Products

Sovol SV08 CoreXY 3D Printer: Large format 350x350x345mm 700mm/s Klipper powered Open Source 3D Printer from NSE Imports #1.

Sovol SV08 CoreXY 3D Printer: Large format 350x350x345mm 700mm/s Klipper powered Open Source 3D Printer from NSE Imports #2.

Ships from: The UK Sovol SV08 CoreXY 3D Printer: Large format 350x350x345mm 700mm/s Klipper powered Open Source 3D Printer £565.95

The Sovol SV08 3D Printer is a pre-assembled CoreXY printer that is powered by the open-source Klipper engine, making it easily accessible for both novices and professionals. With its spacious printing area of 350x350x345mm, users can confidently print larger, more intricate designs. With a simple setup process and sturdy cage design, this printer is perfect for DIY enthusiasts looking to unleash their creativity. With WiFi connectivity and a built-in camera you can control and monitor your workflow with ease. 4 Independent Z Motor Gantry Using four independent Z motors, the gantry system can be easily and precisely levelled, thanks to Quad-Gantry-Levelling (QGL). This feature not only improves print accuracy, but also identifies and compensates for any wear or damage, minimising the potential for print failures. Klipper Input Shaping and Pressure Sensing technology The Sovol SV08 3D Printer boasts the Klipper firmware, elevating printing speed and accuracy to state-of-the-art levels. This powerful firmware not only increases processing speed but also enables advanced features such as "Input Shaping" to minimize vibration patterns, "Pressure Advance" for flawless prints, and "PID Tuning" to reduce temperature fluctuations in the nozzle and heat bed. Save 5% on Your First Filament Order!* Key Features and specifications: Ultra-Fast Printing: Achieve rapid print times with speeds reaching up to 700mm/s (maximum). High-Temperature Printing: The all-metal hot-end allows printing with a wider range of filaments at temperatures up to 300°C, while the hotbed can reach up to 100°C. Precision Extrusion: The innovative planetary dual-gear direct drive extruder ensures smooth and reliable filament feeding for accurate prints. Built-In Camera: Keep an eye on your prints with ease. 4 Independent Z Motor Gantry: Improve print quality and reliability Large Build Volume: The spacious 350x350x345mm build volume lets you create large prints with ease. WiFi connectivity: No need to be chained to your desk, monitor, start/stop and tune your printer all from your phone or computer. See our additional information section for even more specifications and features. Warranty and Support: This 3D Printer ships directly from SOVOL ensuring the latest stock is supplied. All SOVOL 3D Printers have a 12 month guarantee. We provide support in the first instance, if required we will refer it to SOVOL for technical advice or spares to be sent. Additional information: Click to view Additional information × Core-XY 40000mm/s^2 Max Acceleration 700mm/s max print speed: SVO8 utilizes CoreXY kinematics tode crease moving mass and enhance motion control, consequently boosting maximum acceleration and toolhead movement speed. All-axes Linear Rails: SVO8 utilizes linear rails for all 7 axes (4Z+2Y+1X) to improve precision and resistance to axial movement deformation.The provision of smooth and precise linear motion is crucial for producing high-quality prints. These rails guide the printer's print head and build platform, ensuring accurate positioning and consistent, smooth movement throughout the printing process. Open-Source OrcaSlicer Slicing: OrcaSlicer offers arc fitting, variable line width, and spiral ascent. It also includes intelligent cooling, overhang speed reduction, and segmented retraction. The software optimizes nozzle paths for faster printing and features a user-friendly, categorized interface with clear content for easy operation. As an open-source slicer, it supports configurations for various printer brands. Built-in Camera: SVO8 is equipped with a camera that allows monitoring of the printing process in real time. Additionally, it enables the capturing of time-lapse footage, which is the ability to closely observe and document the printing process, offering convenience and insight into the printing experience. Ceramic Heating Block & AC Power Heated Bed: Our high-performance 3D printer heats up rapidly, Ceramic Plate Heating & High-Flow Nozzle reach 300°C quickly and 220°C in 40 seconds. Using ceramic heating block & AC heated bed reduce heating time by 70%, allowing near-instant printing and easy preheating for nozzle cleaning and leveling. Enjoy precise, high-quality prints with versatile material compatibility. Remote Control: Simply connect SV08 to your LAN using WiFi or an Ethernet port enables convenient interaction with your printers and grants access to a range of features. *When you purchase a SOVOL printer, we'll email a voucher code to use on your filament order.

