Products

EMMC ISP Module for XGecu T48: Perform In Circuit Serial Programming, Reading and Testing from NSE Imports #1.

EMMC ISP Module for XGecu T48: Perform In Circuit Serial Programming, Reading and Testing from NSE Imports #2.

Ships from: China EMMC ISP Module for XGecu T48: Perform In Circuit Serial Programming, Reading and Testing £14.95

Add extra functionality to your XGecu T48 programmer with this ISP Module. The XGecu EMMC-ISP VER: 1.00 Special Adapter allows for in-circuit programming of EMMC chips with your T48 (TL866-3G) programmer. With its secure encryption chip and anti-interference circuit on the PCB board this is designed to get the job done. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: Provides ISP Functionality to suit most EMMC chips Provides Pins for VCC, VCCQ(VCQ), GND x2, CLK, CMD, D0 to D3 Supplied with breakout cable Item includes: 1x EMMC_ISP Board, 1x 10 pin Breakout cable

Add to cart

XGECU EMMC BGA Adapter for T48 Programmer Supports BGA153 BGA169 BGA162 BGA221 BGA100 High Speed 5 in 1 Kit from NSE Imports #1.

XGECU EMMC BGA Adapter for T48 Programmer Supports BGA153 BGA169 BGA162 BGA221 BGA100 High Speed 5 in 1 Kit from NSE Imports #2.

Ships from: China XGECU EMMC BGA Adapter for T48 Programmer Supports BGA153 BGA169 BGA162 BGA221 BGA100 High Speed 5 in 1 Kit from £29.95

The newly enhanced XGECU EMMC BGA flash adapters for the XGecu T48 programmer expand its capabilities to read and program an extensive array of EMMC BGA packages using your T48 (also known as TL866-3G) programmer. The robust clamshell ZIF socket, equipped with precision pins, is perfectly suited for recovery and programming tasks on packages, regardless of the presence of solder balls. With support for a broad spectrum of BGA packages measuring 12x16mm and 14x18mm, these adapters enable you to manage most common chips in your inventory. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with BGA153, BGA169, BGA162, BGA221 and BGA100 IC packages High quality sprung pins ensure a firm connection Supports 11.5x13mm, 12x16mm and 14x18mm eMMC BGA packages Supports Samsung KMAFG000A-S998, Hynix H9TQ17ABJTMCUR and similar For T48 Programmer only ZIF socket rated for 50,000 actuations Item includes: 1x Adaptor of choice OR All four adapters

Add to cart

-11% sale

XGECU EMMC SD Adapter for T48 programmer Read and Write SD / TF and 8*6mm EMMC chip from NSE Imports #1.

XGECU EMMC SD Adapter for T48 programmer Read and Write SD / TF and 8*6mm EMMC chip from NSE Imports #2.

Ships from: China XGECU EMMC SD Adapter for T48 programmer Read and Write SD / TF and 8*6mm EMMC chip £17.95 £19.95

The XGECU SD and EMMC 8*6mm flash adapter module for the XGecu T48 programmer adds the ability to read and program SD Cards and EMMC chips with the T48 (aka TL866-3G) programmer. Able to accept full size SD, Micro SD, Transflash and EMMC, it's ideal for recovery and/or programming operations. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with SD, MultiMediaCard / MMC, Mini SD (using a Mini to full size adapter), Micro SD, Transflash / TF and 8*6mm EMMC modules For T48 Programmer only Item includes: 1x EMMC SD Adapter

XGecu T48 ADP-BGA63-E001 v2: For NAND Flash BGA63 9x11/10.5x13mm & BGA48 6x8/6.15x8.15/6.5x8 Chips from NSE Imports #1.

XGecu T48 ADP-BGA63-E001 v2: For NAND Flash BGA63 9x11/10.5x13mm & BGA48 6x8/6.15x8.15/6.5x8 Chips from NSE Imports #2.

