Products

ERYONE ASA 1.75mm 3D Printing Filament 1kg UV Resistant Superior to ABS Ideal For Hard Wearing Prints And Outdoor Prints from NSE Imports #1.

ERYONE ASA 1.75mm 3D Printing Filament 1kg UV Resistant Superior to ABS Ideal For Hard Wearing Prints And Outdoor Prints from NSE Imports #2.

Ships from: The UK ERYONE ASA 1.75mm 1kg 3D Printing Filament: UV Resistant Superior to ABS Ideal For Hard Wearing Prints And Outdoor Prints £26.95

ERYONE ASA (Acrylonitrile styrene acrylate) filament is a new material designed to give UV Resistant prints with similar strengths and quality to ABS. Providing superior heat and chemical resistance to ABS it's great for parts for used in outdoor, automotive and hostile environments. While easy to print and less prone to warping than ABS, care should be taken not to overcool the print for best results. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with most 3D Printers that support 1.75mm ABS filament. NOTE: Requires good ventilation during printing due to the presence of styrene. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 230-260°C Heated Bed Temp: 90-110°C Fan Speed: None to Minimal Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg FAQ: Clogging: Clogging can occur due to an uneven wire diameter or a temperature that is too low. To reduce the likelihood of clogging, clean the nozzle before use and increase the temperature. Stringing: Stringing can occur if the temperature is excessively high, the filament flow is too rapid, or the feed parameters are incorrectly set. Adjusting the temperature and speed settings appropriately can resolve these issues. Over Extrusion: Excessive temperature, slow extrusion speed, or a mismatched nozzle diameter can lead to over-extrusion at the nozzle outlet, resulting in residual material.

Add to cart

ERYONE Dual Colour 1kg 1.75mm PLA 3D Printer Filament Regular, Matte and Silk Colours Create Great Two Tone Prints from NSE Imports #1.

ERYONE Dual Colour 1kg 1.75mm PLA 3D Printer Filament Regular, Matte and Silk Colours Create Great Two Tone Prints from NSE Imports #2.

Ships from: The UK ERYONE Dual Colour 1kg 1.75mm PLA 3D Printer Filament Regular, Matte and Silk Colours Create Great Two Tone Prints from £24.95

ERYONE 1.75mm Dual-Colour Co-Extruded PLA Filament (1kg / 4x250g Spools) Create striking, color-shifting 3D prints without the hassle of multi-material upgrades! ERYONE Dual-Colour PLA Filament features two distinct shades extruded side-by-side along the same strand, producing an eye-catching dynamic shimmer that changes as you view the object from different angles. Perfect for cosplay items, props, display models, and decorative art. Available Finish Options & Colour Packs 4× 250g Matte Dual-Pack: Yellow/Purple, Blue/Purple, Green/Purple, Blue/Yellow 4× 250g Silk Dual-Pack (Set A): Blue/Green, Red/Green, Red/Blue, Purple/Gold 4× 250g Silk Dual-Pack (Set B): Gold/Bronze, Gold/Silver, Red/Gold, Yellow/Green 1kg Single Spools: Available in Regular, Matte, and High-Gloss Silk finishes. Key Features Dual-Colour Co-Extrusion: Two mixed colours running continuously along the filament strand create dramatic color shifts across every print layer. Ultra-Tight Tolerance (±0.03mm): Precision engineered to prevent clogs, heat creep, and feeding issues, ensuring smooth surface finishes and high-precision detail. High-Quality PLA Material: Produced from high-grade raw materials for low odour printing, minimal warping, and excellent layer adhesion. Vacuum Sealed Freshness: Ships in heavy-duty vacuum bags with desiccant packets to prevent moisture absorption, stringing, and popping during extrusion. Universal FDM Compatibility: Designed for 1.75mm FDM 3D printers and 3D pens, including Bambu Lab, Creality, Prusa, Anycubic, Elegoo, Artillery, SUNLU, Geeetech, and more. Recommended Print Settings Filament Diameter: 1.75mm (±0.03mm) Printing Temperature: 190°C – 220°C (Recommended: 210°C – 220°C) Heated Bed Temperature: 55°C – 70°C Printing Speed: 30 – 60 mm/s Melting Temperature: 155°C ± 5°C Material Properties Density / Specific Gravity: 1.24 g/cm³ MFR (Melt Flow Rate): 6 g/10min Tensile Strength: 61 MPa Elongation at Yield: 3.2% Package Contents 1 × ERYONE 1.75mm Dual-Colour PLA Filament (1kg Spool or 4×250g Spool Pack, as selected) 1 × Vacuum-Sealed Storage Bag with Desiccant Packet

Add to cart

ERYONE Luminous PLA Filament 1.75mm 1kg Glow in the Dark Green 3D Printer Filament Ideal for Halloween from NSE Imports #1.