Add to cart

Spaghetti Strap Camisole Dress: Tulle mesh mini dress, for summer, parties, and any occasion from NSE Imports #1.

Spaghetti Strap Camisole Dress: Tulle mesh mini dress, for summer, parties, and any occasion from NSE Imports #2.

Ships from: China Spaghetti Strap Camisole Dress: Tulle mesh mini dress, for summer, parties, and any occasion £31.95

Elevate your style with this exquisite high-waisted dress. Featuring a delicate frill design and a flowing tulle overlay, this dress offers a touch of romance and elegance. Its versatile silhouette allows for endless styling possibilities, whether you prefer a minimalist look or want to add layers for a more dramatic effect. Please refer to our size guide for the perfect fit. Size Bust Length Waist Size S Bust 82cm32.3in Length 75cm29.5in Waist 60cm23.6in Size M Bust 86cm33.9in Length 76cm29.9in Waist 64cm25.2in Size L Bust 90cm35.4in Length 77cm30.3in Waist 68cm26.8in Key features: High-waisted design Frilly details Tulle overlay V-neckline Spaghetti straps Lace accents Above-knee length Polyester, mesh, and voile construction Sleeveless Available in multiple sizes

Add to cart

Straight Ceramic Tweezers for Electronics & Soldering work - Precision Anti-Magnetic/Static Tweezers from NSE Imports #1.

Straight Ceramic Tweezers for Electronics & Soldering work - Precision Anti-Magnetic/Static Tweezers from NSE Imports #2.

Ships from: China Straight Ceramic Tweezers for Electronics & Soldering work - Precision Anti-Magnetic/Static Tweezers £5.95

These Ceramic tipped tweezers are ideal for both soldering and elctrical work. Able to withstand high temperatures they are ideal for soldering smaller components with risk of deformation. For electrical work the non conductive Cermaic tips help prevent accidental shorts from brushing against other components. Features & Specifications: Ceramic tips are non magnetic and non static, suitable for the precision operation of sensitive electronic components The Ceramic tweezer tips have a strong resistance to heat, can withstand 1600°C without cracking Material: Stainless Steel, Ceramic Size: 12.5cm Color: Black/Silver Package contents: 1 x Ceramic Tipped Tweezer

Add to cart

Strawberry Gum Cheerleader Student Uniform Women's Cardigan Korean Style V-neck Knitted Female Casual Kawaii Geek from NSE Imports #1.

Strawberry Gum Cheerleader Student Uniform Women's Cardigan Korean Style V-neck Knitted Female Casual Kawaii Geek from NSE Imports #2.

Ships from: China Strawberry Gum Cheerleader Student Uniform Women's Cardigan Korean Style V-neck Knitted Female Casual Kawaii Geek £18.95

Wrap up warm and head out in style with this great Cheerleader Style Cardigan, it's a great design that will team up well with jeans, skirts, blouses and more. The design is styled like a giant Chewing Gum packet with a strawberry on the breast and a larger version on the rear. Size Bust Length Sleeve Shoulder Size One-Size Bust 130cm50.7in Length 70cm27.3in Sleeve 45cm17.5in Shoulder 61cm23.8in The little details: Material: Polyester, Acrylic Knit Style: Tight-Knit Pattern Type: Letter, Fruit, Chewing Gum Clothing Length: Regular Collar: V-Neck Item Type: Women's Cardigan, Ladies Cardigan, Girls Cardigan, Geek Cardigan Sleeve Length: Full Sleeve Style: Regular Decoration: Embroidery Thickness: Standard Closure Type: Single Breasted, Buttons Gender: Women, Females, Girls, Ladies, Woman Style: Casual, Daily, Everyday, University, College

Add to cart

Sturdy Holder For Phones and Tablets: Adjustable Stand, suits iPad, Tablets and large phones from NSE Imports #1.

Sturdy Holder For Phones and Tablets: Adjustable Stand, suits iPad, Tablets and large phones from NSE Imports #2.

