Other Brands of 3D Printer Filament (6)
Aside from our main brands we also carry a wide variety of filament from Smaller names that provide high quality print in both standard materials such as PLA, PETG, TPU, ABS, but also exotic materials such a Luminous, Carbon Fiber, Glass Fiber Polycarbonate and more.


EasyThreed
TPU 3D Printing Filament 1.75mm Flexible No Bubble...
from $17.89
Ships from: ChinaShips from China to most countries
Print flexible parts and models with this high quality TPU filament, ideal for wheels, belts, phone cases (maybe in conjunction with a harder shell in another material), cosplay costumes, bushes and more.
Features:
Thermoplastic polyurethane (TPU) is a high strength flexible filament, including elasticity, transparency, and resistance to oil, grease and abrasion. It's flexible, can be bent to 360 degree. Technically, they are thermoplastic elastomers consisting of linear segmented block copolymers composed of hard and soft segments.
TPU can be easier to print with, with great layer-to-layer adhesion. Flexible material has many applications including automotive instrument panels, caster wheels, power tools, sporting goods, medical devices, drive belts, footwear, inflatable rafts, and a variety of extruded film, sheet and profile applications. TPU is also a popular material found in outer cases of mobile electronic devices, such as mobile phones. It is also used to make keyboard protectors for laptops.
Specially formulated TPU 3D Printers Filament, Clog-Free, Bubble-Free, stable in performance/
Dimensional Accuracy and Consistency, +/- 0.05 mm tolerance and 1.75mm diameter without any exaggeration. It consistently provides optimum flow through the extruder nozzle. Most 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments. Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc.....
Environmental Friendly . it complies with the Restriction of Hazardous Substance directive and are free from potentially hazardous substances.
Specifications
Diameter: 1.75mm
Tolerance: +/- 0.05mm
Hardness: 95A
Density: 1.25±0.05g/cm3
Extruder Temperature: 190-230°C
Printing Speed: 30-60mm/s
Bed Temperature: 40°C
Layer height: 0.1-0.4mm
Printing tips
Slow down the speed, 10-20mm/s
Not suitable for printing models that are too high, because the higher the model, the upper portion of the model can move or sway
Because the consumables themselves are flexible, the printer's filament feed and extruder design must support it.
Printing temperature: 190-225°C
The distance between the wire feeding gear and the nozzle should be short


Flashforge
Flashforge PLA 3D Printer Filament: UK Stock 1kg...
$28.15
Ships from: The UKShips from UK to UK only
Flashforge PLA Filament is a high quality filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Flashforge filament, firmly follows the ISO 9001 quality standards and lean production requirements to ensure each roll of 3D filament produces great results.
Features:
Environmentally friendly: Flashforge PLA filament 1.75mm is drilled from corn grain, has no odor omitted in use, and passes the EU RoHS certification. Flashforge filament PLA 1.75 is suitable for teenagers and children to use at home or school, harmless to the human body.
High precision: The wire diameter of Flashforge PLA filaments is strictly controlled, with deviation less than 0.05mm. Effectively improving 3D printing effects.
Strong compatibility: Flashforge best PLA materials are applicable to mainstream FDM 3D printers on the market.
Good fluidity after melting: Greatly reducing problems of nozzle plug
High strength: Flashforge PLA filaments ensure high hardness of the printed models. Wear resistant and durable in use.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.05mm
Print Temperature: 190-220°C
Recommended Print Speed 60-90mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Tensile Strength: ≥60 MPa
Elongation at Break: ≥3 %
Flexural Strength: ≥60 MPa
Flexural Modulus: ≥2500 MPa
IZOD Impact Strength: ≥16 J/m
Layer Thickness: 0.1-0.2 mm
Heat Deflection Temperature: ≥55 °C
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.


Flashforge
Flashforge PLA-CF Filament: 1kg Spool, 10% Carbon Fiber,...
$62.77
$64.05
Ships from: ChinaShips from China to most countries
Flashforge Carbon Fiber PLA Filament is a high quality filament, made from high quality virgin plastic and with 10% Carbon Fiber content, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Carbon Fiber PLA is ideal for high strength, lightweight print.
Flashforge filament, firmly follows the ISO 9001 quality standards and lean production requirements to ensure each roll of 3D filament produces great results.
Features:
Environmentally friendly: Flashforge PLA filament 1.75mm is drilled from corn grain, has no odor omitted in use, and passes the EU RoHS certification. Flashforge filament PLA 1.75 is suitable for teenagers and children to use at home or school, harmless to the human body.
High precision: The wire diameter of Flashforge PLA filaments is strictly controlled, with deviation less than 0.05mm. Effectively improving 3D printing effects.
Strong compatibility: Flashforge best PLA materials are applicable to mainstream FDM 3D printers on the market.
Good fluidity after melting: Greatly reducing problems of nozzle plug
High strength: Flashforge PLA-CF filament is upto 1.5x stronger than regular PLA, ensures high hardness of the printed models. Wear resistant and durable in use.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.05mm
Carbon Fiber Content: 10%
Print Temperature: 200-230°C
Heated Bed Temperature: 40-50°C
Recommended Print Speed 60-90mm/s
Printable on Glass Beds: Yes, requires glue
Print using hardened nozzle: Yes
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Tensile Strength: ≥40-45 MPa
Modulus of Elasticity: 1100~1300 MPa
Elongation at Break: ≥11.5~13.5%
Flexural Strength: ≥85~95 MPa
Heat Deflection Temperature: ≥60 °C
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out


