ERYONE Matte PLA Filament brings a high quality finish without the shine of regular PLA, Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.

Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.

Features:

• Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable Prints
  Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
• Purest-grade Material | Made in USA | Non Toxic and Limited Smell
  ERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
• Professional Packaging | Vacuumed Sealed
  ERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
• High Compatibility
  Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.

Specifications:

• Filament Diameter: 1.75mm
• Tolerance: ± 0.03mm
• Print Temperature: 190-220°C
• Recommended Print Temperature: 200-215°C
• Heated Bed Temp: 60-70°C
• Recommended Print Speed 30-60mm/s
• Produced mainly from Corn Starch, eco friendly material.
• Net Weight: 1kg (inc spool)
• Gross Weight: 1.3-1.4kg
• Tensile Strength [MPa]: 82-85

FAQ:

• Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
• Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
• Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.