Ships from: China XGecu T48 ADP-BGA63-E001 v2: For NAND Flash BGA63 9x11/10.5x13mm & BGA48 6x8/6.15x8.15/6.5x8 Chips £40.95

The XGECU ADP-BGA63-E001 v2 BGA63 flash adapter module for the XGecu T48 programmer adds the ability to read and program BGA48 and BGA63 packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable clamshell ZIF socket is ideal for recovery and/or programming operations on packages with or without solder balls. The updated design now support even more BGA by bringing BGA48 chip support in addition to BGA63 packages, you'll be able to handle most of the common chips in your inventory. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: Supports BGA48 package chips.Applicable IC Size: 6*8MM, 6.15*8.15MM, 6.5*8MMPitch: 0.8MM Supports BGA63 package chips.Applicable IC Size: 9*11MM, 10.5*13MMPitch: 0.8MM Supports NOR, NAND and eMMC BGA packages For T48 Programmer only ZIF socket rated for 50,000 actuations Item includes: 1x ADP-BGA63-E001 v2, 4* BGA Frames, Expansion cable

XGecu T48 ADP_F48_EX-1 TSOP48 TSOP40 Adapter for Nor Flash Only for T48 (TL866-3G) Programmer F48-NOR-T48 from NSE Imports #1.

XGecu T48 ADP_F48_EX-1 TSOP48 TSOP40 Adapter for Nor Flash Only for T48 (TL866-3G) Programmer F48-NOR-T48 from NSE Imports #2.

Ships from: China XGecu T48 ADP_F48_EX-1 TSOP48 TSOP40 Adapter for Nor Flash Only for T48 (TL866-3G) Programmer F48-NOR-T48 £14.95

This TSOP40/TSOP48 NOR flash adapter module for the XGecu T48 programmer adds enhanced functionality. The ADP_F48_EX-1 Adapter permits precise reading and programming of TSOP packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIF socket is ideal for recovery and/or programming operations. This adapter replaces the older SN001 series of boards which do not work on the T48 as XGECU has removed support for them, ideal if you are trying to program AM29LV800BB or similar chips. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with TSOP48 TSOP40 IC packages For T48 Programmer only Ideal for AM29LV800BB, M29W320DB and similar IC's Replaces TL866II SN001 and TSOP socket adapters ZIF socket rated for 10,000 actuations Item includes: 1x ADP_F48_EX-1, 1x ISP cable

XGecu T48 BGA48 Module ADP_BGA48_E001, Read, Program and Test 0.8mm BGA48 NAND and NOR packages TL866-3G from NSE Imports #1.

XGecu T48 BGA48 Module ADP_BGA48_E001, Read, Program and Test 0.8mm BGA48 NAND and NOR packages TL866-3G from NSE Imports #2.

Ships from: China XGecu T48 BGA48 Module ADP_BGA48_E001, Read, Program and Test 0.8mm BGA48 NAND and NOR packages TL866-3G £56.95

Add extra functionality to your XGecu T48 programmer with this BGA NAND and NOR Module. The ADP_BGA48_E001 Adapter allows for reading and programming a wider range of more exotic chips in 0.8mm BGA packages with your T48 (TL866-3G) programmer. The heavy duty ZIP socket features precision pins that can work on any BGA48 module with or without solder balls, this makes it great for recovery work as well as programming fresh stock. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with NOR and NAND flash devices 0.8 mm BGA48 packages Supports BGA48 chip sizes: 6*8 mm, 6.15*8.15 mm, 6.5*8 mm Row spacing 600mil Item includes: 1x ADP_BGA48_E001, 1x ISP cable, 1x 6*8 Plate, 1x 6.15*8.15 Plate, 1x 6.5*8 Plate

Add to cart

XGecu T48 BGA64 Module ADP_BGA64_EX-A, Read, Program and Test 29xxx 28Fxxx series TL866-3G from NSE Imports #1.

XGecu T48 BGA64 Module ADP_BGA64_EX-A, Read, Program and Test 29xxx 28Fxxx series TL866-3G from NSE Imports #2.