Ships from: China Sturdy Holder For Phones and Tablets: Adjustable Stand, suits iPad, Tablets and large phones £30.95

Get hands-free with this sturdy holder designed for phones and tablets! Watch your favourite shows or videos without straining your hands or wrists. Perfect for cooking, gaming, or video calls - it's a stand that's got your back (and your device). With a 360° rotatable head and adjustable arm, you'll always have the perfect viewing angle. No more tipping over thanks to the weighty base. Features: Available in Black or Silver finishes 360° Rotation, get the screen angled just right. Suits 5 inch or greater phones. Suits Phones, Phablets, Tablets or iPad up to 12.9 inches. Specifications: Supports Mobile Phones from 5 inches upwards (Landscape orientation) Supports Tablets and iPads upto 12.9 inches Clamp extends from 6.3 inches / 16cm up to 10.2 inches / 26cm Soft but durable Silicone pads hold tablet in place securely Suits iPhone 8 Plus, iPhone X/XS, iPad Mini 2/3/4, iPad (All generations), iPad Pro Suits Samsung Galaxy Tab S7 Plus, Samsung Galaxy Tab S6 Lite, Samsung Galaxy Tab S6, Huawei MatePad Pro, Samsung Galaxy Tab S4, Amazon Fire HD 8 Plus, Amazon Fire HD 10 , Amazon Fire HD 8.

Add to cart

SUNLU 3D Printer Enclosure: Ideal for Ender 3/Ender 5 or similar upto 235mm² bed from NSE Imports #1.

SUNLU 3D Printer Enclosure: Ideal for Ender 3/Ender 5 or similar upto 235mm² bed from NSE Imports #2.

Ships from: China SUNLU 3D Printer Enclosure: Ideal for Ender 3/Ender 5 or similar upto 235mm² bed £112.95

Keep your 3D printer snug and toasty with these SUNLU Printer "Homes". The main function of these enclosures is to keep a steady temp inside the printing chamber and protect your prints from unwanted mishaps. This enhances the overall quality and consistency of your prints. Plus, with an interior made of fireproof aluminium film, it's both safe and stylish. And don't forget the added bonus of reduced printer noise from this cosy "abode"! Features: Suitable for: Sunlu T3Creality Ender 3 / 3 Pro / 3 S1 / 3 S1 Pro / 5 / 7Anycubic Mega Pro / KobraELEGOO Neptune 3& Similar dimension printers User-friendly design: Features a transparent window for easy monitoring and convenient access ports for filament and cables Minimises warping: Reduces warping and curling for dimensionally accurate prints Easy to assemble: The lightweight frame easily assembles, ideal if you cannot keep the enclosure permanently assembled Aluminium film and flame-retardant material. In the rare instance of fire, it's contained Feed hole and tool pouch: Keep everything handy and accessible Specifications: Product: 3D Printer Enclosure Brand: SUNLU Gross Weight: 1.7kg Dimensions: 550x650x750mm Package Includes: 1 x 3D Printer Enclosure

Add to cart

SUNLU ABS Filament Great for rigid prints: Suits most FDM Printers, 1.75mm, 1kg, Suits most 3D Printers from NSE Imports #1.

SUNLU ABS Filament Great for rigid prints: Suits most FDM Printers, 1.75mm, 1kg, Suits most 3D Printers from NSE Imports #2.

Ships from: China SUNLU ABS Filament Great for rigid prints: Suits most FDM Printers, 1.75mm, 1kg, Suits most 3D Printers from £32.95

SUNLU ABS 3D Printer filament is great for projects requiring a more rigid, higher temperature resistant and machinable print. It's a great choice for engineers and others where mechanical uses are important. ABS is one of the most commonly used engineering plastics, it’s a recommended material for beginners because of the loose temperature requirement during extrusion process. Provides excellent performance for 3D printers requiring 1.75mm filament, including Creality, Artillery, SUNLU, Geeetech, Makerbot, Mendel, reprap, UP, Prusa, Huxley, uPrint, Cubify, printrbot, Sumpod Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. Features: Has excellent impact strength and wear resistance; Chemical resistant Requires a heated bed plate on your printer Ideal for strong print strength requirements Suitable for printing small parts Specifications: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 230-270℃ Floor temperature: 80-120℃ Tension (KGF): 6-11 Melt index: 12-19g/10min Elongation at break: 25% Print speed: 50-100MM/s Bubbles: 100% zero bubbles Net weight: 1 KG/roll Gross weight: 1.3 KG/roll approx. Length: 1.75MM(1KG)=395M approx.

Add to cart

Sold out

SUNLU Adjustable Filament Holder: Holds up to 5kg spools, ideal for multi colour printers from NSE Imports #1.

