PLA 3D Printer Filament

ERYONE PLA Filament is a top-notch 3D printing material, crafted from high-quality virgin plastic and vibrant colours. Our vacuum packaging ensures optimal freshness, while our tangle-free winding and tight tolerance control guarantee smooth, reliable prints. Committed to sustainability, ERYONE filament now comes on fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]:  6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Flashforge PLA Filament is a high quality filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Flashforge filament, firmly follows the ISO 9001 quality standards and lean production requirements to ensure each roll of 3D filament produces great results. Features: Environmentally friendly: Flashforge PLA filament 1.75mm is drilled from corn grain, has no odour omitted in use, and passes the EU RoHS certification. Flashforge filament PLA 1.75 is suitable for teenagers and children to use at home or school, harmless to the human body. High precision: The wire diameter of Flashforge PLA filaments is strictly controlled, with deviation less than 0.05mm. Effectively improving 3D printing effects. Strong compatibility: Flashforge best PLA materials are applicable to mainstream FDM 3D printers on the market. Good fluidity after melting: Greatly reducing problems of nozzle plug High strength: Flashforge PLA filaments ensure high hardness of the printed models. Wear resistant and durable in use. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 60-90mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Tensile Strength: ≥60 MPa Elongation at Break: ≥3 % Flexural Strength: ≥60 MPa Flexural Modulus: ≥2500 MPa IZOD Impact Strength: ≥16 J/m Layer Thickness: 0.1-0.2 mm Heat Deflection Temperature: ≥55 °C FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE Dual Colour PLA Filament is ideal for creating eye catching prints. With a range of colour choices, these print similar to Rainbow filaments but with just two mixed colours. Available in Regular, Matte and Silk options. The 4x mixed spool options contain the following: 4x 250g Matte Dual: Yellow/Purple, Blue/Purple, Green/Purple, Blue/Yellow 4x 250g Silk Dual (A): Blue/Green, Red/Green, Red/Blue, Purple/Gold 4x 250g Silk Dual (B): Gold/Bronze, Gold/Silver, Red/Gold, Yellow/Green Made from high quality virgin plastic, with strong colours and supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. This is a great filament for making props and cosplay items. No need to try and coat an item with glitter after printing, the glitter finish runs through your print as well, meaning the odd scuff won't leave bald patches. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Consistent Feeding and Stable Prints:Minimum tolerance and low warping are essential for consistent feeding and stable prints. They prevent clogging and contribute to a high success rate, yielding parts with an excellent surface finish and high precision. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are manufactured in the USA using virgin materials. They are biodegradable, eco-friendly, and safe for both users and the environment, making them perfect for indoor printing. Professional Packaging | Vacuumed SealedERYONE filament is provided in a sealed vacuum bag, accompanied by a desiccant to ensure it remains dry, free from dust and foreign particles, thus preventing nozzle jams and ensuring the production of smooth 3D models. High CompatibilityERYONE filament is compatible with 3D printers and 3D pens that utilize 1.75mm filament, including brands like Prusa, Makerbot, and others. It has been tested across a range of 3D printers and has received positive feedback from customers. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]:  6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging can occur due to an uneven wire diameter or a temperature that is too low. To reduce the likelihood of clogging, clean the nozzle prior to use and increase the temperature. Stringing: Wire stringing can occur if the temperature is excessively high, the PLA flow is too rapid, or the feed parameters are incorrectly set. Adjusting the temperature and speed settings appropriately can resolve these issues. Over Extrusion: Excessive extrusion at the nozzle outlet, resulting in residual material, can be caused by a temperature that is too high, a speed that is too slow, or a mismatch in the nozzle diameter.