Ships from: China XGecu T48 BGA64 Module ADP_BGA64_EX-A, Read, Program and Test 29xxx 28Fxxx series TL866-3G £74.95

This BGA NAND and NOR Module for the XGecu T48 programmer adds enhanced functionality. The ADP_BGA64_EX-A Adapter permits precise reading and programming of 0.8mm BGA packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIP socket is ideal for recovery and/or programming operations with or without solder balls. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. <Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with NOR/NAND/eMMC flash devices BGA64 packages Supports BGA64 chip sizes: 11*13mm, 12*18mm, 10*13mm Supplied with 3 PCB to support different BGA64 Series ADP_BGA64_EX-A: For 29xxx series ADP_BGA64_EX-B: For 28F320/640/128/256 series ADP_BGA64_EX-C: For 28F128/256/512/00A-P series Row spacing 600mil Item includes: 1x ADP_BGA64-Header, 1x ISP cable, 1x 11*13 Plate, 1x 12*18 Plate, 1x 10*13 Plate, 3x ADP_BGA64-EX PCB's

Add to cart

-11% sale

XGecu T48 DIP42/PLCC44 Module ADP_D42_EX-A, Read, Program and Test DIP42 and PLCC44 Chips such as 27C800 MX2171610 TL866-3G from NSE Imports #1.

XGecu T48 DIP42/PLCC44 Module ADP_D42_EX-A, Read, Program and Test DIP42 and PLCC44 Chips such as 27C800 MX2171610 TL866-3G from NSE Imports #2.

Ships from: China XGecu T48 DIP42/PLCC44 Module ADP_D42_EX-A, Read, Program and Test DIP42 and PLCC44 Chips such as 27C800 MX2171610 TL866-3G £8.95 £9.95

Add extra functionality to your XGecu T48 programmer with this DIP42/PLCC44 Module. The XGecu ADP_D42_EX-A Adapter allows for reading and programming a wider range of more exotic chips in DIP42 or PLCC44 packages with your T48 (TL866-3G) programmer Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: Suitable for use with DIP42 PLCC44 package chips, such as: 27C800 27C160 27C322 27V800 27V160 27V322 MX27C8100 MX27C1610 Item includes: 1x ADP_D42_EX-A, 1x ISP cable

Add to cart

XGecu T48 Programmer V12.15 Support 31000+ ICs for Eprom,MCU,SPI,Nor,Nand Flash,Emmc/IC Tester TL866-3G from NSE Imports #1.

XGecu T48 Programmer V12.15 Support 31000+ ICs for Eprom,MCU,SPI,Nor,Nand Flash,Emmc/IC Tester TL866-3G from NSE Imports #2.

Ships from: China XGecu T48 Programmer V12.15 Support 31000+ ICs for Eprom,MCU,SPI,Nor,Nand Flash,Emmc/IC Tester TL866-3G from £47.95

