Products

ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints from NSE Imports #1.

ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints from NSE Imports #2.

Ships from: The UK ERYONE PETG or PLA Carbon Fiber Filament: Ideal for Strong Lightweight Prints £22.95

ERYONE Carbon Fiber filament is provide strong yet lightweight prints. Thanks to the infusion of Carbon Fiber into the filament you can create prints with thinner side walls without sacrificing rigidity. Available in both PLA and PETG you can choose the most suitable base material for your required design. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with most 3D Printers that support 1.75mm PLA or PETG filament. NOTE: Requires good ventilation during printing due to the presence of styrene. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature PLA Carbon Fiber: 190-220°C Print Temperature PETG Carbon Fiber: 220-240°C Heated Bed Temp: 55-70°C Fan Speed: None to Minimal Recommended Print Speed 30-60mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE PLA Filament: Various Colors For FDM 3D Printers from NSE Imports #1.

ERYONE PLA Filament: Various Colors For FDM 3D Printers from NSE Imports #2.

Ships from: The UK ERYONE PLA Filament: Various Colors For FDM 3D Printers £17.95

ERYONE PLA Filament is a premium 3D printing material, made from high-quality virgin plastic and available in a vibrant range of colours. Their vacuum-sealed packaging keeps the filament fresh, while our tangle-free winding and precise tolerances ensure smooth, reliable prints every time. And now, their filament comes on eco-friendly, fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

Sold out

ERYONE PLA Plus Filament: Stronger than regular PLA with brighter colours from NSE Imports #1.

ERYONE PLA Plus Filament: Stronger than regular PLA with brighter colours from NSE Imports #2.

Ships from: The UK ERYONE PLA Plus Filament: Stronger than regular PLA with brighter colours £17.95

ERYONE PLA PLUs (PLA+) Filament is a high quality PLA Filament, based on their already outstanding PLA filament, ERYONE PLA PLUS improves the strength of the print over regular PLA to similar levels as PETG, but keeps the ease of printing that regular PLA brings. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Sold out

ERYONE Silk PLA Filament 1KG Silk 2.2LBS 1.75mm 3D Printer Filament for FDM Printers Glossy Rich Colours from NSE Imports #1.

ERYONE Silk PLA Filament 1KG Silk 2.2LBS 1.75mm 3D Printer Filament for FDM Printers Glossy Rich Colours from NSE Imports #2.

Ships from: The UK ERYONE Silk PLA Filament 1KG Silk 2.2LBS 1.75mm 3D Printer Filament for FDM Printers Glossy Rich Colours £35.95

ERYONE Silk PLA Filament is a high quality PLA Filament, ideal for making parts and models with a high gloss shine. It produces models with a very high gloss finish, brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Silk Texture: Extremely fine and smooth on the print surface. Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: Gloss Silk Tolerance: ± 0.03mm Print Temperature: 195-215°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx) Net Weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models from NSE Imports #1.

ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models from NSE Imports #2.

Ships from: The UK ERYONE TPU Filament 500g 0.5kg 1.75mm 3D Printer Filament White Black Blue Red Clear Make Bendy Models £17.95

ERYONE TPU Filament is a high quality TPU Filament, excellent for making bendy models. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 15-30mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 0.5kg / 500g (inc spool) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

Sold out

Spool ofSea Glass Rainbow Aurora Rainbow 3D printing filament with a green spool holder on a white background

Spool of ERYONE Aurora Rainbow 3D printing filament with a green spool holder on a white background

Ships from: The UK ERYONE TPU Rainbow Flexible Filament 0.5kg 500g 1.75mm ±0.05mm for FDM 3D Printer Make Multi Colour Bendy Models £18.95

ERYONE Rainbow TPU Filament is excellent for making bright, multi coloured bendy models. Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent. Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High CompatibilityCompatible with 3D Printers that use 1.75MM filament, Such as: Prusa, Makerbot, etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 15-30mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 0.5kg / 500g (inc spool) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Sold out

ERYONE Triple Pack 3x0.5kg PLA Silk Filament 1.75mm 3D Printer Filament Gold Silver Copper Rainbow 3x500g from NSE Imports #1.

ERYONE Triple Pack 3x0.5kg PLA Silk Filament 1.75mm 3D Printer Filament Gold Silver Copper Rainbow 3x500g from NSE Imports #2.