ERYONE Luminous PLA Filament 1.75mm 1kg Glow in the Dark Green 3D Printer Filament Ideal for Halloween from NSE Imports #2.

Ships from: The UK ERYONE Luminous PLA Filament 1.75mm 1kg Glow in the Dark Green 3D Printer Filament Ideal for Halloween from £18.95

ERYONE Luminous PLA Filament is a high quality Glow in the dark PLA Filament that's great for creating Halloween model and props, prints and parts. Great for sculptures, cosplay and model making. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Easythreed and more. Features: Contains noctilucent power, Charge from Sunlight, Incandescent lamp, Ultraviolet light. Make awesome Glow in the dark prints. High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm. No Tangling: Perfect winded filament PLA, 100% tangle-free before unopened, neatly rolled, no curling or warping. High Compatibility: Universal compatibility with diverse 99% common-used FDM 3D printers in market. Vacuumed Sealed Packaging: The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust. Eco-friendly: Made from Corn Starch and PLA, fully recyclable. Specifications: Filament Diameter: 1.75mm Finish: Glow in the Dark Green Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 200-220°C Heated Bed Temp: 55-70°C Recommended Print Speed 30-60mm/s In order to avoid corrosion, higher hardness steel nozzles are recommended. Gross weight: 1.35kg (approx) Net weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

ERYONE Matte PLA Filament: 1kg 1.75mm 3D Printer Filament from NSE Imports #1.

ERYONE Matte PLA Filament: 1kg 1.75mm 3D Printer Filament from NSE Imports #2.

Ships from: The UK ERYONE Matte PLA Filament: 1kg 1.75mm 3D Printer Filament from £21.95

ERYONE Matte PLA Filament brings a high quality finish without the shine of regular PLA, Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 200-215°C Heated Bed Temp: 60-70°C Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Tensile Strength [MPa]: 82-85 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

ERYONE PETG Filament 1kg 1.75mm: Various Colours For FDM 3D Printers from NSE Imports #1.

ERYONE PETG Filament 1kg 1.75mm: Various Colours For FDM 3D Printers from NSE Imports #2.

Ships from: The UK ERYONE PETG Filament 1kg 1.75mm: Various Colours For FDM 3D Printers £20.95

ERYONE PETG Filament is a high quality PETG Filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. PETG is an excellent choice for printing mechanically stressed parts. Compared to PLA, it is more heat resistant, more flexible and less brittle. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Higher strength and toughness than PLA The adhesion between layers is stronger than that of PLA Uniform wire diameter, smooth discharge and smooth surface Very good winding: Make the model looks shiny, no risk that the filament is entangled Very widely using: Acid and alkali resistance, can used in many applications Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 230-250°C Heated Bed Temp: 55-70°C Recommended Print Speed 30-60mm/s Specific Gravity [g/cm3]: 1.27 Elongation at Yield [%]: 3.2 Tensile Strength [MPa]: 61 Moisture absorption – 1 day [%]: 0.13 Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints from NSE Imports #1.

ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints from NSE Imports #2.

Ships from: The UK ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints £28.95

ERYONE Carbon Fiber filament is provide strong yet lightweight prints. Thanks to the infusion of Carbon Fiber into the filament you can create prints with thinner side walls without sacrificing rigidity. Available in both PLA and PETG you can choose the most suitable base material for your required design. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with most 3D Printers that support 1.75mm PLA or PETG filament. NOTE: Requires good ventilation during printing due to the presence of styrene. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature PLA Carbon Fiber: 190-220°C Print Temperature PETG Carbon Fiber: 220-240°C Heated Bed Temp: 55-70°C Fan Speed: None to Minimal Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

Sold out

ERYONE PLA Filament: Various Colors For FDM 3D Printers from NSE Imports #1.

ERYONE PLA Filament: Various Colors For FDM 3D Printers from NSE Imports #2.

