SUNLU (14)

The Fila Dryer S1 is the perfect way to keep your PLA, PETG, TPU, or ABS filament clean, dry, and ready to print. Simply pop your spool of filament inside and the Fila Dryer S1 will keep it at the perfect temperature for printing. This helps to achieve more consistent print results, especially on larger models where temperature changes can vary greatly during a print. The Fila Dryer S1 also has a timer function allowing you to set it to pre-heat your filament so it's at optimal temperature when you need it. The box has a pass through in the flap allowing your filament to leave without reducing the overall spool temperature. Features: Reduce filament water absorption characteristics, intelligent heating can dry the moisture in the filament. Dry filament helps ensure that your filament is back to 100% high-quality state during printing! Extend the shelf life of the filament by keeping it fresher for longer. Adjustable heating temperature: Temperature selection (range of 35~55°C) Wrap and bake, heating is more uniform, and the baking effect is better. Timing function: set heating time, set time, enter standby state, safe and secure LCD display: 2 inches LCD display, display temperature and time. Double temperature probes can measure the temperature of the cabinet and heating plate in real time to ensure the safety of the filament. Specifications: Name: S1 Filament Dryer Box Color: White Temperature range: 35-55℃ Plug: Please pick from AU, EU, US, UK Suitable Filament Diameter: 1.75mm/2.85mm/3.00mm Suitable Filament Type: All Filaments inc. PLA, PETG, ABS, TPU, Carbon Fibre, Silk, Marble, Wood and more Pack contains: 1x SUNLU S1 Filament Dryer, 1x Mains Adapter (PLUG AS SELECTED) Additional Images: Click to view Full Specifications ×

SUNLU PLA and PLA+ Filament are high quality bubble free filaments, suitable for use in most FDM style 3D Printers such as Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed and more. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers. PLA Features: SUNLU PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3D Printer, suitable for printing artworks, crafts, models, light duty tools and prototypes. 100% No bubble fresh 3D Printer filament. PLA+ Features: PLA+ is a more durable form of traditional PLA, it can give strength similar to PETG or ABS but with the ease of PLA printing techniques. Ideal for applications where you need a more durable print but not necessarily the heat or acid resistant properties of PETG or ABS. Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PLA Specifications: PLA Filament Diameter: 1.75mm/3.0mm PLA Diameter Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend print Temperature: 200-230°C Platform temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length：1.75mm(1kg)=330m PLA+ Specifications: Model: PLA PLUS (PLA+) Diameter Format: 1.75mm Print Temp.: 210-235°C Tolerance: ±0.02mm Print Speed： 50-100mm/s Platform Temp： Depends on the platform: No need or 60-80℃ Net Weight: 1kg Gross Weight: 1.3kg Packing Size: 209*209*73mm Length: 330m Tensile Strength: 11-15kgf Melt Flow Rate: 9-11g/10 min(190℃,2.16kg) Certificate: RoHS, Reach

SUNLU ABS 3D Printer filament is great for projects requiring a more rigid, higher temperature resistant and machinable print. It's a great choice for engineers and others where mechanical uses are important. ABS is one of the most commonly used engineering plastics, it’s a recommended material for beginners because of the loose temperature requirement during extrusion process. Provides excellent performance for 3D printers requiring 1.75mm filament, including Creality, Artillery, SUNLU, Geeetech, Makerbot, Mendel, reprap, UP, Prusa, Huxley, uPrint, Cubify, printrbot, Sumpod Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. Features: Has excellent impact strength and wear resistance; Chemical resistant Requires a heated bed plate on your printer Ideal for strong print strength requirements Suitable for printing small parts Specifications: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 230-270℃ Floor temperature: 80-120℃ Tension (KGF): 6-11 Melt index: 12-19g/10min Elongation at break: 25% Print speed: 50-100MM/s Bubbles: 100% zero bubbles Net weight: 1 KG/roll Gross weight: 1.3 KG/roll approx. Length: 1.75MM(1KG)=395M approx.

SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers. Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Filament Features: Environmental protection and non-toxic; Bright color; Low shrinkage; Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion. Good dimensional stability, no cracks or warping. High transparency and good gloss. Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc. Product Parameter: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 220-250℃ Bottom plate temperature: need to apply glue when not heating Heating 60-80℃, no glue Rally (KGF): 8-14 Melt index: 6-11g/10min (220℃, 2.16kg) Elongation at break: 210% Printing speed: 50-100MM/s Air bubbles: 100% zero bubbles Net weight: 1KG/roll Gross weight: 1.3KG/roll Length: 1.75MM(1KG)=320M

SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers. Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Filament Features: Environmental protection and non-toxic; Bright color; Low shrinkage; Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion. Good dimensional stability, no cracks or warping. High transparency and good gloss. Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc. Product Parameter: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 220-250℃ Bottom plate temperature: need to apply glue when not heating Heating 60-80℃, no glue Rally (KGF): 8-14 Melt index: 6-11g/10min (220℃, 2.16kg) Elongation at break: 210% Printing speed: 50-100MM/s Air bubbles: 100% zero bubbles Net weight: 1KG/roll Gross weight: 1.3KG/roll Length: 1.75MM(1KG)=320M

