Ships from: The UK
ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints
£25.95
ERYONE Carbon Fiber filament is provide strong yet lightweight prints. Thanks to the infusion of Carbon Fiber into the filament you can create prints with thinner side walls without sacrificing rigidity. Available in both PLA and PETG you can choose the most suitable base material for your required design.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High Compatibility: Compatible with most 3D Printers that support 1.75mm PLA or PETG filament.
NOTE: Requires good ventilation during printing due to the presence of styrene.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature PLA Carbon Fiber: 190-220°C
Print Temperature PETG Carbon Fiber: 220-240°C
Heated Bed Temp: 55-70°C
Fan Speed: None to Minimal
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Ships from: The UK
JAYO PLA CARBON FIBRE 10x1kg 1.75mm: Super Strong High Quality 3D Printer Filament
£196.95
JAYO PLA Carbon Fiber Filament is a high-quality, bubble-free filament that is compatible with most FDM 3D printers. It's an excellent choice for 3D printing projects requiring enhanced strength, stiffness, and heat resistance.
By incorporating carbon fiber into the filament, PLA Carbon Fiber offers several advantages over standard PLA. The addition of carbon fiber significantly improves the strength and stiffness of the printed parts, making them ideal for structural components and tools. Moreover, PLA Carbon Fiber can withstand higher temperatures than regular PLA, making it suitable for applications that involve exposure to heat. The carbon fiber reinforcement reduces thermal expansion and contraction, resulting in more precise and dimensionally stable prints. Additionally, PLA Carbon Fiber often produces smoother and more detailed prints, thanks to the carbon fibers' ability to fill in gaps between layers. With its exceptional properties, JAYO PLA Carbon Fiber Filament is a popular choice for both hobbyists and professionals seeking to create strong, durable, and high-performance 3D printed parts.
Click here to search for more great filament by JAYO.
Click here to search for more great filament by JAYO.
Benefits of PLA Carbon Fibre Filament:
Increased Strength and Stiffness: The addition of carbon fiber significantly improves the strength and stiffness of the printed parts, making them ideal for structural components and tools.
Improved Heat Resistance: PLA Carbon Fiber can withstand higher temperatures than regular PLA, making it suitable for applications that involve exposure to heat.
Enhanced Dimensional Stability: The carbon fiber reinforcement reduces thermal expansion and contraction, resulting in more precise and dimensionally stable prints.
Better Surface Finish: PLA Carbon Fiber often produces smoother and more detailed prints, thanks to the carbon fibers' ability to fill in gaps between layers.
Specifications:
Wire diameter: 1.75mm
Tolerance: ±0.02mm
Printing temperature: 200-230℃
Bottom plate temperature: 50-65℃ No glue required. Glue required if not using a heated bed.
Rally (KGF): 11-14
Melt index: 11-16g/10min (220℃, 2.16kg)
Elongation at break: 4%
Printing speed: 50-100mm/s
Air bubbles: 100% zero bubbles
Net weight: 1kg/roll approx.
Gross weight: 1.3kg/roll approx.
Length: 1.75mm(1KG)=320m approx.
Ships from: The UK
SUNLU Carbon Fiber PLA Filament Twin Pack: 2*1kg Create Extremely Rigid Prints
£42.95
Choose Sunlu PLA Carbon Fiber Filament to Create Ultra-Sturdy Prints! This special blend of PLA and carbon fiber particles creates a one-of-a-kind speckled look and supercharges your prints with up to 5x the strength and 3x the resilience. Perfect for tough, durable parts that can handle any challenge! These twin packs help you print more for less.
You'll need to crank up the heat to 215-225°C, but trust us, it's worth it. And watch out for its abrasive nature - we recommend a hardened steel nozzle to keep your printer in tip-top shape.
Click here to search for more great filament by SUNLU.
Click here to search for more great filament by SUNLU.
Important Information About The Packaging:
SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
Product Parameter:
Diameter: 1.75mm
Tolerance: +/-0.02mm
Print speed: 50-100mm/s
Color: Black
Recommend Print Temperature: 200-230℃
Heated Bed Temperature: 60-80℃
Melt index: 11-16g/10min
Elongation at break: 3%
Net weight: 1kg with spool
Gross weight: 1.3kg
Length:330m approx.
Ships from: The UK
SUNLU PLA Carbon Fiber Filament: 1kg Create Extremely Rigid Prints
£25.95
£28.95
Choose Sunlu PLA Carbon Fiber Filament to Create Ultra-Sturdy Prints! This special blend of PLA and carbon fiber particles creates a one-of-a-kind speckled look and supercharges your prints with up to 5x the strength and 3x the resilience. Perfect for tough, durable parts that can handle any challenge!
You'll need to crank up the heat to 215-225°C, but trust us, it's worth it. And watch out for its abrasive nature - we recommend a hardened steel nozzle to keep your printer in tip-top shape.
Click here to search for more great filament by SUNLU.
Click here to search for more great filament by SUNLU.
Important Information About The Packaging:
SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
Product Parameter:
Diameter: 1.75mm
Tolerance: +/-0.02mm
Print speed: 50-100mm/s
Color: Black
Recommend Print Temperature: 200-230℃
Heated Bed Temperature: 60-80℃
Melt index: 11-16g/10min
Elongation at break: 3%
Net weight: 1kg with spool
Gross weight: 1.3kg
Length:330m approx.