UK Warehouse

ERYONE PLA Filament is a premium 3D printing material, made from high-quality virgin plastic and available in a vibrant range of colours. Their vacuum-sealed packaging keeps the filament fresh, while our tangle-free winding and precise tolerances ensure smooth, reliable prints every time. And now, their filament comes on eco-friendly, fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]:  6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

SUNLU PLA Filament is a high quality bubble free filament. PLA is one of the easiest filaments to work with and great for those just starting out in 3D Printing. Suitable for use in most FDM style 3D Printers from brands such as Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed, and more. SUNLU creates their own 3D Printers and Filament using top-notch materials for hassle-free printing. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PLA Features: PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3d Printer, suitable for printing artworks and crafts. 100% no bubble 3d Printer filament. PLA Specifications: Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend Print Temperature: 190-220°C Platform Temperature: 80-120°C Net weight: 1kg with spool Gross weight: 1.35kg PLA Filament Length: 1.75mm(1kg)=330m

SUNLU PLA+ Filament is a high quality bubble free filaments, suitable for use in most FDM style 3D Printers such as Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed and more. SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers. Click here to search for more great filament by SUNLU. Click here to search for more great filament by SUNLU. PLA+ Features: PLA+ is a more durable form of traditional PLA, it can give strength similar to PETG or ABS but with the ease of PLA printing techniques. Ideal for applications where you need a more durable print but not necessarily the heat or acid resistant properties of PETG or ABS. Important Information About The Packaging: SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use. PLA+ Specifications: Model: PLA PLUS (PLA+) Diameter Format: 1.75mm Print Temp.: 210-235°C Tolerance: ±0.02mm Print Speed： 50-100mm/s Platform Temp： Depends on the platform: No need or 60-80℃ Net Weight: 1kg Gross Weight: 1.3kg Packing Size: 209*209*73mm Length: 330m Tensile Strength: 11-15kgf Melt Flow Rate: 9-11g/10 min(190℃,2.16kg) Certificate: RoHS, Reach

ERYONE PLA PLUs (PLA+) Filament is a high quality PLA Filament, based on their already outstanding PLA filament, ERYONE PLA PLUS improves the strength of the print over regular PLA to similar levels as PETG, but keeps the ease of printing that regular PLA brings. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]:  6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE Dual Colour PLA Filament is ideal for creating eye catching prints. With a range of colour choices, these print similar to Rainbow filaments but with just two mixed colours. Available in Regular, Matte and Silk options. The 4x mixed spool options contain the following: 4x 250g Matte Dual: Yellow/Purple, Blue/Purple, Green/Purple, Blue/Yellow 4x 250g Silk Dual (A): Blue/Green, Red/Green, Red/Blue, Purple/Gold 4x 250g Silk Dual (B): Gold/Bronze, Gold/Silver, Red/Gold, Yellow/Green Made from high quality virgin plastic, with strong colours and supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. This is a great filament for making props and cosplay items. No need to try and coat an item with glitter after printing, the glitter finish runs through your print as well, meaning the odd scuff won't leave bald patches. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Consistent Feeding and Stable Prints:Minimum tolerance and low warping are essential for consistent feeding and stable prints. They prevent clogging and contribute to a high success rate, yielding parts with an excellent surface finish and high precision. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are manufactured in the USA using virgin materials. They are biodegradable, eco-friendly, and safe for both users and the environment, making them perfect for indoor printing. Professional Packaging | Vacuumed SealedERYONE filament is provided in a sealed vacuum bag, accompanied by a desiccant to ensure it remains dry, free from dust and foreign particles, thus preventing nozzle jams and ensuring the production of smooth 3D models. High CompatibilityERYONE filament is compatible with 3D printers and 3D pens that utilize 1.75mm filament, including brands like Prusa, Makerbot, and others. It has been tested across a range of 3D printers and has received positive feedback from customers. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]:  6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging can occur due to an uneven wire diameter or a temperature that is too low. To reduce the likelihood of clogging, clean the nozzle prior to use and increase the temperature. Stringing: Wire stringing can occur if the temperature is excessively high, the PLA flow is too rapid, or the feed parameters are incorrectly set. Adjusting the temperature and speed settings appropriately can resolve these issues. Over Extrusion: Excessive extrusion at the nozzle outlet, resulting in residual material, can be caused by a temperature that is too high, a speed that is too slow, or a mismatch in the nozzle diameter.