SUNLU PETG and PLA Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Please make sure you double check colour and material when placing your order. Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Features Good toughness, high hardness Impact strength is 30 times more than PLA and the elongation at break of more than 50 time PLA. Compatible printers must have heating device, ideal for printing heat resistant and transparent models, such as: lampshades. PETG Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend print Temperature: 230-250°C Platform temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.3kg Length：1.75mm(1kg)=395m PLA Features: PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3d Printer, suitable for printing artworks and crafts. 100% no bubble 3d Printer filament. PLA Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend Print Temperature: 190-220°C Platform Temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length: 1.75mm(1kg)=330m PLA+ Features: PLA+ is a more durable form of traditional PLA, it can give strength similar to PETG or ABS but with the ease of PLA printing techniques. Ideal for applications where you need a more durable print but not necessarily the heat or acid resistant properties of PETG or ABS. PLA+ Specifications: Model: PLA PLUS (PLA+) Diameter Format: 1.75mm Print Temp.: 210-235°C Tolerance: ±0.02mm Print Speed： 50-100mm/s Platform Temp： Depends on the platform: No need or 60-80℃ Net Weight: 1kg Gross Weight: 1.3kg Packing Size: 209*209*73mm Length: 330m Tensile Strength: 11-15kgf Melt Flow Rate: 9-11g/10 min(190℃,2.16kg) Certificate: RoHS, Reach

SUNLU PLA Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PLA is a stronger filament and more rigid than ABS, and the printed objects will have a more glossy look and feel compared to ABS. As a material, PLA has much less warping versus ABS. Unlike ABS, PLA can be sanded and machined. Additionally, a heated bed is not required to print it. PLA usually enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds. It is also compatible with different brands of 3D printers (such as Makerbot, Mendel, RepRap, UP, Prusa, Huxley, BFB3000, uPrint, Cubify, printrbot, Sumpod) These great twin packs are great value against ordering single spools. Features: Eco-friendly/Biodegradable High strength Low shrinkage. Perfectly guarantee the model size Rapid condensation. easy to print Odorless,non-toxic. Harmless to human body Important Information About The Packaging: SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. Additional Images: Click to view Additional images × Specifications: PLA Filament Diameter: 1.75mm/3.0mm PLA Diameter Tolerance: +/-0.02mm Print speed: 50-100mm/s PLA Filament : 26 colors(Black,white,grey,red yellow,green,purple,blue,brown,etc..) Recommend print Temperature: 200-230°C Platform temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length：1.75mm(1kg)=330m

SUNLU TPU Filament is ideal for making models and prints that requires a bit of flex to them, easy to print and retains its elastic properties better at lower temperatures. TPU material also has a higher abrasion resistance and a higher resistance to oils and greases. TPU filament, unlike other stiffer thermoplastic, has qualities that include flexibility and conformity. It also has an excellent interlayer adhesion and no curling or delamination during the 3D printing process. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. TPU Features: TPU flexible filament is non-toxic, easy to feed, easy to forming, high toughness and resilience material. Ideal for print children’s toys, shoes, etc. Costume and Cosplay Parts 100% no bubble 3d printer material. When printing thinner and less filled models, the softer and more flexible it will be. Low viscosity, easy to cool. Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 20-40mm/s Recommended Print Temperature: 185-215°C Recommended Hotbed Temperature: Hotbed not required Net weight: 0.5kg with spool Gross weight: 0.85kg Length：1.75mm(0.5kg)=165m TPU Printing Tips: TPU has rubber elasticity, For soft material printing, speeds need to be set a little slower, around 30-50mm/s. The printing accuracy of soft materials should be set a bit larger. If you set the height of the layer is too small, it can be difficult to print, a layer height of 0.3mm or 0.4mm can achieve very fine and smooth results. The operation can be more difficult than other materials. Most of flexible filament printing issues are related to model extrusion structure, feeding needs an active drive extruder. Because it is a soft and elastic material, TPU can occasionally get stuck on the bite gear due to resistance, Aim for high temperature and slow printing, and keep it free from dragging and snagging. Because the TPU itself is particularly fluid, particularly delicate, set the accuracy of printing 0.3mm can achieve the accuracy of PLA 0.1mm!

Add some sparkle to your life with this new twinkling 3D printer filament from SUNLU. Ideal for modelers and cosplay costumes, props and more. Suitable for printing on most 3D printers from Creality, Artillery, GeeeTech, SUNLU, JG Maker and more. As the glitter is an integral part of the filament, it saves work later trying to coat a piece in glitter. As it is part of the print a minor scuff or scratch to the part will not create a bald patch. Important Information About The Packaging ⠀ SUNLU produce four styles of packaging for their filament, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. Specifications: Brand Name: SUNLU Material: PLA Quantity: 1 Spool Colours: Black or Blue Filament Diameter: 1.75mm Printing Temperature: 200-230°C Features: Eco-friendly, good toughness, bright color Application: 3D Printing, 3D Pen Net Weight: 1kg with spool Gross Weight: 1.4kg (Approx) Filament packing: Vacuum bag packing