SUNLU Adjustable Filament Holder: Holds up to 5kg spools, ideal for multi colour printers from NSE Imports #2.

Ships from: China SUNLU Adjustable Filament Holder: Holds up to 5kg spools, ideal for multi colour printers £15.95

The SUNLU Adjustable Filament Holder is perfect for spool organisation, whether it be as an upgrade or for adding more holders. Its innovative multi-mount feature means it can stand alone or be attached to most gantry-style 3D printers, complete with fittings. Perfect for printers with multiple color capabilities! Features and Specifications: Adjustable width: Holds spools between 56mm to 140mm Supported spools weights: 1kg, 2kg, 3kg and 5kg Multipurpose: Free standing or mountable using included T-Nuts Durable Nylon pulleys: Able to smoothly feed a 5kg spool Weight: 0.38kg (approx.) Dimensions: 166x44x56 to 140mm

SUNLU Carbon Fiber PLA Filament Twin Pack: 2*1kg Create Extremely Rigid Prints from NSE Imports #1.

SUNLU Carbon Fiber PLA Filament Twin Pack: 2*1kg Create Extremely Rigid Prints from NSE Imports #2.

Ships from: The UK SUNLU Carbon Fiber PLA Filament Twin Pack: 2*1kg Create Extremely Rigid Prints £43.95

Choose Sunlu PLA Carbon Fiber Filament to Create Ultra-Sturdy Prints! This special blend of PLA and carbon fiber particles creates a one-of-a-kind speckled look and supercharges your prints with up to 5x the strength and 3x the resilience. Perfect for tough, durable parts that can handle any challenge! These twin packs help you print more for less. You'll need to crank up the heat to 215-225°C, but trust us, it's worth it. And watch out for its abrasive nature - we recommend a hardened steel nozzle to keep your printer in tip-top shape. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. Product Parameter: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Color: Black Recommend Print Temperature: 200-230℃ Heated Bed Temperature: 60-80℃ Melt index: 11-16g/10min Elongation at break: 3% Net weight: 1kg with spool Gross weight: 1.3kg Length：330m approx.

Add to cart

Sold out

SUNLU Fila Dryer S1+: Upgraded version, Keep Your Filament Dry and Ready to Print from NSE Imports #1.

SUNLU Fila Dryer S1+: Upgraded version, Keep Your Filament Dry and Ready to Print from NSE Imports #2.

Ships from: China SUNLU Fila Dryer S1+: Upgraded version, Keep Your Filament Dry and Ready to Print £61.95

Get ready to up your 3D printing game with the SUNLU Fila Dryer S1+: The upgraded version that keeps your PLA, PETG, TPU, and ABS filament clean, dry, and print-ready. Taking the original S1 design up a notch, the S1+ boasts improved air circulation thanks to a cool fan addition.. Create more uniform print outcomes, particularly for bigger models where temperature fluctuations can greatly impact the print. The S1 Fila Dryer has a timer feature that lets you pre-heat your filament to the perfect temperature whenever you need it. The box also features a pass through, so your filament can exit while still maintaining overall spool temperature. Features: Upgraded version: The S1+ adds a small and discrete fan to imporve airflow and heat circulation Reduce filament water absorption characteristics, intelligent heating can dry the moisture in the filament Dry filament helps ensure that your filament is back to 100% high-quality state during printing! Extend the shelf life of the filament by keeping it fresher for longer Adjustable heating temperature: Temperature selection (range of 35~55°C) Wrap and bake, heating is more uniform, and the baking effect is better Timing function: set heating time, set time, enter standby state, safe and secure LCD display: 2 inches LCD display, display temperature and time Double temperature probes can measure the temperature of the cabinet and heating plate in real time to ensure the safety of the filament Specifications: Name: S1+ Filament Dryer Box Color: White Temperature range: 35-55℃ Plug: Please pick from AU, EU, US, UK Suitable Filament Diameter: 1.75mm/2.85mm/3.00mm Suitable Filament Type: All Filaments inc. PLA, PETG, ABS, TPU, Carbon Fibre, Silk, Marble, Wood and more Pack contains: 1x SUNLU S1 Filament Dryer, 1x Mains Adapter (PLUG AS SELECTED)

Sunlu Fila Dryer S4: Easily dry and warm your filament in bulk from NSE Imports #1.

