T48 Series Programmers and Adapters (30)

The XGECU EMMC BGA flash adapter module for the XGecu T48 programmer adds the ability to read and program a wide variety of BGA packages with the T48 (aka TL866-3G) programmer. The durable clamshell ZIF socket with precision pins is ideal for recovery and/or programming operations on packages with or without solder balls. Supporting both 12x16mm and 14x18mm size BGA packages, you'll be able to handle most of the common chips in your inventory. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with BGA153, BGA169, BGA162, BGA221 and BGA100 IC packages Supports 11.5x13mm, 12x16mm and 14x18mm eMMC BGA packages Supports Samsung KMAFG000A-S998, Hynix H9TQ17ABJTMCUR and similar For T48 Programmer only ZIF socket rated for 50,000 actuations Item includes: 1x BGA socket Board, 1x BGA153/169 Board, 1x BGA 221 Board, 1x BGA162 Board, 1x BGA100 Board, 1x 12x16mm BGA Frame, 1x 14x18mm Frame

This BGA NAND and NOR Module for the XGecu T48 programmer adds enhanced functionality. The ADP_BGA64_EX-A Adapter permits precise reading and programming of 0.8mm BGA packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIP socket is ideal for recovery and/or programming operations with or without solder balls. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. <Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with NOR/NAND/eMMC flash devices BGA64 packages Supports BGA64 chip sizes: 11*13mm, 12*18mm, 10*13mm Supplied with 3 PCB to support different BGA64 Series ADP_BGA64_EX-A: For 29xxx series ADP_BGA64_EX-B: For 28F320/640/128/256 series ADP_BGA64_EX-C: For 28F128/256/512/00A-P series Row spacing 600mil Item includes: 1x  ADP_BGA64-Header, 1x ISP cable, 1x 11*13 Plate, 1x 12*18 Plate, 1x 10*13 Plate, 3x ADP_BGA64-EX PCB's

The XGECU ADP-BGA63-E001 BGA63 flash adapter module for the XGecu T48 programmer adds the ability to read and program BGA63 packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable clamshell ZIF socket is ideal for recovery and/or programming operations on packages with or without solder balls. Supporting both 10.5x13mm and 9x11mm size BGA63 packages, you'll be able to handle most of the common chips in your inventory. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with 10.5x13mm and 9x11mm size BGA63 IC packages Supports NOR, NAND and eMMC BGA packages For T48 Programmer only ZIF socket rated for 50,000 actuations Item includes: 1x ADP-BGA63-E001 (BGA63 ZIF Header & T48 adapter bottom board), IC Positioning frame 9X11 mm, IC Positioning frame 10.5X13 mm

These handy adapters allow you to easily program 8mm*14mm 32-pin TSOP chips with your T48, T56 or TL866 programmer. The durable ZIF socket ensures a secure connection to the pins. If your programmer supports your desired chip, or the DIP32 equivalent, this adapter will work. Please Note: check the Pin orientation on your particular programmer, as show in the example XGECU images the adapter sits off center in the DIP socket. Features and Specifications: Easy to use: Simply plug the adapter into your programmer and then insert the TSOP chip Secure connection: The ZIF socket ensures a secure connection to the pins Support 12.4mm 0.5mm pitch 8mm*14mm 32-pin TSOP IC's Supports SST39SF020A, SST39SF040, SST39LF512, SST39LF010, SST39LF020, SST39LF040,SST39VF512, SST39VF010, SST39VF020, SST39VF040 and more Ideal for XGECU T48, T56, TL866 series programmers Will work with most other DIP32+ programmers such as GQ-4X, TOP853/TOP2004/TOP2005/TOP2048, G540/G840/VS4800, TNM2000/TNM5000, EasyPro, SuperPRO Pin count: 32 (Socket) 32 (Base) DIP Connector: Pitch 100mil (2.54mm) / Width 600mil (1.52cm) Package type: TSOP Socket type: ZIF Item includes: 1 x 648A0322211-A01 TSOP32-DIP32 Programmer Adapter