Creality 3D
Ender Series 2x1kg PLA Filament: 1.75mm For Ender-3...
$44.82
Ships from: The EUShips from EU to EU and UK only
Creality 3D PLA Plus Filament is a high quality 3D Printer Filament from the makers of some of the most popular 3D printers on the market. Suitable for use with most FDM 3D Printers, These Twin Packs offer great value for larger print jobs.
Great for use with Crealiter 3D Ender-3, Ender-5, CR-10 series and more.
Please note: Creality use two box designs, their older black design with white text and their dragon logo, or a newer white box, we will ship either box depending on stock availability. Please see our images for examples of both box designs.
Features:
Zero Bubbles
High Dimensional Accuracy
Smooth Printing, Minimal Warping
No Tangle Spools
Good Tensile Strength
Consistent Colour
Suitable for all brands of 3D Printers, such as Anet, Creality 3D, Artillery, SUNLU, Makerbot, Prusa etc..
Specifications:
Brand Name: Creality 3D
Origin: China
Material: PLA
Product Name: Creality 3D PLA Printer Filament
Diameter: 1.75mm
Tolerance: ±0.23mm
Print Temperature: 180-215°C
Heated Bed: Optional
Heated Bed Temperature: 45-60°C
Density 1.23g/cm3
Print Speed: 40-100mm/s
Fan Speed: 100%
Melt Index: 5g/10min (190°C/2.16kg)
Tensile Strength: 63Mpa
Elongation At Break: 20%
Bending Strength: 74Mpa
Flexural Modulus: 1973Mpa
lzod Notched Impact strength: 7KJ/m2
Heat Distortion: 53°C,0.45Mpa


Unbranded
Marble 3D Printer Filament 1.75mm PLA Marble 1kg...
from $21.74
Ships from: ChinaShips from China to most countries
1.75mm Marble/Stone Effect PLA Filament, great for making buildings and sculptures. Suitable for use with most brands of FDM style 3D printers such as; Creality, Sunlu, Artillery, Geeetech, Prusa, Makerbot and more.
Great for architectural models, sculptures, busts, model railways, tabletop gaming or any other use where you might want a stone effect print.
Specifications:
Material: PLA
Weight: 500g or 1kg
Filament Diameter: 1.75mm
Recommended Print Temperature: 195-230°C


Erilles
Glass Fiber 3D Printer Filament: 1.75mm High Transparency...
from $46.10
$69.18
Ships from: ChinaShips from China to most countries
P-Glass Filament is the latest in advances for 3D printers, using a mix of PolyCarbonate and PETG it can produce prints with a glass effect similar in strength to ABS prints. This is not your regular filament so please read the note below to ensure you have great results. The 'Glass Fibre' is a cloudy fiber in appearance but strong like the transparent options. Glass Fiber P-Glass Filament 1.75mm High Transparency, PC & PETG Composite 3D Printer Filament better than ABS.
Features:
The composite polymer material of PC and PETG imitates glass material; it has high transparency, good rigidity, toughness and strength; its transmittance is more than 92%, haze is 0.2%, and its optical performance is better than that of glass. .
Color: Transparent
Wire diameter: 1.75mm
Net weight: 0.5 or 1kg / Gross weight: approx 1.4kg
Printing temperature: 200-220°C
Hot bed temperature: 60-100°C
Printing thickness: 0.3mm/0.5mm thick shell, strong and rigid
P-glass printing test experience:
Temperature test: filament comparison at 170,180, 190, 200 and 210°C It is impossible to melt and extrude if below 170°C, from 170 to 190°C extrusion may come out white or cloudy or with a matt finish due to incomplete melting, similar to PLA transparent material extrusion. At 200 to 210°C, the filament is transparent, glossy and bright, and the transparency is similar to that of glass; Therefore, the printing range of 200-220°C is recommended.
Printing difficulty: P-glass printing difficulty coefficient is higher than PLA, but it is still easy to print. The material itself has better rigidity, firmness and toughness than PLA. It can print thin shell objects, or single-layer appearance. Thin walls less than 1mm can also be printed, P-glass is very strong. However, when printing with P-glass, pay attention to the first few layers of the bottom contacting the platform. When the printer is leveling, the distance between the nozzle and the platform needs to be be well controlled, if the distance is too large, P-glass is may cool and curl on the platform, with potential for the nozzle to drag the filament away, resulting in unsuccessful printing of the previous layers. If the distance is too close to the platform when the nozzle is leveled, the front layers will lead to poor discharge when printing, the front layers will not be very flat when printing, the poor discharge will lead to more burrs at the bottom, the nozzle will absorb burrs when moving, and the longer printing time will accumulate more and more burrs on the nozzle wall, so it is necessary to peel off the filament from the nozzle wall in time Once the bottom layers are printed, it is similar to PLA to continue to print on the top layer.
It is recommended to print objects with simple structure such as thin shell, water cup, lampshade, etc. and objects with regular direction in each layer. It is not recommended to print objects with complex structure such as: objects with many empty walks and nodes in each layer; the thicker the printing is, the less transparent the P-glass is, the thinner the layer the better for transparency, but test with smaller prints first.
Free Tracked Shipping*
*Some countries may have a small delivery charge due to disproportionately high shipping.Fully secured payments
All our payments are handled by secure methods, we'll never see or ask for your payment details.Friendly service
We pride ourselves on great service, no matter the order value, we want you to be satisfied with it.Contact Us
Downloads & Resources
3D Printers
Digital Microscopes
Digital Oscilloscopes
Game Controllers
IC Programmers
Respirator Mask Advice
We Happily Accept