Ships from: The UK ERYONE PLA Filament: Various Colors For FDM 3D Printers £17.95

ERYONE PLA Filament is a premium 3D printing material, made from high-quality virgin plastic and available in a vibrant range of colours. Their vacuum-sealed packaging keeps the filament fresh, while our tangle-free winding and precise tolerances ensure smooth, reliable prints every time. And now, their filament comes on eco-friendly, fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE PLA Plus Filament: Stronger than regular PLA with brighter colours from NSE Imports #1.

ERYONE PLA Plus Filament: Stronger than regular PLA with brighter colours from NSE Imports #2.

Ships from: The UK ERYONE PLA Plus Filament: Stronger than regular PLA with brighter colours £19.95

ERYONE PLA PLUs (PLA+) Filament is a high quality PLA Filament, based on their already outstanding PLA filament, ERYONE PLA PLUS improves the strength of the print over regular PLA to similar levels as PETG, but keeps the ease of printing that regular PLA brings. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

ERYONE Silk PLA Filament 1KG Silk 2.2LBS 1.75mm 3D Printer Filament for FDM Printers Glossy Rich Colours from NSE Imports #1.

ERYONE Silk PLA Filament 1KG Silk 2.2LBS 1.75mm 3D Printer Filament for FDM Printers Glossy Rich Colours from NSE Imports #2.

Ships from: The UK ERYONE Silk PLA Filament 1KG Silk 2.2LBS 1.75mm 3D Printer Filament for FDM Printers Glossy Rich Colours £38.95

ERYONE Silk PLA Filament is a high quality PLA Filament, ideal for making parts and models with a high gloss shine. It produces models with a very high gloss finish, brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Silk Texture: Extremely fine and smooth on the print surface. Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: Gloss Silk Tolerance: ± 0.03mm Print Temperature: 195-215°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx) Net Weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models from NSE Imports #1.

ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models from NSE Imports #2.

Ships from: The UK ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models from £17.95

ERYONE TPU Filament is a high quality TPU Filament, excellent for making bendy models. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 15-30mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 0.5kg / 500g (inc spool) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

Sold out

Spool ofSea Glass Rainbow Aurora Rainbow 3D printing filament with a green spool holder on a white background

Spool of ERYONE Aurora Rainbow 3D printing filament with a green spool holder on a white background

Ships from: The UK ERYONE TPU Rainbow Flexible Filament 0.5kg 500g 1.75mm ±0.05mm for FDM 3D Printer Make Multi Colour Bendy Models £19.95

ERYONE Rainbow TPU Filament is excellent for making bright, multi coloured bendy models. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers that use 1.75MM filament, Such as: Prusa, Makerbot, etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 15-30mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 0.5kg / 500g (inc spool) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Sold out

ERYONE Triple Pack 3x0.5kg PLA Silk Filament 1.75mm 3D Printer Filament Gold Silver Copper Rainbow 3x500g from NSE Imports #1.

ERYONE Triple Pack 3x0.5kg PLA Silk Filament 1.75mm 3D Printer Filament Gold Silver Copper Rainbow 3x500g from NSE Imports #2.

Ships from: The UK ERYONE Triple Pack 3x0.5kg PLA Silk Filament 1.75mm 3D Printer Filament Gold Silver Copper Rainbow 3x500g £35.95

ERYONE Silk PLA Filament is ideal for making parts and models with a high gloss shine. These triple packs give you 3 great colours to make high gloss prints with, ERYONE Silk PLA is brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Shiny Silk Texture: Extremely fine and smooth on the print surface. Great value mini triple packs Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: High Gloss Shine Silk Tolerance: ± 0.03mm Print Temperature: 195-215°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Colour options: Gold/Silver/Copper or Rainbow/Gold/Copper (500g of each colour) Net Weight: 1.5kg (as 3x500g approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE Ultra Silk PLA 3D Printer Filament 1.75mm 1kg Strong Colours Super High Gloss Finish from NSE Imports #1.

ERYONE Ultra Silk PLA 3D Printer Filament 1.75mm 1kg Strong Colours Super High Gloss Finish from NSE Imports #2.

