Ships from: China
DFPlayer Mini MP3 Player Module: Compact and Inexpensive Audio Solution for Arduino and Similar Projects
from £4.95
These DFPlayer Mini modules are a compact and inexpensive MP3 player that can be directly connected to a speaker. It features integrated hardware to decode MP3, WAV, and WMA files. The software supports MicroSD/TF cards in either FAT16 or FAT32 formats. Using simple serial commands, the player can play back audio without the need for complex audio decoding and management from the host platform.
Technical Specifications:
Supports sampling rates (Khz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
24-bit DAC output, support range: 90dB, SNR support: 85dB
Fully supports FAT16, FAT32 file system, maximum support 32G TF card, support U disk to 32G, 64M bytes NOR FLASH
A variety of control modes are available. IO control, serial port, AD button control mode
Radio spots language function, you can pause the background music being played. Advertising finished playing background sound continues to play back
The audio data is sorted by folder, supports up to 100 folders, folders can be assigned to every 255 Tracks
30 level adjustable volume, six adjustable EQ
Due to different batches, these may arrive with either Black or Red PCB's.
Application:
Automated Assistants
Arduino Powered Robots
Cosplay Props and Costumes (Proton Packs, Phasers, Daleks, Cybermen etc...)
Car navigation voice broadcast
Road transport inspectors, toll stations voice prompts
Train, bus safety inspection voice prompts
Electricity, communications, financial operating room voice prompts
Vehicles into and out of the channel to verify the voice prompts
Frontier channel voice prompts
Multi-channel voice alarm or voice guidance equipment operation
Electric sightseeing bus safety with voice announcement
Electrical and mechanical equipment failure alarm
Fire alarm voice prompts
Automatic broadcast equipment, regular broadcast
Pinout:
Pin number
Pin name
Function
Remark
1
VCC
Module power input
3. 3V—5V, 5V is recommended, do not exceed 5. 2V
2
RX
UART serial data input
3
TX
UART serial data output
4
DAC_R
Audio output right channel
Drive headphones, amplifier
5
DAC_L
Audio output left channel
Drive headphones, amplifier
6
SPK2
Connect small speaker
Drive less than 3W speakers
7
GND
Ground
Power ground
8
SPK1
Connect small speaker
Drive less than 3W speakers
9
IO1
Trigger port
Default previous song (long press volume down)
10
GND
Ground
Power ground
11
IO2
Trigger port
Default next song (long press volume plus)
12
ADKEY1
AD port 1
The first song when triggered (long press cycle first song)
13
ADKEY2
AD port 2
Fifth track when triggered (long press cycle fifth track)
14
USB+
USB+ DP
Connect U disk or USB port of computer
15
USB-
USB- DM
Connect U disk or USB port of computer
16
Busy
Playback status
With audio, output low. No audio, output high