Ships from: The UK
ERYONE PETG Filament 1kg 1.75mm: Various Colours For FDM 3D Printers
£13.95
ERYONE PETG Filament is a high quality PETG Filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Higher strength and toughness than PLA
The adhesion between layers is stronger than that of PLA
Uniform wire diameter, smooth discharge and smooth surface
Very good winding: Make the model looks shiny, no risk that the filament is entangled
Very widely using: Acid and alkali resistance, can used in many applications
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 230-250°C
Heated Bed Temp: 55-70°C
Recommended Print Speed 30-60mm/s
Specific Gravity [g/cm3]: 1.27
Elongation at Yield [%]: 3.2
Tensile Strength [MPa]: 61
Moisture absorption – 1 day [%]: 0.13
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Ships from: The UK
SUNLU PETG 5x1kg: High Quality 3D Printer PETG Filament
from £49.95
SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle.
SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers.
Click here to search for more great filament by SUNLU.
Click here to search for more great filament by SUNLU.
Important Information About The Packaging:
SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PETG Filament Features:
Environmental protection and non-toxic;
Bright color;
Low shrinkage;
Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion.
Good dimensional stability, no cracks or warping.
High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc.
Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=320M
Ships from: The UK
SUNLU PETG 1kg 3D Printer Filament 1.75mm: Create high quality tough prints
from £14.95
SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle.
SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers.
Click here to search for more great filament by SUNLU.
Click here to search for more great filament by SUNLU.
Important Information About The Packaging:
SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PETG Filament Features:
Environmental protection and non-toxic;
Bright color;
Low shrinkage;
Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion.
Good dimensional stability, no cracks or warping.
High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc.
Product Parameter:
Wire diameter: 1.75mm
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100mm/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75mm(1kg)=320M
Ships from: The UK
SUNLU PETG Triple Pack: 3x1kg: High Quality 3D Printer PETG Filament
£30.95
SUNLU PETG Filament is a high-quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle.
SUNLU is the mastermind behind their own 3D Printers and Filament, ensuring top-grade material for smooth and hassle-free prints every time. Ready to save some cash? Grab these fantastic triple packs, perfect for bigger and bolder print projects.
Click here to search for more great filament by SUNLU.
Click here to search for more great filament by SUNLU.
Important Information About The Packaging:
SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PETG Filament Features:
Environmental protection and non-toxic;
Bright colour;
Low shrinkage;
Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion.
Good dimensional stability, no cracks or warping.
High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc.
Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=320M
Ships from: The UK
ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints
£25.95
ERYONE Carbon Fiber filament is provide strong yet lightweight prints. Thanks to the infusion of Carbon Fiber into the filament you can create prints with thinner side walls without sacrificing rigidity. Available in both PLA and PETG you can choose the most suitable base material for your required design.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High Compatibility: Compatible with most 3D Printers that support 1.75mm PLA or PETG filament.
NOTE: Requires good ventilation during printing due to the presence of styrene.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature PLA Carbon Fiber: 190-220°C
Print Temperature PETG Carbon Fiber: 220-240°C
Heated Bed Temp: 55-70°C
Fan Speed: None to Minimal
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Ships from: The UK
SUNLU PETG 10x1kg 1.75mm: High Quality 3D Printer PETG Filament
£114.95
SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle.
SUNLU are producers of their own 3D Printers and Filament, their filament is made from the best grade material to ensure smooth and issue free prints every time., their filament is made from the best grade material to ensure smooth and issue free prints every time. Save money and buy in these great value bulk packs. Ideal for larger scale print producers.
Click here to search for more great filament by SUNLU.
Click here to search for more great filament by SUNLU.
Important Information About The Packaging:
SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PETG Filament Features:
Environmental protection and non-toxic;
Bright colour;
Low shrinkage;
Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion.
Good dimensional stability, no cracks or warping.
High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc.
Product Parameter:
Wire diameter: 1.75mm
Tolerance: ±0.02mm
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100mm/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75mm(1KG)=320M
Ships from: The UK
JAYO PETG 10x1.1kg 1.75mm: 11kg for the price of 10kg High Quality 3D Printer PETG Filament
from £81.95
JAYO PETG Filament is a high-quality, bubble-free filament that is compatible with most FDM 3D printers. It is an outstanding material for printing parts that are subject to mechanical stress. PETG offers greater heat resistance, flexibility, and durability compared to PLA.
Click here to search for more great filament by JAYO.
Click here to search for more great filament by JAYO.
Benefits of PETG Filament:
Heat Resistance: PETG can withstand higher temperatures, making it suitable for applications requiring heat resistance.
Flexibility: It offers greater flexibility than PLA, allowing for more intricate and durable prints.
Impact Resistance: PETG is more resistant to impact, making it less prone to breakage.
Adhesion: It exhibits good layer adhesion, resulting in smooth and strong prints.
Versatility: PETG is suitable for a wide range of 3D printing applications, from functional parts to prototypes.
Specifications:
Wire diameter: 1.75mm
Tolerance: ±0.02mm
Printing temperature: 220-250℃
Bottom plate temperature: 60-80℃, no glue if heating, glue required if using a cold plate.
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100mm/s
Air bubbles: 100% zero bubbles
Net weight: 1.1kg/roll approx.
Gross weight: 1.3kg/roll approx.
Length: 1.75mm(1KG)=320m approx.
Ships from: The UK
KEEPANG PETG Filament: Various Colours For FDM 3D Printers
£13.95
KEEPANG PETG Filament is a premier choice for FDM 3D printers, providing a wide range of bold colours. Each filament is carefully packaged in a vacuum-sealed container to ensure maximum freshness. With a specialized winding process and precise tolerances, this filament delivers consistently flawless prints.
Compatible with popular 3D printers like:
Creality 3D
Artillery
SUNLU
Geeetech
Kingroon
Eaythreed
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 230-250°C
Recommended Print Speed 30-100mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc. spool)
Gross Weight: 1.3-1.4kg
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PETG is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Ships from: The UK
SUNLU PETG 20x1kg: High Quality 3D Printer PETG Filament
£227.95
£228.95
SUNLU PETG Filament is a high quality bubble free filament suitable for use in most FDM style 3D Printers. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle.Made to SUNLU's excellent quality, with zero bubbles, it's ideal for FDM-style 3D Printers such as Creality, Artillery, Geeetech, Sunlu, Prusia, Easythreed, and more. SUNLU creates their own 3D Printers and Filament using top-notch materials for hassle-free printing. Save money with these large packages, perfect for serious printers!
Click here to search for more great filament by SUNLU.
Click here to search for more great filament by SUNLU.
PETG Features:
Environmental protection and non-toxic
Bright color
Low shrinkage
Good toughness, not brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion
Good dimensional stability, no cracks or warping
High transparency and good gloss
Suitable for all types of FDM3D printers, suitable to print all kinds of commonly used models, crafts, industry pieces, advertising words, etc...
Important Information About The Packaging:
SUNLU regularly update their filament packaging, we will send whichever we have in stock at the time of ordering. Please see the image below for the box styles they use.
PETG Specifications:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=320M