Ships from: The UK ERYONE Ultra Silk PLA 3D Printer Filament 1.75mm 1kg Strong Colours Super High Gloss Finish £23.95

ERYONE Ultra Silk PLA Filament is a high quality PLA Filament, ideal for making parts and models with a high gloss shine. It produces models with a very high gloss metal surface and strong metal texture, brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Ultra Silk Texture: Extremely fine and smooth on the print surface. Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: High Gloss Shine Silk Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx) Net Weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

Sold out

ERYONE Wood 1kg 1.75mm PLA 3D Printer Filament: Create wood effect prints, great for sculptures and models from NSE Imports #1.

ERYONE Wood 1kg 1.75mm PLA 3D Printer Filament: Create wood effect prints, great for sculptures and models from NSE Imports #2.

Ships from: The UK ERYONE Wood 1kg 1.75mm PLA 3D Printer Filament: Create wood effect prints, great for sculptures and models £20.95

Bring the warmth of wood to your 3D prints with Eryone Wood PLA filament. This filament combines PLA with wood fibres, creating a unique material with a wood-like texture and finish. Available in light and deep wood tones, your prints will look stunning. Great for sculptures, cosplay and model making. Features: Wood-Like Texture: Has a great wood-like texture, made with wood fibre. High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm. No Tangling: Perfect winded filament PLA, 100% tangle-free before unopened, neatly rolled, no curling or warping. High Compatibility: Universal compatibility with diverse 99% common-used FDM 3D printers in market. Vacuumed Sealed Packaging: The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust. Specifications: Filament Diameter: 1.75mm Finish: Wood Tolerance: ± 0.03mm Print Temperature: 200-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx.) Net weight: 1kg (approx.) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

GEEETECH 10x1kg Roll Bulk Pack: 1.75mm PLA Filament Great Value Ideal For All FDM 3D Printers from NSE Imports #1.

GEEETECH 10x1kg Roll Bulk Pack: 1.75mm PLA Filament Great Value Ideal For All FDM 3D Printers from NSE Imports #2.

Ships from: The UK GEEETECH 10x1kg Roll Bulk Pack: 1.75mm PLA Filament Great Value Ideal For All FDM 3D Printers from £99.95

GEEETECH's 10x1kg Roll Bulk Pack of 1.75mm PLA Filament is a premium and versatile choice for 3D printing. Crafted from plant-based materials, this environmentally friendly filament boasts impeccable layer adhesion and dimensional accuracy. With a diverse range of colors, it allows for endless artistic possibilities and is suitable for both novice and experienced users. Perfect for larger printing projects, the bulk pack of 10 rolls offers exceptional value. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional images: Click to view Additional images ×

Add to cart

Sold out

Geeetech 1kg 1.75mm Glow in the dark Green PLA 3D Printer Filament Great for Halloween Night Lights Cosplay from NSE Imports #1.

Geeetech 1kg 1.75mm Glow in the dark Green PLA 3D Printer Filament Great for Halloween Night Lights Cosplay from NSE Imports #2.

Ships from: The UK Geeetech 1kg 1.75mm Glow in the dark Green PLA 3D Printer Filament Great for Halloween Night Lights Cosplay from £17.95

Geeetech Glow In The Dark 3D Printer Filament is ideal for making Halloween Props, Nightlight and much more. Once printed, let the part sit in the light for a few hours and when placed in the dark it will glow. The glow can be charged from Lightbulb, Sunlight or UV light, best and brightest results come from UV, then Sunlight, then Bulbs. Suitable for for printing with most FDM style 3D Printers with a heated bed. Specifications: Filament diameter : 1.75mm ±0.3mm Print Temperature Range 190 - 230°C Recommended Print Temperature: 220°C Printer Bed Temperature: 50 - 70°C Material: PLA Colour: Luminous Green, Orange, White, Blue, Yellow, Purple, Rainbow, Rose Red Net Weight: 1kg Gross Weight:1.4kg

Geeetech PLA 3D Printer Filament 1kg 1.75mm Many Colours inc. Wood, Glow In The Dark, Silk from NSE Imports #1.

Geeetech PLA 3D Printer Filament 1kg 1.75mm Many Colours inc. Wood, Glow In The Dark, Silk from NSE Imports #2.

Ships from: The UK Geeetech PLA 3D Printer Filament 1kg 1.75mm Many Colours inc. Wood, Glow In The Dark, Silk from £13.95

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top

Add to cart

Geeetech PLA 3D Printer Filament: 1kg 1.75mm Many Colours ideal for all FDM 3D Printers from NSE Imports #1.