Add extra functionality to your XGecu T48 programmer with this BGA NAND and NOR Module. The ADP_BGA48_E001 Adapter allows for reading and programming a wider range of more exotic chips in 0.8mm BGA packages with your T48 (TL866-3G) programmer. The heavy duty ZIP socket features precision pins that can work on any BGA48 module with or without solder balls, this makes it great for recovery work as well as programming fresh stock. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with NOR and NAND flash devices 0.8 mm BGA48 packages Supports BGA48 chip sizes: 6*8 mm, 6.15*8.15 mm, 6.5*8 mm Row spacing 600mil Item includes: 1x ADP_BGA48_E001, 1x ISP cable, 1x 6*8 Plate, 1x 6.15*8.15 Plate, 1x 6.5*8 Plate

This TSOP56 3-IN-1 adapter module for the XGecu T48 programmer adds enhanced functionality. The three adapter plates enable reading and programming of various TSOP56 packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIF socket is ideal for recovery and/or programming operations. This adapter replaces the older SN001 series of boards which do not work on the T48 as XGECU has removed support for them. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with TSOP56 0.5mm NOR, NAND, EMMC, EPROM IC packages For T48 Programmer only Ideal for 29XXXTSOP56, 28F32/64/128/256, 28F128/256/512/00A-P, S29GL128NxxTAx02 and similar IC's Replaces TL866II SN001 and TSOP socket adapters ZIF socket rated for 10,000 actuations Plate ADP_F56_EX-A supports: 29xxx series chips Plate ADP_F56_EX-B supports: 28F32/64/128/256 series chips Plate ADP_F56_EX-C supports: 28F128/256/512/00A-P series chips Item includes: 1x TSOP56 Header PLate, 1x ISP cable, 1x ADP_F56_EX-A, 1x ADP_F56_EX-B, 1x ADP_F56_EX-C

Supporting 31000+ types of ROM, EPROM, EEPROM, NAND, GAL, SRAM, EMMC, AVR, MCU, The TL48 (TL866-3G) takes over as XGecu's entry programmer from the venerable TL866 series. Closer in specification to their bigger sibling the T56, these feature rich programmers will help you ensure you can get the job done. With a high-quality 40-pin industrial ZIF Socket, improves all features of the older TL866II Plus programmers. Using a 120Mhz 32-bit MCU and 4-layer PCB design, this professional T48 programmer supports high-capacity NAND EMMC up to 256GB, with faster programming speeds than the TL866II. With high-voltage chips support upto a VPP Maximum of 25V, you can program a wider variert of chips, a lot of older or vintage EPROMS require these far higher voltages. Please visit our T48 Downloads Page for the latest software, manuals and chip support list. Need additional adapters? Browse our T48 range to find suitable adapters. After purchase we will send links to download the software and manuals. Need additional adapters? Browse our T48 range to find suitable adapters. Please get in touch if you need a chip support list. Features: Everything you loved about the TL866II series and more... 120Mhz 32-bit MCU with 4-layer PCB Design, USB2.0 480Mhz Connection 16 channel ISP 56-channel dedicated IO with high-speed high-voltage isolation Replaceable high quality 40pin ZIF socket, extends the life of heavily used programmers VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable. Power consumption: 5V <500MA. Static power consumption: 60mA. Without external power supply interface. Self-test function, self-test each pin of VPP/VCC/GND/IO Program, Read, Write, Test and more. Supports over 31000+ types of ROM, EPROM, EEPROM, NAND, GAL, SRAM, EMMC, AVR, MCU etc.... Kits contain different adapters to cover a wide range of chip styles. See the images for which adapters are included with each kit version. Can attach upto 4 programmers to on PC for small batch runs. Support WIN2000, WINXP, WIN2003, WIN2008, WIN VISTA, WIN7, WIN8, WIN10(32&64 bit) Additional Information: Click to view Additional Information × Specifications: 120Mhz 32-bit MCU with 4-layer PCB Design, USB2.0 480Mhz Connection Volume: 10cm x 6cm x 2.8cm 40-pin drive IO design. Non-full drive, IO voltage is not adjustable. VCC voltage 1.8-6.5V 32 levels adjustable,VPP voltage 9V-18V 32 levels adjustable.VCC 120MA over current protection, VPP 100MA over current protection. VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable. Power consumption: 5V <500MA. Static power consumption: 60mA. Without external power supply interface. Self-test function, self-test each pin of VPP/VCC/GND/IO Suitable for developers and maintenance personnel, can do small batch production for small capacity chips, support simultaneously working with 4 Programmers on each computer 30000+ supported devices from hundreds of manufacturers by 7.05 version of SW (Mar. 1th, 2018). NAND FLASH: Samsung K9xxx, SK Hynix (ex Hynix) HY27xxx, H27xxx, Micron MT29Fxxx, NANDxxx, Spansion S34xxx, NAND Toshiba TH58NVGxxx. Serial NAND FLASH: Micron MT29Fxxx. Serial Flash: standard SPI, high performance Dual I/O SPI and Quad I/O SPI (25Bxxx, 25Dxxx, 25Fxxx, 25Lxxx, 25Pxxx, 25Qxxx, 25Sxxx, 25Txxx, 25Uxxx, 25Vxxx, 25Wxxx, 25Xxxx, 26Vxxx, 45PExx, MX26Lxxx ).DataFlash (AT45Dxxx, AT26Dxxx) Parallel NOR Flash: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, Samsung'sK8Pxxxx, K8Dxxxx series, ... EPROM: NMOS/CMOS, 27xxx and 27Cxxx series EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, Serial E(E)PROM: 24XXX,25XXX series, Microcontrollers MCS51 series:89Cxxx, 89Sxxx, 89EXXX,89VXX Microcontrollers Atmel AVR 8bit/16bit: AT90Sxxxx, ATtiny, ATmega series Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, PIC24xxx series GAL Programmable logic device programming and SRAM test I.C. Tester: TTL type: 54,74 S/LS/ALS/H/HC/HCT series; CMOS type: 4000, 4500 series; Static RAM: 6116 ..

