Please note before ordering： 1.The new packaging has been changed to kraft paper box as shown in follows picture (without any SUNLU logo). 2.SUNLU is supplier of GeeeTech,A mistake of our packaging department meant they have had to cover the unavailable GeeeTech label with blank labels for shipment.Please don't worry about the quality, SUNLU produce the filament for GEEETECH using the same materials and technology except the packing. SUNLU ABS Filament 1.75mm For 3D Printer 100% No Bubble Excellent Quality Plastic ABS Filament For Children Scribble 1KG/2.2LBS Features: 1. Has excellent impact strength and wear resistance; 2. Chemical resistance, dyeing, molding processing And mechanical processing effect is better; 3. The support is easy to peel; Applicable to equipment with heating device on the bottom plate, printable Strong print strength requirements and need to add Hand-processed models, such as: dyeing, polishing, electroplating Etc., suitable for playing small parts. Parameter: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 230-270℃ Floor temperature: 80-120℃ Tension (KGF): 6-11 Melt index: 12-19g/10min (220℃, 10kg) Elongation at break: 25% Print speed: 50-100MM/s Bubbles: 100% zero bubbles Net weight: 1 KG/roll Gross weight: 1.3 KG/roll Length: 1.75MM(1KG)=395M 3.0MM(1KG)=130M SUNLU ABS PRINTE WORKS Our Certificate More About SUNLU ZHUHAI SUNLU INDUSTRIAL CO., LTD. Established in 2013; Located in Zhuhai city, Guangdong province, China; A professional directly manufacturer with independent R&D capacity; Main Products are 3D pen , 3D printer filament, 3D pen filament; Have Injection&Molding workshop& SMT workshop; Main Markets are North America, South America, West Europe and Asia; Our Corporate Philosophy is Sincerity, Concentration, Innovation and Practicality.
Keep your PLA, PETG, TPU or ABS filament clean, dry and ready for action with these great combination storage and drier boxes, Simply pop your spool of filament inside and the Fila Dryer S1 will keep it warm, this helps with achieving more consistent print results, especially on larger models where temperature changes can vary greatly during a print. The Fila Dryer S1 also has a timer function allowing you to set it to pre-heat your filament so it's at optimal temperature when you need it. The box has a pass through in the flap allowing your filament to leave without reducing the overall spool temperature. SUNLU Dry Box 3D print Filament Drying Filament dryer Box holder 3D Printer Filament Storage Box Keep Filaments Dry sublimation Features: Reduce filament water absorption characteristics, intelligent heating can dry the moisture in the filament. Dry filament helps ensure that your filament is back to 100% high-quality state during printing! Extend the shelf life of the filament by keeping it fresher for longer. Adjustable heating temperature: Temperature selection (range of 35℃~55℃) Wrap and bake, heating is more uniform, and the baking effect is better. Timing function: set heating time, set time, enter standby state, safe and secure LCD display: 2 inches LCD display, display temperature and time. Double temperature probes can measure the temperature of the cabinet and heating plate in real time to ensure the safety of the filament. Specifications: Name: S1 Filament Dryer Box Color: White Temperature range: 35-55℃ Plug: We will send an appropriate plug for your country. Suitable Filament Diameter: 1.75mm/2.85mm/3.00mm
Keep your filament dust and moisture free with these great temperature controlled Filament Storage boxes, suitable for most filament types including PLA, PETG, ABS, TPU and more. Simply pop your desired spool in, set up the recommended temperature on the display and when you need it, your spool will be ready for action. The box has a feed hole to allow your filament to be drawn off the spool without needing to open the lid. This is ideal for longer prints where a change in room temperature could make the difference between a successful or failed print. These units also have a small scale built in that allows them to display the remaining weight of filament left if the dispenser. 【eBox Filament Storage Box】Designed to keep filament dry and dehumidify various kind of filaments, especially those moisture sensitive filaments. Provide a dry storage environment for 3D printer filament. 【Keep Filament Dry】Designed to lay in your filaments and dehumidify to keep them dry. Made of high temperature resistant material, it can bake your filament at a designated temperature for hours. 【Measure Filament Weight】Freely set the drying heating time, temperature and empty disc weight for your needs. Monitor the temperature inside the box and remaining material weight timely. 【Comprehensive Dust-proof】Sealed protection, comprehensive dust-proof and no impurities. With Special tank for dryer bag and Anti-slip foot pad, which is convenient for recycling. 【Energy Saving】Equipped with LED screen, the light can be turned off automatically to save power. Great companion for any 3D FDM printers. Specifications: Power Adapter: AU/US/EU/UK for Option (Note: The power adaptors are multi voltage, if you have a travel adaptor you can use the EU in the UK etc..) Rated Power: AC100-240V~50/60Hz Power Output: DC12V~3A Power of Drying Heater: 36W Inside Environment Temperature: Max. 50℃ Heater Sheet Temperature: Max. 80℃ Weighing Power: 0.1W Weighing Load: ±2KG Weighing Accuracy: 0.02G Filament Diameter: 1.75mm/2.85mm/3mm Max Capacity: Φ200×73(H) mm Product Weight: 750g / 26.5oz Product Size: 23.9 * 21.5 * 10.4cm / 9.4 * 8.5 * 4.1in Package Weight: 1112g/39.2oz Package Size: 27.2 * 24.9 * 13.8cm / 10.7 * 9.8 * 5.4in Packing List: 1 * Filament Box 1 * Power Adapter 1 * Tube 1 * User Manual(English & Chinese)
Anet produce high quality filament suitable for a wide range of FDM printers, this ABS filament is great for projects requiring a more rigid, higher temperature resistant, machinable print, making it a great choice for engineers and others where mechanical uses are important. ABS is one of the most commonly used engineering plastics, it’s a recommended material for beginners by RepRap because of the loose temperature requirement during extrusion process. The plastic is great quality, and no kinks or breaks. Best choice for perfect printing. Provides excellent performance for 3D printers requiring 1.75mm filament, including the RepRap family of printers. It is compatible with different brands of 3D printers (such as: Makerbot, Mendel, reprap, UP, Prusa, Huxley, BFB3000, uPrint, Cubify, printrbot, Sumpod) Features: Non-toxic Recyclable Smooth surface finish Resistant to corrosion and abrasion Specifications: Print temperature range: 180°C - 230°C Filament diameter: 1.75 ± 0.1mm Color: black, blue, gold, green, grey, orange, pink, purple, red, transparent, white Net weight: 1KG Package includes: 1 x 1.75mm ABS Filament
CCTree produce high quality filament suitable for a wide range of FDM printers, this ABS filament is great for projects requiring a more rigid, higher temperature resistant, machinable print, making it a great choice for engineers and others where mechanical uses are important. Features: ● 1 KG/roll for the ABS filament, different color for choose - orange/black/red/grey/yellow/sky blue/green/purple/pink/blue/white ● Compatible with different brands of 3D printers (such as: Makerbot, Mendel, reprap, UP, Prusa, Huxley, BFB3000, uPrint, Cubify, printrbot, Sumpod) ● ABS material is more wear resistant, high strength, high toughness and stable performance. ● Please pay attention to moisture and print in a well ventilated environment Package Included: 1 x ABS filament(Please choose the color you want)