LONGER® LK4 Pro Open Source FDM 3D Printer Kit 220*220*250mm Print Size Support Filmant Run-out/Resume Print with TMC2208 Driver/4.3inch Touch Screen LONGER® LK4 Pro Open Source FDM 3D Printer Kit 220*220*250mm Print Size Support Filmant Run-out/Resume Print with TMC2208 Driver/4.3inch Touch Screen
Does not apply
Ships from: UK Warehouse
LONGER® LK4 Pro Open Source FDM 3D Printer Kit 220*220*250mm Print Size Support Filmant Run-out/Resume Print with TMC2208 Driver/4.3inch Touch Screen £163.99

Description: The Longer3D LK4 Pro is a flagship FDM 3D printer from Longer3D, open source, ultra-quiet and high-precision printing. The 4.3-inch touch screen gives you a more intuitive experience; it also has Glass build platform provide a smooth flat surface for your prints. It's an ideal printer for those looking to get started in 3D printing or looking for a lower cost secondary printer for smaller prints. 90% Pre-assembled: The LK4 Pro 3D printer is simplifies assembly. The complicated parts such as cantilever, gantry, and nozzle have been assembled before leaving the factory. 90% of the assembly process is completed in advance. It saves 50% of the assembly time compared to other printers, and ensure better printing quality. Fully Open Source: Longer LK4 PRO is allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all. Fast Heating & Resume Print: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste. Built-in Safe Power Supply: This power supply is hidden designed, it is placed under the flatbed to ensure users' safety and increase printing stability. Due to new import restrictions this no longer includes a SD Card or USB Stick, all required software can be downloaded from the links below. Features: All the cool details Open source and support. The latest open source Marlin firmware, expand more functions independently, e.g. automatic bed levelling. With open-source firmware, you can try your fantastic ideas on LK4Pro by changing the C code. Ultra-quiet drive. Plug and Play TMC2208 driver with higher subdivision, higher running accuracy, and ultra-quiet. 4.3-inch touch screen and new UI design engender ease of use and intuitive response that is unparalleled. Support filament run-out sensor and power outage protection. LK4 Pro can resume printing even after a power outage occurs, and also can pause the printing automatically when the filament runs out. A High-power hotbed provides efficient heating and uniform temperature. The Glass build platform has better flatness, and the PC sticker ensures a decent print bed adhesion and the model does not warp. Upgraded structure design. Longer LK4 Pro uses a new aluminium extension profile to enhance structural rigidity and stability. The built-in design of power supply provides more safety. The tempered glass bed ensures fast heating and strong adhesion. Specifications: The technical stuff MODEL LK4 PRO Printing Technology FDM Printed Size 220*220*250mm  (8.7"*8.7"*9.8") Extruder Single Nozzle Diameter 0.4mm Printing Temperature 190-250℃ Filament Detector Yes Resume Printing Yes Printing Speed ≦180mm/s (Suggest 60-80mm/s) Layer  0.1-0.4mm Slice Software Cura, Reptier-Host File Format  G-code, stl Connection TF Card or USB Cable Net Weight 7.8KGS Gross Weight 8.5KGS Printer Dimension 425*402*505mm Package Dimension 467*412*187mm Printing Material 1.75mm PLA/ABS/Wood Additional Images and Videos: More images of this item. Links and Resources: Manual, links and resources to help you get more from this item. Longer3D LK4 Product Page Longer3D LK4 Download Page ⠀ Longer3D LK4 Product Manual Longer3D LK4 LONGER SLICER DOWNLOAD (WINDOWS) Longer3D LK4 CURA (Windows) Longer3D LK4 CURA (Mac) ⠀ Visit our Example and Test Models page

Sold out
Anet® ET4 3D Printer Kit 220*220*250mm Print Size with 2.8-inch Full-color Touch Screen Support Filament Detection/Resume Print/Auto-leveling Anet® ET4 3D Printer Kit 220*220*250mm Print Size with 2.8-inch Full-color Touch Screen Support Filament Detection/Resume Print/Auto-leveling
Does not apply
Ships from: UK Warehouse
Anet® ET4 3D Printer Kit 220*220*250mm Print Size with 2.8-inch Full-color Touch Screen Support Filament Detection/Resume Print/Auto-leveling £182.99