These BGA24 to DIP8 Zif Adapters provide a convenient way to enhance your IC Programmer. Compatible with 4x6mm or 5x5mm packages, the adapter enables users to quickly insert the chip and then use a as regular DIP8 package with the programmer, eliminating the need to solder the chip to a pad board. They are suitable for use with many programmers, such as EZP2023, T48, RT809F, TL866II, T56 and more. Looking for other DIP8 adapters? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other DIP8 adapters? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Specifications: Style: Adapter Model: BGA24 to ZIF Adapter Applicable IC Packages: BGA24 5x5, BGA24 4x6 Package size: 5*5mm or 4*6mm Programmer connector: DIP8 Suitable Programmers: XGecu T48, TL866II and T56 series RT809F EZP2019+, EXP2023 Also suitable for Superpro, TNM, TOP, GQ-4X, Stager, SOFI and more. Package Includes: 1x BGA 24 5x4 OR 4x6 to DIP8 Adapter

This adapter enables simple programming of 8mm*14mm 32-pin TSOP chips using a T48, T56 or TL866 programmer. The secure ZIF socket ensures proper electrical connection to the pins. Users can use this adapter for any chip compatible with their programmer, or with its DIP32 equivalent.  Please Note: check the Pin orientation on your particular programmer, some programmers may need the adapter placed a certain way. Features and Specifications: Easy to use: Simply plug the adapter into your programmer and then insert the TSOP chip Quick and Secure: The durable ZIF socket allows for quick and easy programming Support 12.4mm 0.5mm pitch 8mm*14mm 32-pin TSOP IC's Supports SST39SF020A, SST39SF040, SST39LF512, SST39LF010, SST39LF020, SST39LF040,SST39VF512, SST39VF010, SST39VF020, SST39VF040 and more Ideal for XGECU T48, T56, TL866 series programmers Compatible with common DIP32+ programmers, such as GQ-4X, TOP853/TOP2004/TOP2005/TOP2048, G540/G840/VS4800, TNM2000/TNM5000, EasyPro, and SuperPRO. Pin count: 32 (Socket) 32 (Base) Package type: TSOP DIP Connector: Pitch 100mil (2.54mm) / Width 600mil (1.52cm) Item includes: 1 x CNV-TSOP-EP1M32 TSOP32-DIP32 Programmer Adapter

If you have a T56 or TL866 series programmer and are lacking adapters to fit more exotic chips, this kit is just the thing for you. The kit contains various TSOP (Thin Small Outline Package) and two SOP (Small Outline Package) adapters. This kit is great for allowing you to read and write various flash types for BIOS, TV's, Games Consoles, Laptops, White Goods, Home Audio Video equipment and much more. If your programmer supports the chips you need to deal with, these adapters will get the job done. Please note: XGECU removed support for the SN001 series boards from T48 programmers, do not purchase these for use on the T48. Please search our T48 collection for a suitable adapter, or get in touch and we'll be happy to help find a suitable solution. Kit Includes: TSOP32/TSOP40/TSOP48 Solder Board (SN001-5) TSOP32/TSOP40/TSOP48 ZIF (SN003) TSOP40A (SN001-2) TSOP48/SOP44 2-in-1 NOR base board (SN001-1) TSOP32 (SN001-4) TSOP40B (SN001-3) SOP44 ZIF SOP56