ERYONE Ultra Silk PLA Filament is a high quality PLA Filament, ideal for making parts and models with a high gloss shine. It produces models with a very high gloss metal surface and strong metal texture, brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.  Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Ultra Silk Texture: Extremely fine and smooth on the print surface. Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: High Gloss Shine Silk Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx) Net Weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top

Protect yourself with these excellent Bang Wei Dun KN95 rated masks (equivalent to N95/FFP2, see images for details). Hygienically sealed packs of 10 masks ensure they arrive safely and free of contaminants. Most commonly used for Flu, Influenza, Swine Flu and Avian Flu prevention, the CDC consider N95 masks help to prevent the spreading and transmission of viruses from person to person. N95 masks are designed to fit over the nose and mouth of the wearer, and properly fitted can provide excellent protection. Ideal for use in conditions where Social Distancing may not be possible, these include shops, transport and healthcare situations.Read more on our Respirator Advice and Information Page.Please be aware: For hygiene reasons once the packet has been opened we cannot accept returns on this item. Features: N95/KN95 Rated Respirator facemask, equivalent to FFP2 rating. Wrapped in pairs of masks, keep a spare pair handy. Adjustable nose bridge for a secure fit. Can help you prevent spreading any germs you may have. Removes 95% of all dust or particles that are at least 0.3 microns in diameter. High quality 4 layer design, easy to breath through while offering protection. No staples or exposed metal parts. Bonded straps ensure the mask will stay secure. Manufactured February 2020 (See images for test reports). Supplied in packs of 10. Usage Advice: For male wearers, please ensure your are clean shaven. Beards or long stubble can prevent the mask sealing to your face. Ensure Nose Bridge is adjusted to seal against your face. Avoid touching the mask once it’s secured on your face, as it might have germs on it Avoid dangling the mask from one ear or hanging the mask around your neck as a chin warmer. Ensure both mouth and nose are covered, an exposed nose defeats the protection benefits of a mask. Removal Advice: Before you take off the mask, wash your hands. Avoid touching the mask itself, as it could be contaminated. Hold it by the loops only. Carefully remove the mask from your face once you unhook both ear loops. Holding the mask loops, discard the mask in a covered rubbish bin. If you are not near a bin, place inside a bag you can seal or tie shut. After removing the mask, wash your hands thoroughly once more.

Keep your valuables safe with our dependable, unbreakable steel safe. This multi-purpose safe provides an easy and sturdy solution for storing important papers, precious gems, cash money, and other precious possessions. Key Features: Robust Construction: Built with 2mm thick solid steel and a 4mm thick door, ensuring maximum security. Flexible Access: Choose between a 3-8 digit digital PIN code or two override keys for easy access. Enhanced Security: Time-out function after 3 incorrect attempts and tamper-proof hinges for added protection. Easy Installation: Simple surface mounting with pre-drilled holes and included bolts. Versatile Storage: Ideal for home, office, or travel, this compact safe can be mounted to a wall, floor, or cabinet. Soft Interior: Velvet cushion protects your valuables from scratches and damage. Specifications: Material: Solid Steel Size: 4.6L 170*230*170 mm Colour: Black/Grey/White Constructed with 2mm Thick Solid Steel and 4mm Thick Front Door for More Security Pre-drilled holes and anchoring bolts included Tamper-proof hinges Requires 4 x AA-Size 1.5v Batteries Upgrade your security today with our durable and user-friendly steel safe.

ERYONE Silk PLA Filament is a high quality PLA Filament, ideal for making parts and models with a high gloss shine. It produces models with a very high gloss finish, brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.  Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Silk Texture: Extremely fine and smooth on the print surface. Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: Gloss Silk Tolerance: ± 0.03mm Print Temperature: 195-215°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx) Net Weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Geeetech Glow In The Dark 3D Printer Filament is ideal for making Halloween Props, Nightlight and much more. Once printed, let the part sit in the light for a few hours and when placed in the dark it will glow. The glow can be charged from Lightbulb, Sunlight or UV light, best and brightest results come from UV, then Sunlight, then Bulbs. Suitable for for printing with most FDM style 3D Printers with a heated bed. Specifications: Filament diameter : 1.75mm ±0.3mm Print Temperature Range 190 - 230°C Recommended Print Temperature: 220°C Printer Bed Temperature: 50 - 70°C Material: PLA Colour: Luminous Green, Orange, White, Blue, Yellow, Purple, Rainbow, Rose Red Net Weight: 1kg Gross Weight:1.4kg

Bring the warmth of wood to your 3D prints with Eryone Wood PLA filament. This filament combines PLA with wood fibres, creating a unique material with a wood-like texture and finish. Available in light and deep wood tones, your prints will look stunning. Great for sculptures, cosplay and model making. Features: Wood-Like Texture: Has a great wood-like texture, made with wood fibre. High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm. No Tangling: Perfect winded filament PLA, 100% tangle-free before unopened, neatly rolled, no curling or warping. High Compatibility: Universal compatibility with diverse 99% common-used FDM 3D printers in market. Vacuumed Sealed Packaging: The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust. Specifications: Filament Diameter: 1.75mm Finish: Wood Tolerance: ± 0.03mm Print Temperature: 200-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx.) Net weight: 1kg (approx.) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.