Sunlu Fila Dryer S4: Easily dry and warm your filament in bulk from NSE Imports #2.

Ships from: The UK Sunlu Fila Dryer S4: Easily dry and warm your filament in bulk £172.95

Elevate your 3D printing game with the SUNLU S4 Filament Dryer, the ultimate solution for moisture-free filament and flawless prints. This innovative dryer quadruples your drying capacity with its large chamber and four independent drying bays, perfect for multi-material printing, high-volume workflows, or simply drying multiple spools simultaneously. Features: Quadruple Drying Capacity: Each bay holds spools up to 1kg and 210mm diameter, drying four spools concurrently for maximum efficiency Precision Drying: Adjustable temperature (35°C - 70°C) and timer (1-24 hours) ensure customized drying for different filament types Extend the shelf life of the filament by keeping it fresher for longer Uniform Heating: Innovative 360° surround heating with PTC technology guarantees consistent drying throughout each spool Fast heating: Equipped with a 350W PTC heater, it only takes 30 minutes to heat up to 50 ℃, resulting in faster heating and higher efficiency Adjustable Humidity: Adjust the humidity inside the chassis. When the humidity inside reaches the set value (30% -50%), it will automatically start until the humidity drops to 25%, and then stop to better meet the humidity requirements of different types of consumables Large Capacity: Accommodates spools up to 210mm diameter and 85mm width, drying multiple spools simultaneously User-Friendly Design: Intuitive touch screen control, clear indicators, and automatic shut-off for ease of use and safety Safety Protections: PTC (Positive Temperature Coefficient Thermistor), temperature switch, software triple protection, real-time monitoring of temperature, and issuing alarm prompts in case of abnormal temperature Silent Operation: Enjoy a quiet drying experience that won't disrupt your workspace Reduce waste: Dry and reuse filament instead of throwing it away, saving money and resources The SUNLU S4 is perfect for: Demanding professionals: Ensure consistent, high-quality prints for your projects Enthusiastic hobbyists: Take your prints to the next level with superior quality and efficiency Anyone who prioritizes convenience and reliability: Simplify your 3D printing with a powerful and user-friendly dryer Specifications: Name: S4 Filament Dryer Box Color: Black Temperature range: 35°C - 70°C Size: 458 * 218 * 312mm (including tripod height) Internal size: 450 * 210 * 211mm Plug: Please pick from AU, EU, US, UK Suitable Filament Diameter: 1.75mm/2.85mm/3.00mm Suitable Filament Type: All Filaments inc. PLA, PETG, ABS, TPU, Carbon Fibre, Silk, Marble, Wood and more Maximum Working Power: 320W Pack contains: 1x SUNLU S4 Filament Dryer, 1x Mains Adapter (PLUG AS SELECTED)

Add to cart

SUNLU Marble PLA 3D Printer Filament: Create prints with a classic look from NSE Imports #1.

SUNLU Marble PLA 3D Printer Filament: Create prints with a classic look from NSE Imports #2.

Ships from: The UK SUNLU Marble PLA 3D Printer Filament: Create prints with a classic look £21.95

SUNLU Marble PLA boasts a unique matte finish with irregular swirling patterns reminiscent of real marble. This creates a visually striking filament, perfect for adding a touch of elegance and natural beauty to your 3D prints. SUNLU Marble PLA offers an intriguing alternative for those seeking to elevate their 3D creations with a textured and sophisticated look. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. Marble PLA Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend Print Temperature: 190-220°C Platform Temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length: 1.75mm(1kg)=330m

Add to cart

SUNLU PETG 10x1kg 1.75mm: High Quality 3D Printer PETG Filament from NSE Imports #26.

SUNLU PETG 10x1kg 1.75mm: High Quality 3D Printer PETG Filament from NSE Imports #2.

Ships from: The UK SUNLU PETG 10x1kg 1.75mm: High Quality 3D Printer PETG Filament £87.95

SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Filament Features: Environmental protection and non-toxic; Bright colour; Low shrinkage; Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion. Good dimensional stability, no cracks or warping. High transparency and good gloss. Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc. Product Parameter: Wire diameter: 1.75mm Tolerance: ±0.02mm Printing temperature: 220-250℃ Bottom plate temperature: need to apply glue when not heating Heating 60-80℃, no glue Rally (KGF): 8-14 Melt index: 6-11g/10min (220℃, 2.16kg) Elongation at break: 210% Printing speed: 50-100mm/s Air bubbles: 100% zero bubbles Net weight: 1KG/roll Gross weight: 1.3KG/roll Length: 1.75mm(1KG)=320M

Add to cart

SUNLU PETG 1kg 3D Printer Filament 1.75mm: Create high quality tough prints from NSE Imports #1.