The XGECU SD and EMMC 8*6mm  flash adapter module for the XGecu T48 programmer adds the ability to read and program SD Cards and EMMC chips with the T48 (aka TL866-3G) programmer. Able to accept full size SD, Micro SD, Transflash and EMMC, it's ideal for recovery and/or programming operations. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with SD, MultiMediaCard / MMC, Mini SD (using a Mini to full size adapter), Micro SD, Transflash / TF and 8*6mm EMMC modules For T48 Programmer only Item includes: 1x EMMC SD Adapter

These DIP8 Probes are ideal for reading, programming, or testing DIP8 ICs in-situ. Simply connect the base to your programmer, select the appropriate IC in your programmer software, place the Probe on your DIP8 chip, and you're good to go! Save time, effort, and potential PCB damage by using these probes for In-system programming (ISP), also called in-circuit serial programming (ICSP).These probes are suitable for use with most programmers. If your programmer supports the chip, you can use this clip. Looking for other DIP8 adapters? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other DIP8 adapters? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Specifications: Style: Adapter Model: DIP8 Probe Applicable IC Packages: DIP8 Pin spacing: 2.54mm Programmer connector: DIP8 Suitable Programmers: XGecu TL866II, T48, T56, RT809F, RT809H, EZP2019+, EZP2023, CH341A, Superpro, TNM, TOP, GQ-4X, Stager, SOFI and more. Package Includes: 1x DIP8 probe adapter

Add extra functionality to your XGecu T48 programmer with this SOP44 Module. The ADP_S44_EX-1 Adapter allows for reading and programming a wider range of more exotic chips in 1.27mm SOP44 packages with your T48 (TL866-3G) programmer. The heavy duty ZIP socket features precision contacts and is rated for over 10,000 actuations. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with 1.27mm PSOP44/SOP44/SOIC44 Ideal for programming AM29F200BB and similar IC's Supports PSOP/SOP/SOIC devices up to 44 pins (for example EPROMs) High quality SOP44 ZIF socket Row spacing 600mil Item includes: 1x ADP_S44_EX-1, 1x ISP cable.

Enhance your T48, TL866II or T56 programmer with this handy QFN8 Zif Adapter. Suitable for both 6*5mm and 8*6mm packages, simply pop the chip in the adapter, then insert into your programmer like a regular DIP8 package. Save time and effort by not having to solder to a regular pad board. These are suitable for use with many programmers, if your programmer supports the chip you wish to program this adapter should work. Looking for other DIP8 adapters? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other DIP8 adapters? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Specifications: Brand Name: XGECU Style: Adapter Model: QFN8 two-in-one Applicable IC Packages: QFN8, WSON8, MLF8, MLP8, DFN8 Package size: 6*5mm and 8*6mm Package Pitch: 1.27mm Programmer connector: DIP8 Suitable Programmers: XGecu T48, TL866II and T56 series RT809F EZP2019+ Also suitable for Superpro, TNM, TOP, GQ-4X, Stager, SOFI and more. Package Includes: 1x QFN8 TO DIP8 two-in-one adapter

This TSOP40/TSOP48 NOR flash adapter module for the XGecu T48 programmer adds enhanced functionality. The ADP_F48_EX-1 Adapter permits precise reading and programming of TSOP packages with the T48 (aka TL866-3G) programmer. Featuring precision pins, the durable ZIF socket is ideal for recovery and/or programming operations. This adapter replaces the older SN001 series of boards which do not work on the T48 as XGECU has removed support for them, ideal if you are trying to program AM29LV800BB or similar chips. Please note: This adapter only can work on the XGecu T48 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II or T56. Please see the 'Info' link at the top of the description for the T48 chip support list. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T48 adapters? View our T48 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: For use with TSOP48 TSOP40 IC packages For T48 Programmer only Ideal for AM29LV800BB, M29W320DB and similar IC's Replaces TL866II SN001 and TSOP socket adapters ZIF socket rated for 10,000 actuations Item includes: 1x ADP_F48_EX-1, 1x ISP cable