Supporting 31000+ types of ROM, EPROM, EEPROM, NAND, GAL, SRAM, EMMC, AVR, MCU, The TL48 (TL866-3G) takes over as XGecu's entry programmer from the venerable TL866 series. Closer in specification to their bigger sibling the T56, these feature rich programmers will help you ensure you can get the job done. With a high-quality 40-pin industrial ZIF Socket, improves all features of the older TL866II Plus programmers. Using a 120Mhz 32-bit MCU and 4-layer PCB design, this professional T48 programmer supports high-capacity NAND EMMC up to 256GB, with faster programming speeds than the TL866II. With high-voltage chips support upto a VPP Maximum of 25V, you can program a wider variert of chips, a lot of older or vintage EPROMS require these far higher voltages. Please visit our T48 Downloads Page for the latest software, manuals and chip support list. Need additional adapters? Browse our T48 range to find suitable adapters. After purchase we will send links to download the software and manuals. Need additional adapters? Browse our T48 range to find suitable adapters. Please get in touch if you need a chip support list. Features: Everything you loved about the TL866II series and more... 120Mhz 32-bit MCU with 4-layer PCB Design, USB2.0 480Mhz Connection 16 channel ISP 56-channel dedicated IO with high-speed high-voltage isolation Replaceable high quality 40pin ZIF socket, extends the life of heavily used programmers VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable. Power consumption: 5V <500MA. Static power consumption: 60mA. Without external power supply interface. Self-test function, self-test each pin of VPP/VCC/GND/IO Program, Read, Write, Test and more. Supports over 31000+ types of ROM, EPROM, EEPROM, NAND, GAL, SRAM, EMMC, AVR, MCU etc.... Kits contain different adapters to cover a wide range of chip styles. See the images for which adapters are included with each kit version. Can attach upto 4 programmers to on PC for small batch runs. Support WIN2000, WINXP, WIN2003, WIN2008, WIN VISTA, WIN7, WIN8, WIN10(32&64 bit) Additional Information: Click to view Additional Information × Specifications: 120Mhz 32-bit MCU with 4-layer PCB Design, USB2.0 480Mhz Connection Volume: 10cm x 6cm x 2.8cm 40-pin drive IO design. Non-full drive, IO voltage is not adjustable. VCC voltage 1.8-6.5V 32 levels adjustable,VPP voltage 9V-18V 32 levels adjustable.VCC 120MA over current protection, VPP 100MA over current protection. VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable. Power consumption: 5V <500MA. Static power consumption: 60mA. Without external power supply interface. Self-test function, self-test each pin of VPP/VCC/GND/IO Suitable for developers and maintenance personnel, can do small batch production for small capacity chips, support simultaneously working with 4 Programmers on each computer 30000+ supported devices from hundreds of manufacturers by 7.05 version of SW (Mar. 1th, 2018). NAND FLASH: Samsung K9xxx, SK Hynix (ex Hynix) HY27xxx, H27xxx, Micron MT29Fxxx, NANDxxx, Spansion S34xxx, NAND Toshiba TH58NVGxxx. Serial NAND FLASH: Micron MT29Fxxx. Serial Flash: standard SPI, high performance Dual I/O SPI and Quad I/O SPI (25Bxxx, 25Dxxx, 25Fxxx, 25Lxxx, 25Pxxx, 25Qxxx, 25Sxxx, 25Txxx, 25Uxxx, 25Vxxx, 25Wxxx, 25Xxxx, 26Vxxx, 45PExx, MX26Lxxx ).DataFlash (AT45Dxxx, AT26Dxxx) Parallel NOR Flash: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, Samsung'sK8Pxxxx, K8Dxxxx series, ... EPROM: NMOS/CMOS, 27xxx and 27Cxxx series EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, Serial E(E)PROM: 24XXX,25XXX series, Microcontrollers MCS51 series:89Cxxx, 89Sxxx, 89EXXX,89VXX Microcontrollers Atmel AVR 8bit/16bit: AT90Sxxxx, ATtiny, ATmega series Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, PIC24xxx series GAL Programmable logic device programming and SRAM test I.C. Tester: TTL type: 54,74 S/LS/ALS/H/HC/HCT series; CMOS type: 4000, 4500 series; Static RAM: 6116 ..

Add to cart

XGecu T48 SOP44 Module ADP_S44_EX-1 Module, Read, Program and Test 1.27mm PSOP44/SOP44/SOIC44 packages TL866-3G from NSE Imports #1.

XGecu T48 SOP44 Module ADP_S44_EX-1 Module, Read, Program and Test 1.27mm PSOP44/SOP44/SOIC44 packages TL866-3G from NSE Imports #2.

Ships from: China XGecu T48 SOP44 Module ADP_S44_EX-1 Module, Read, Program and Test 1.27mm PSOP44/SOP44/SOIC44 packages TL866-3G £17.95

Add extra functionality to your XGecu T48 programmer with this SOP44 Module. The ADP_S44_EX-1 Adapter allows for reading and programming a wider range of more exotic chips in 1.27mm SOP44 packages with your T48 (TL866-3G) programmer. The heavy duty ZIP socket features precision contacts and is rated for over 10,000 actuations. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with 1.27mm PSOP44/SOP44/SOIC44 Ideal for programming AM29F200BB and similar IC's Supports PSOP/SOP/SOIC devices up to 44 pins (for example EPROMs) High quality SOP44 ZIF socket Row spacing 600mil Item includes: 1x ADP_S44_EX-1, 1x ISP cable.

Add to cart

-12% sale

XGecu T48 TSOP48 NAND Module ADP_F48_EX-2, Read, Program and Test TSOP48 NAND packages TL866-3G from NSE Imports #1.

XGecu T48 TSOP48 NAND Module ADP_F48_EX-2, Read, Program and Test TSOP48 NAND packages TL866-3G from NSE Imports #2.

