, up to 500 °C. Several hole location to set screws, IC chips and small parts. Built-in scale ruler (0 ~ 36 cm) along the bottom edge. Magnetic sections (marked on the pad), can be used to hold screws firmly. They can also be used to magnetise your screwdrivers. Specification: Type: Heat insulation pad Net weight: 655 g Size: 45 x 30 cm / 17.7 x 11.8 inch Thickness: about 5 mm Heat resistance: 500 °C Material: Environmentally friendly organic-silicone Colour: Blue Please Note: The pad may have some stuck dust or other minor appearance defects from new.

These Ceramic tipped tweezers are ideal for both soldering and elctrical work. Able to withstand high temperatures they are ideal for soldering smaller components with risk of deformation. For electrical work the non conductive Cermaic tips help prevent accidental shorts from brushing against other components. Features & Specifications: Ceramic tips are non magnetic and non static, suitable for the precision operation of sensitive electronic components The Ceramic tweezer tips have a strong resistance to heat, can withstand 1600°C without cracking Material: Stainless Steel, Ceramic Size: 12.5cm Color: Black/Silver Package contents: 1 x Ceramic Tipped Tweezer

The LF-08D smart soldering iron is a multi-functional soldering iron, small, portable and ideal for most soldering work. Able to use any PD or QC fast charge protocol USB Power Supply you do not need to carry a large heavy mains adapter with you, it will even run from a suitable output USB Power Bank for soldering when no mains supply is available. The easy to use OLED display gives you precise control over the soldering iron. The LF-08D has interchangeable tips and supports the common T12 5.4/5.5mm diameter tips used by a wide range of similar portable irons. Features: Support 9~20v working voltage range, see our chart for details. Fast heating, can melt tin solder in 8 seconds @20v. Fast temperature recovery, easy to avoid cold solder joints. Temperature control stability is within 2%. Smart sleep. Saves power and cools iron if left unused Small size, easy to carry. Rubberised Handle Selectable operating voltage of 9, 12, 15 or 20v (Default setting is 20v) Ergonomically designed handle, good grip. Requires a USB PD/QC Power Supply or Power Bank (Not Supplied) Input Voltage Input Current Output Power Ready To Use Input Voltage 20v Input Current ≥3.25A Output Power 65W Ready To Use 8 Seconds Input Voltage 15v Input Current ≥2.5A Output Power 37.5W Ready To Use 12 Seconds Input Voltage 12v Input Current ≥2A Output Power 24W Ready To Use 17 Seconds Input Voltage 9v Input Current 1.5A Output Power 13.5W Ready To Use 30 Seconds Specifications Model Number: LF-08D Certification: CE Dimensions: 230x15x15mm Temperature Stability: 2% Input Voltage: 9-20V (Will not function below 9V) Output Power: 13.5-65W Output Temperature: 200~480°C Screen Type/Size: OLED 0.87in 128*32 Pixels Tip Size: T12 120mm*5.4/5.5mm Power port: USB Type A Menu Overview Long press the SET button for 3s to enter SETTING mode, the functions are as follows: Sleep time setting: default 10 minutes, 1-60 minutes adjustable Shutdown time setting: default 20 minutes ，1-60 minutes adjustable Step adjustment setting: default 5°C, 1-10°C adjustable Unit switch setting: °C/°F Language setting: Chinese/English Temperature calibration 1: Press “+/-” button to adjust the setting temperature, then long press SET key for 3s to Save and automatically return to the user interface. Temperature classification: on off Max Temperature limits: Level 1 (Default) 300°C, Level 2 380°C, Level 3 430°C Restore the default: On/Off Temperature lock function: Long press the SET button for 5 seconds, the temperature will be locked at the current set temperature, press other buttons without response, if you need to unlock , long press SET button for 5 seconds 1 Temperature calibration method: Set the target temperature to 350°C, use a soldering iron thermometer to measure the actual temperature after the temperature is stable, record the difference between the target temperature and the actual temperature (the value can be positive or negative), and then enter the menu and set the adjustment.