Geeetech PLA 3D Printer Filament: 1kg 1.75mm Many Colours ideal for all FDM 3D Printers from NSE Imports #2.

Ships from: The UK Geeetech PLA 3D Printer Filament: 1kg 1.75mm Many Colours ideal for all FDM 3D Printers from £15.95

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top

Add to cart

Giant Four-in-a-Row Game: Play the classic game supersized! Great for the garden! from NSE Imports #1.

Giant Four-in-a-Row Game: Play the classic game supersized! Great for the garden! from NSE Imports #2.

Ships from: The UK Giant Four-in-a-Row Game: Play the classic game supersized! Great for the garden! £111.95

Hey game lovers! Get ready to super-size your fun with this awesome Giant 4-in-a-Row Game Set! Turn any party, family gathering, or game night into an unforgettable event. This giant version of the classic connect game brings big fun and excitement. The rules are super simple, so even young children can jump right in and start playing in minutes. Plus, restarting the game is a breeze thanks to the handy pull strips at the bottom! Worried about lugging a giant game around? Don't be! Weighing just 11kg, this set is surprisingly lightweight and designed for easy portability. Take the fun anywhere – the garden, the park, or a friend's house! Built to last and designed with safety in mind, this game set is made from high-quality PE and PP materials. You can count on its durability for years of enjoyment, and the smooth edges ensure everyone plays safely without any scratches. Setting up is a piece of cake! You can assemble or disassemble the entire game in just a few minutes, all by yourself, with no extra tools needed. Keeping it clean is just as easy – a quick wipe with a wet cloth now and then is all it takes. Looking for the perfect gift for kids? You've found it! This Giant 4-in-a-Row game is a fantastic surprise for birthdays or holidays. More than just fun, playing this game helps kids develop important motor skills, hand-eye coordination, and cognitive abilities. Check out these great features: Giant Fun: A larger-than-life version of the classic connection game. Easy to Learn & Play: Simple rules make it suitable for all ages. Quick Restart: Bottom strips allow for fast game resets. Lightweight & Portable: Weighs only 11kg, making it easy to carry and set up anywhere. Durable & Safe: Made from sturdy PE and PP materials with smooth, safe edges. Simple Setup: Easy assembly and disassembly with no tools required. Easy to Clean: Wipes clean with a damp cloth. Great Gift Idea: Perfect for kids, promoting fun and skill development. Specifications: Material: PE + PP Product size: 120 cm x 43 cm x 104 cm (L x W x H) Rings diameter: 14 cm Rings thickness: 4 cm Net weight: 11 kg What's in the box? 1 x Chessboard frame 21 x Red rings 21 x White rings 2 x Supporting feet 2 x Pull strips Get ready to connect and have a blast with this fantastic Giant 4-in-a-Row Game Set!

Add to cart

Sold out

iPad Tablet stand with 360° rotating base: Sturdy adjustable stand for Tablets and Phones from NSE Imports #1.

iPad Tablet stand with 360° rotating base: Sturdy adjustable stand for Tablets and Phones from NSE Imports #2.

Ships from: The UK iPad Tablet stand with 360° rotating base: Sturdy adjustable stand for Tablets and Phones £6.99

Get your hands free while watching your favourite show or playing your top game on your big phone or tablet with these sturdy stands. The base rotates 360°, giving you the flexibility to adjust the screen to your liking, perfect for video calls or following a video while cooking or coding. Features: Easily adjustable and ergonomically designed, this stand allows for a seamless viewing experience for both phones and tablets. Its tall aluminium arms provide a comfortable viewing angle and help improve posture, reducing stress on your neck and back. Sturdy and Steady: Crafted from durable aluminium and features anti-slip pads on the base. The front of the stand is covered in silicone for scratch protection and to prevent your tablet/phone from sliding around. This foldable tablet and phone stand is the ultimate space-saver! It conveniently fits in your pocket, so you can easily take it with you for weekend adventures or while jet-setting. Perfect for on-the-go techies! Specifications: Material: Aluminium Colour: Dark Silver Grey Dimensions: 148*130*36mm (folded) Weight: 310g (approx.) Max device weight: 900g (approx.) Suitable for: iPad, Android Tablet, Galaxy Note, Galaxy Fold, Microsoft Surface

Find anything you need

Friendly Service

Free Tracked Delivery to most destinations

Low Prices

Latest and Greatest Tech