Ships from: China XGecu T48 TSOP48 NAND Module ADP_F48_EX-2, Read, Program and Test TSOP48 NAND packages TL866-3G £14.95 £16.95

Add extra functionality to your XGecu T48 programmer with this TSOP48 NAND Module. The ADP_F48_EX-2 Adapter allows for reading and programming a wider range of more exotic chips in TSOP48 packages with your T48 (TL866-3G) programmer. The heavy duty ZIP socket features precision contacts and is rated for over 10,000 actuations. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with TSOP48 packages Support NAND capacity up to 256G, speed up to 6MB/S High quality ZIF socket rated for over 10000 insertions Item includes: 1x ADP_F48_EX-2

Add to cart

XGECU TSOP56 3-IN-1 Adapter Kit for T48 Progammer ADP_F56_EX-A ADP_F56_EX-B ADP_F56_EX-C for Flash EPROM NAND EMMC from NSE Imports #1.

XGECU TSOP56 3-IN-1 Adapter Kit for T48 Progammer ADP_F56_EX-A ADP_F56_EX-B ADP_F56_EX-C for Flash EPROM NAND EMMC from NSE Imports #2.

Ships from: China XGECU TSOP56 3-IN-1 Adapter Kit for T48 Progammer ADP_F56_EX-A ADP_F56_EX-B ADP_F56_EX-C for Flash EPROM NAND EMMC £53.95

This TSOP56 3-IN-1 adapter module for the XGecu T48 programmer adds enhanced functionality. The three adapter plates enable reading and programming of various TSOP56 packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIF socket is ideal for recovery and/or programming operations. This adapter replaces the older SN001 series of boards which do not work on the T48 as XGECU has removed support for them. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with TSOP56 0.5mm NOR, NAND, EMMC, EPROM IC packages For T48 Programmer only Ideal for 29XXXTSOP56, 28F32/64/128/256, 28F128/256/512/00A-P, S29GL128NxxTAx02 and similar IC's Replaces TL866II SN001 and TSOP socket adapters ZIF socket rated for 10,000 actuations Plate ADP_F56_EX-A supports: 29xxx series chips Plate ADP_F56_EX-B supports: 28F32/64/128/256 series chips Plate ADP_F56_EX-C supports: 28F128/256/512/00A-P series chips Item includes: 1x TSOP56 Header PLate, 1x ISP cable, 1x ADP_F56_EX-A, 1x ADP_F56_EX-B, 1x ADP_F56_EX-C

XGECU TSOP56 ADP_F56_EX-A/B/C V2.0 Adapter for T48 Programmer: for Flash EPROM NAND EMMC ADP_F56_EX-B ADP_F56_EX-C from NSE Imports #1.

XGECU TSOP56 ADP_F56_EX-A/B/C V2.0 Adapter for T48 Programmer: for Flash EPROM NAND EMMC ADP_F56_EX-B ADP_F56_EX-C from NSE Imports #2.

Ships from: China XGECU TSOP56 ADP_F56_EX-A/B/C V2.0 Adapter for T48 Programmer: for Flash EPROM NAND EMMC ADP_F56_EX-B ADP_F56_EX-C from £20.95

These updated TSOP56 adapter modules for the XGecu T48 programmer offer enhanced functionality. The updated v2.0 design does away with the baseplate and socket design of the original, instead you can buy just the adapter you need, or purchase all three. The adapters enable reading and programming of various TSOP56 packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIF socket is ideal for recovery and/or programming operations. This adapter replaces the older SN001 series of boards which do not work on the T48 as XGECU has removed support for them. Please note: These adapters only can work on the XGecu T48 programmer, there are not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with TSOP56 0.5mm NOR, NAND, EMMC, EPROM IC packages For T48 Programmer only Ideal for 29XXXTSOP56, 28F32/64/128/256, 28F128/256/512/00A-P, S29GL128NxxTAx02 and similar IC's Replaces TL866II SN001 and TSOP socket adapters ZIF socket rated for 10,000 actuations Plate ADP_F56_EX-A supports: 29xxx series chips Plate ADP_F56_EX-B supports: 28F32/64/128/256 series chips Plate ADP_F56_EX-C supports: 28F128/256/512/00A-P series chips Item includes: 1x TSOP56 Header PLate, 1x ISP cable, 1x ADP_F56_EX-A, 1x ADP_F56_EX-B, 1x ADP_F56_EX-C

Add to cart

Find anything you need

Friendly Service

Free Tracked Delivery to most destinations

Low Prices

Latest and Greatest Tech