SUNLU PETG 1kg 3D Printer Filament 1.75mm: Create high quality tough prints from NSE Imports #2.

Ships from: The UK SUNLU PETG 1kg 3D Printer Filament 1.75mm: Create high quality tough prints from £13.95

SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Filament Features: Environmental protection and non-toxic; Bright color; Low shrinkage; Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion. Good dimensional stability, no cracks or warping. High transparency and good gloss. Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc. Product Parameter: Wire diameter: 1.75mm Tolerance: ±0.02MM Printing temperature: 220-250℃ Bottom plate temperature: need to apply glue when not heating Heating 60-80℃, no glue Rally (KGF): 8-14 Melt index: 6-11g/10min (220℃, 2.16kg) Elongation at break: 210% Printing speed: 50-100mm/s Air bubbles: 100% zero bubbles Net weight: 1KG/roll Gross weight: 1.3KG/roll Length: 1.75mm(1kg)=320M

Add to cart

SUNLU PETG 5x1kg: High Quality 3D Printer PETG Filament from NSE Imports #1.

SUNLU PETG 5x1kg: High Quality 3D Printer PETG Filament from NSE Imports #2.

Ships from: The UK SUNLU PETG 5x1kg: High Quality 3D Printer PETG Filament £54.95

SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Filament Features: Environmental protection and non-toxic; Bright color; Low shrinkage; Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion. Good dimensional stability, no cracks or warping. High transparency and good gloss. Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc. Product Parameter: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 220-250℃ Bottom plate temperature: need to apply glue when not heating Heating 60-80℃, no glue Rally (KGF): 8-14 Melt index: 6-11g/10min (220℃, 2.16kg) Elongation at break: 210% Printing speed: 50-100MM/s Air bubbles: 100% zero bubbles Net weight: 1KG/roll Gross weight: 1.3KG/roll Length: 1.75MM(1KG)=320M

Add to cart

SUNLU PETG Triple Pack: 3x1kg: High Quality 3D Printer PETG Filament from NSE Imports #1.

SUNLU PETG Triple Pack: 3x1kg: High Quality 3D Printer PETG Filament from NSE Imports #2.

Ships from: The UK SUNLU PETG Triple Pack: 3x1kg: High Quality 3D Printer PETG Filament £31.95

SUNLU PETG Filament is a high-quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. SUNLU is the mastermind behind their own 3D Printers and Filament, ensuring top-grade material for smooth and hassle-free prints every time. Ready to save some cash? Grab these fantastic triple packs, perfect for bigger and bolder print projects. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Filament Features: Environmental protection and non-toxic; Bright colour; Low shrinkage; Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion. Good dimensional stability, no cracks or warping. High transparency and good gloss. Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc. Product Parameter: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 220-250℃ Bottom plate temperature: need to apply glue when not heating Heating 60-80℃, no glue Rally (KGF): 8-14 Melt index: 6-11g/10min (220℃, 2.16kg) Elongation at break: 210% Printing speed: 50-100MM/s Air bubbles: 100% zero bubbles Net weight: 1KG/roll Gross weight: 1.3KG/roll Length: 1.75MM(1KG)=320M

Add to cart

SUNLU PETG Twin Pack: 2x1kg: High Quality 3D Printer PETG Filament from NSE Imports #1.

SUNLU PETG Twin Pack: 2x1kg: High Quality 3D Printer PETG Filament from NSE Imports #2.