Description: The Anet ET4 offers a low cost well specced 3D printer, featuring an all metal frame, 2.8 inch touch, print resume function, offline or inline printing and integrated auto bed levelling. it's an ideal printer for those looking to get started in 3D printing or looking for a lower cost secondary printer for smaller prints. Due to new import restrictions this no longer includes a SD Card or USB Stick, all required software can be downloaded from the links below. Features: All the cool details Auto-leveling frees your time and labor. Support resume printing and recover from exactly where it left off. Filament detection that detects the filament end and sent a reminder to avoid air-printing. (reminds shown on the LCD screen) Automatic load and unload the filament with just a click. 2.8-inch full-color touch screen for easy operation. Support online or offline printing. Industrial grade chipset that allows more accurate, fast print. Precision rollers on X and Y axis which reduce printing noise and provides ultra-high print resolution. Can manually set up fan speed, print speed, heated bed, and nozzle temperature. Quick heating bed in less than 5 minutes. Protected with safety features like over current protection, overload protection, over-temperature protection, pre-over-temp alarm. (turn off the heating switch automatically) (LCD screen doesn't work when detected with no light and no voice) Modular design with quick assembly in 10min. Offline upgrade: Copy the upgrade file into the memory card and plug it into the 3D printer to complete the program upgrade Specifications: The technical stuff Model ET4 Printing Technology FDM Color Black+Red Structure All Metal Frame Extruder quantity 1 Printing size 220*220*250 mm Printing resolution ±0.1 mm Layer Thickness 0.1-0.3 mm Connection mode Online/Offline Printing LCD LCD 2.8 inch Color Touch Screen Movement Speed150 mm mm/s (recommended speed 30-60 mm/s) Printing Speed ≤150 mm/s (recommended speed 30-60 mm/s) Standard Nozzle Diameter 0.4 mm Extruder Working Temp(Max) 250℃ Hotbed Temp(Max) 100℃ Hotbed Material Aluminum Hotbed and Tempered Glass XY Axis Position Precision 0.012 mm Z Axis Position Precision 0.004 mm Printable Filament PLA, ABS, HIPS etc. Recommended Filament PLA Filament Diameter 1.75 mm Control Software Language English/Chinese Data Input Format STL, OBJ, JPG Data Output Format Gcode Module Support Automatically Support Machine Size 440*340*480 mm Machine Net Weight 7.2±0.2Kg Packing Size 510*485*250 mm Package Weight 9.6±0.2KG   Power Supply/Maximum Power US:110 AC 240W / EU:220V AC 240W Plug EU Standard(Default) Operating System Windows Printing Software Cura, Repetier, Simplify3D Working Condition Temp: 10-40℃, Humidity: 5-80% Additional Images and Videos: More images of this item. Links and Resources: Manual, links and resources to help you get more from this item. Anet ET4 Product Page Anet ET4 Support Page ⠀ Anet ET4 Product Manual Anet ET4 SD Card/USB Stick Contents ⠀ Visit our Example and Test Models page

Sold out
Anet® A8 Plus DIY 3D Printer Kit 300*300*350mm Printing Size With Magnetic Movable Screen/Dual Z-axis Support Belt Adjustment Anet® A8 Plus DIY 3D Printer Kit 300*300*350mm Printing Size With Magnetic Movable Screen/Dual Z-axis Support Belt Adjustment
Does not apply
Ships from: UK Warehouse
Anet® A8 Plus DIY 3D Printer Kit 300*300*350mm Printing Size With Magnetic Movable Screen/Dual Z-axis Support Belt Adjustment £154.99

Description: The Anet A8 Plus builds on their popular A8 platform, bringing larger print sizes (300x300x350mm), upgraded motherboard, glass heated bed, uprated framework with belt adjustments and improved Extruder and Filament feed designs. The screen of the A8 Plus is moveable allowing you to place the printer in a convenient space yet still access the controls. Due to new import restrictions this no longer includes a SD Card or USB Stick, all required software can be downloaded from the links below. Features: All the cool details This is the DIY version of 3D Printer. Upgraded from Anet A8 printer. Larger printing size: 300*300*350 mm volume build size for more print scenes Support automatic filament feeding and unloading function, easy to solve by feeding and reloading With magnetic movable screen, breakthrough ergonomic design screen, allows for easier and more convenient operation. The latest upgraded motherboard: Added designs of over-current protection and short-circuit protection, with smaller current configuration, and it is safe and reliable. Optimization of hot bed: aluminium substrate hot bed + glass panel, printing is flat and not warped, easy to take out Upgraded the belt adjustment function: X-axis and Y-axis belt tightness can be adjusted freely and easier, effectively preventing the belt from loosening and jumping Patented extruder design: smooth discharge without plugging, short-range feeding, improve the effect of printing soft consumables More stable aluminum frame: Y-axis double-axis, Z-axis double-threaded rod, good transmission precision and high printing accuracy Specifications: The technical stuff Model A8 Plus Frame Material Aluminum Nozzle quantity 1 Building Volume 300*300*350 mm Printing Precision ±0.1 mm Layer Thickness 0.1-0.4 mm Connector Type TF Card, Online Printing Display Scree 12864 Display Screens Moving speed 10~300 mm/s Print speed 120 mm/s MAX, Recommended 30~60 mm/s Nozzle diameter 0.4 mm Marking Extruder Temperature 260℃ MAX Hot Bed Temperature 100℃ MAX Platform board Material Aluminum Plate and Tempered Glass XY-axis Positioning Accuracy 0.012 mm Z-axis Positioning Accuracy 0.004 mm Supporting Material PLA, ABS, HIPS, WOOD, TPU etc. Material Diameter 1.75 mm Recommended materials PLA Language English and Chinese File Input Format STL/OBJ/JPG File output Format Gco/Gcode Model Automatic Support  Function support Operating System MAC or Windows Slicing Software Cura Power Supply AC 220V/110V  360W Power Plug Plug EU Standard(Default) Product Size 612*462*573mm Package Size DIY version: 500*370*175MM Product Weigh 10KG Package Weight 12KG Package Includes Anet A8 Plus Printer, 10m PLA Filament Additional Images and Videos: More images of this item. Links and Resources: Manual, links and resources to help you get more from this item. Anet A8 Plus Product Page Anet A8 Plus Support Page ⠀ Anet A8 Plus Product Manual Anet A8 Plus SD Card/USB Stick Contents ⠀ Visit our Example and Test Models page

