PLA Silk 3D Printer Filament (8)

SUNLU PETG and PLA Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Please make sure you double check colour and material when placing your order. Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Features Good toughness, high hardness Impact strength is 30 times more than PLA and the elongation at break of more than 50 time PLA. Compatible printers must have heating device, ideal for printing heat resistant and transparent models, such as: lampshades. PETG Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend print Temperature: 230-250°C Platform temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.3kg Length：1.75mm(1kg)=395m PLA Features: PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3d Printer, suitable for printing artworks and crafts. 100% no bubble 3d Printer filament. PLA Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend Print Temperature: 190-220°C Platform Temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length: 1.75mm(1kg)=330m PLA+ Features: PLA+ is a more durable form of traditional PLA, it can give strength similar to PETG or ABS but with the ease of PLA printing techniques. Ideal for applications where you need a more durable print but not necessarily the heat or acid resistant properties of PETG or ABS. PLA+ Specifications: Model: PLA PLUS (PLA+) Diameter Format: 1.75mm Print Temp.: 210-235°C Tolerance: ±0.02mm Print Speed： 50-100mm/s Platform Temp： Depends on the platform: No need or 60-80℃ Net Weight: 1kg Gross Weight: 1.3kg Packing Size: 209*209*73mm Length: 330m Tensile Strength: 11-15kgf Melt Flow Rate: 9-11g/10 min(190℃,2.16kg) Certificate: RoHS, Reach

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top

ERYONE Dual Colour PLA Filament is ideal for creating eye catching prints. With a range of colour choices, these print similar to Rainbow filaments but with just two mixed colours. Available in Regular, Matte and Silk options. The 4x mixed spool options contain the following: 4x 250g Matte Dual: Yellow/Purple, Blue/Purple, Green/Purple, Blue/Yellow 4x 250g Silk Dual (A): Blue/Green, Red/Green, Red/Blue, Purple/Gold 4x 250g Silk Dual (B): Gold/Bronze, Gold/Silver, Red/Gold, Yellow/Green Made from high quality virgin plastic, with strong colours and supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. This is a great filament for making props and cosplay items. No need to try and coat an item with glitter after printing, the glitter finish runs through your print as well, meaning the odd scuff won't leave bald patches. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa,Makerbot,etc. ERYONE filament had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]:  6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. These triple packs offer gret value for stocking up or larger print runs. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional images: Click to view Additional images ×

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top