Ships from: The UK SUNLU PETG Twin Pack: 2x1kg: High Quality 3D Printer PETG Filament £25.95

SUNLU PETG Filament is a premium, bubble-free filament suitable for most FDM-style 3D printers. PETG is an excellent choice for printing mechanically stressed parts, as it is more heat resistant, flexible, and less brittle compared to PLA. SUNLU, the creator of their own 3D printers and filament, guarantees top-grade material for smooth and hassle-free prints every time. Looking to save money? These fantastic twin packs are perfect for larger and more ambitious print projects. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PETG Filament Features: Environmental protection and non-toxic; Bright colour; Low shrinkage; Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion. Good dimensional stability, no cracks or warping. High transparency and good gloss. Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc. Product Parameter: Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing temperature: 220-250℃ Bottom plate temperature: need to apply glue when not heating Heating 60-80℃, no glue Rally (KGF): 8-14 Melt index: 6-11g/10min (220℃, 2.16kg) Elongation at break: 210% Printing speed: 50-100MM/s Air bubbles: 100% zero bubbles Net weight: 1KG/roll Gross weight: 1.3KG/roll Length: 1.75MM(1KG)=320M

Add to cart

SUNLU PLA 10x1kg: High Quality 3D Printer PLA Filament from NSE Imports #1.

SUNLU PLA 10x1kg: High Quality 3D Printer PLA Filament from NSE Imports #2.

Ships from: The UK SUNLU PLA 10x1kg: High Quality 3D Printer PLA Filament from £108.95

Get your prints popping with SUNLU PLA Filament - the high quality, bubble-free filaments for FDM style 3D Printers like Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed and more. SUNLU makes their own 3D Printers and Filament, using top-grade materials for effortlessly smooth and hassle-free prints. Save big and snag these bulk packs for all your larger-than-life prints. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. PLA Features: SUNLU PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3D Printer, suitable for printing artworks, crafts, models, light duty tools and prototypes. 100% No bubble fresh 3D Printer filament. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PLA Specifications: PLA Filament Diameter: 1.75mm/3.0mm PLA Diameter Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend print Temperature: 200-230°C Platform temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length：1.75mm(1kg)=330m

Add to cart

Multiple spools of SUNLU 3D printer filament in various colors, including purple, green, yellow, orange, red, gray, and white.

SUNLU PLA 3D Printer Filament: 1.75mm 1kg Many Colours from NSE Imports #2.

Ships from: The UK SUNLU PLA 3D Printer Filament: 1.75mm 1kg Many Colours from £12.95

SUNLU PLA Filament is a high quality bubble free filament. PLA is one of the easiest filaments to work with and great for those just starting out in 3D Printing. Suitable for use in most FDM style 3D Printers from brands such as Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed, and more. SUNLU creates their own 3D Printers and Filament using top-notch materials for hassle-free printing. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PLA Features: PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3d Printer, suitable for printing artworks and crafts. 100% no bubble 3d Printer filament. PLA Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend Print Temperature: 190-220°C Platform Temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length: 1.75mm(1kg)=330m

Add to cart

SUNLU PLA 5x1kg: High Quality PLA Filament for 3D Printers from NSE Imports #1.

SUNLU PLA 5x1kg: High Quality PLA Filament for 3D Printers from NSE Imports #2.

Ships from: The UK SUNLU PLA 5x1kg: High Quality PLA Filament for 3D Printers from £61.95

SUNLU PLA Filament: High quality, no bubbles, perfect for most FDM-style 3D Printers like Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed, and more. SUNLU makes their own 3D Printers and Filament using top-notch materials for problem-free printing. Save cash with these bulk packs, perfect for big-time printmakers! Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. PLA Features: SUNLU PLA filament is eco-friendly, low shrinkage, high strength material. It is compatible with all types of FDM 3D Printer, suitable for printing artworks, crafts, models, light duty tools and prototypes. 100% No bubble fresh 3D Printer filament. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PLA Specifications: PLA Filament Diameter: 1.75mm PLA Diameter Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend print Temperature: 200-230°C Platform temperature: 80-120°C Melting point: 165-180°C Melt index: 7-9g/10min Elongation at break: 4% Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length：1.75mm(1kg)=330m approx.

Add to cart

21 22 23 24 25

Friendly Service

Excellent service with a friendly touch.

Free Tracked Delivery to most destinations

Free delivery to UK, EU, US, AU and more.

Low Prices

If we are not the lowest please get in touch.

Latest and Greatest Tech

We are always searching for the latest products

NSE IMPORTS
OFFICE 7
35-37 LUDGATE HILL
LONDON
EC4M 7JN

shop@nseimports.co.uk

07967323318

Links Search Our Site About NSE Imports Contact Us Privacy Policy Your privacy choices Refund Policy Shipping Policy Terms of Service View our Blog Sitemap Klarna Information

Find anything you need

Friendly Service

Free Tracked Delivery to most destinations

Low Prices

Latest and Greatest Tech