S8 FDM 3D Printer 310x310x400mm Print Size - NSE Imports S8 FDM 3D Printer 310x310x400mm Print Size - NSE Imports
SUNLU
Ships from: UK Warehouse
SUNLU S8 FDM 3D Printer 310x310x400mm Print Size £329.99

Description: Sunlu 3D printers are new to the market but offer all the features you would expect from a modern 3D printer. With a fast warming bed and both SD only (offline) or USB connectivity options you can print in which ever method suits you. The system is based on the popular Marlin firmware allowing for updates and customisation by owners. Accepts a wide range of 1.75mm filament, such as PLA , PLA+, ABS , PETG , HIPS, WOOD etc....30 Minutes Assembly: The printer comes with two assembled parts, you just need half an hour to install 3D printer parts and debug data. Watch the short video for a quick run-through. Due to new import restrictions this no longer includes a SD Card or USB Stick, all required software can be downloaded from the links below. Features: All the cool details 30 Minutes Assembly SUNLU S8 3D DIY Printer: Using video and 3D printer tools, it comes with two assembled parts, you just need half an hour to install 3D printer parts and debug data. Filament Detection: Auto pause if filament runs out or breaks Power Loss Resume: One click to continue with the last printing from power off. SUNLU Intelligent 3D Printer has the ability to resume printing even after a power outage or lapse occurs. Large Build Volume: 310x310 x400mm SUNLU DIY Printer enables 3D Beginner to print large-size 3D models as well. Detailed assembly and user manual, easy to calibrate and print. Free 0.5kg PLA+ Filament】Extra 0.5kg 1.75mm 3D printer filament (PLA+ filament) is added. You can enjoy printing at once Specifications: The technical stuff CE Certification: Yes Brand Name: SUNLU Modeling Technology: FDM Printing Size: 310*310*400mm Overall Size: 600*490*610mm Print Accuracy: ±0.01mm Nozzle Diameter: Equipped with 0.4mm & 0.3mm & 0.2mm (Optional) Max Traveling Speed: 20-100mm/s (Recommend 50mm/s) Recommended Filament: 1.75mm PLA ,ABS, PETG, HIPS, WOOD, PLA-CF etc. Input: AC 115/230V 50/60Hz AC Output: DC 24V 15A 360W File Format input: STL,OBJ,AMF File Format output: gcode Connecting: TF Card & USB cord Package weight: 12kg Additional Images and Videos: More images of this item. Links and Resources: Manual, links and resources to help you get more from this item. SunLu Support Forum: Firmware updates, manuals etc... ⠀ Visit our Example and Test Models page

Sapphire Pro CoreXY DIY 3D Printer Kit 235*235*235mm Print Size - NSE Imports Sapphire Pro CoreXY DIY 3D Printer Kit 235*235*235mm Print Size - NSE Imports
TWO TREES
Ships from: UK Warehouse
TWO TREES Sapphire Pro CoreXY DIY 3D Printer Kit 235*235*235mm Print Size from £242.99

Description: The Two Trees Sapphire Pro is an upgraded version of their older Sapphire S printer. It is similar to a Creality 3D Ender 3 in terms of print size and specs, the Sapphire Pro has a cube shape and utilises a CoreXY belt setup. It’s fast, accurate, and reliable, sporting a range of high-tech features. The Sapphire Pro is aimed at both hobbyists and beginners on a midrange budget. Among it many features the key points are the linear rails on the X and Y axes, as well the dual gear BMG Bowden extruder and filament monitor for increased reliability. Due to new import restrictions this no longer includes a SD Card or USB Stick, all required software can be downloaded from the links below. Features: All the cool details Standard Build Volume: 220*220*220mm, Max Build 235*235*235mm; up to 300mm/s print speed. High accuracy printing quality, ±0.01mm. Dual Extruder fans to help regulate the temperature. Acrylic Shell housing option to protect the printer and your work. Runs on Two Trees custom board software for maximum performance. CoreXY belt system for stability. Support power loss detection and recovery. Support filament runout detection and recovery. With touch screen control, heated bed and dual gear extruder. Suitable filament recommendation: ABS,PLA,PETG,Wood filament 1.75mm 1kg Spool Specifications: The technical stuff Additional Images and Videos: More images of this item. Links and Resources: Manual, links and resources to help you get more from this item.   Two Trees Support Page: Firmware updates, manuals etc... ⠀ Visit our Example and Test Models page

5

Free Tracked Shipping to most countries*

*Some country/warehouse combinations may have fees due to high shipping costs.

Secure Payments

We accept most Cards, PayPal, Amazon Pay, Google Pay and Apple Pay