Ships from: The UK ERYONE Triple Pack 3x0.5kg PLA Silk Filament 1.75mm 3D Printer Filament Gold Silver Copper Rainbow 3x500g £35.95

ERYONE Silk PLA Filament is ideal for making parts and models with a high gloss shine. These triple packs give you 3 great colours to make high gloss prints with, ERYONE Silk PLA is brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Shiny Silk Texture: Extremely fine and smooth on the print surface. Great value mini triple packs Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: High Gloss Shine Silk Tolerance: ± 0.03mm Print Temperature: 195-215°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Colour options: Gold/Silver/Copper or Rainbow/Gold/Copper (500g of each colour) Net Weight: 1.5kg (as 3x500g approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Sold out

ERYONE Ultra Silk PLA 3D Printer Filament 1.75mm 1kg Strong Colours Super High Gloss Finish from NSE Imports #1.

ERYONE Ultra Silk PLA 3D Printer Filament 1.75mm 1kg Strong Colours Super High Gloss Finish from NSE Imports #2.

Ships from: The UK ERYONE Ultra Silk PLA 3D Printer Filament 1.75mm 1kg Strong Colours Super High Gloss Finish £23.95

ERYONE Ultra Silk PLA Filament is a high quality PLA Filament, ideal for making parts and models with a high gloss shine. It produces models with a very high gloss metal surface and strong metal texture, brighter than most other silk filaments. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled. Features: Ultra Silk Texture: Extremely fine and smooth on the print surface. Stable Printing: Neatly rolled, high quality. Little Clogging: The diameter is strictly controlled at 1.75±0.03mm. Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Specifications: Filament Diameter: 1.75mm Finish: High Gloss Shine Silk Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed: 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx) Net Weight: 1kg (approx) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

ERYONE Wood 1kg 1.75mm PLA 3D Printer Filament: Create wood effect prints, great for sculptures and models from NSE Imports #1.

ERYONE Wood 1kg 1.75mm PLA 3D Printer Filament: Create wood effect prints, great for sculptures and models from NSE Imports #2.

Ships from: The UK ERYONE Wood 1kg 1.75mm PLA 3D Printer Filament: Create wood effect prints, great for sculptures and models from £17.95

Bring the warmth of wood to your 3D prints with Eryone Wood PLA filament. This filament combines PLA with wood fibres, creating a unique material with a wood-like texture and finish. Available in light and deep wood tones, your prints will look stunning. Great for sculptures, cosplay and model making. Features: Wood-Like Texture: Has a great wood-like texture, made with wood fibre. High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm. No Tangling: Perfect winded filament PLA, 100% tangle-free before unopened, neatly rolled, no curling or warping. High Compatibility: Universal compatibility with diverse 99% common-used FDM 3D printers in market. Vacuumed Sealed Packaging: The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust. Specifications: Filament Diameter: 1.75mm Finish: Wood Tolerance: ± 0.03mm Print Temperature: 200-220°C Recommended Print Temperature: 210-220°C Recommended Print Speed 30-60mm/s Heated Bed Temp: 55-70°C Gross weight: 1.35kg (approx.) Net weight: 1kg (approx.) FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Add to cart

Eyoyo 2D Wearable Bluetooth Barcode Scanner: Scan Barcodes and QR Codes with ease, even with gloves on from NSE Imports #1.

Eyoyo 2D Wearable Bluetooth Barcode Scanner: Scan Barcodes and QR Codes with ease, even with gloves on from NSE Imports #2.

Ships from: China Eyoyo 2D Wearable Bluetooth Barcode Scanner: Scan Barcodes and QR Codes with ease, even with gloves on £64.95

The Eyoyo EY-027 Wearable Bluetooth Barcode Scanner is a revolutionary new way to scan barcodes. It's a glove-mounted scanner that's perfect for left- or right-handed users, and it can be used with most computers, phones, and tablets. Great for inventory management, package scanning, point of sale (POS) and much more. Features: Wearable glove design: The Eyoyo EY-027 Wearable Bluetooth Barcode Scanner is worn on the back of your hand, freeing up your other hand for other tasks. This makes it ideal for inventory management, package scanning, point of sale (POS), and more. One glove fits all: The Eyoyo EY-027 Wearable Bluetooth Barcode Scanner is adjustable to fit most hand sizes, so you can use it with either your left or right hand. Bluetooth and USB connection: The Eyoyo EY-027 Wearable Bluetooth Barcode Scanner can connect to your devices via Bluetooth or USB. This gives you the flexibility to scan barcodes on the go or at your desk. 1D and 2D barcode scanner: The Eyoyo EY-027 Wearable Bluetooth Barcode Scanner can scan both 1D and 2D barcodes, including Code 128, EAN-8, EAN-13, ISBN, UPC-E, UPC-A, Interleaved 2 of 5, Industrial 2 of 5, Code 39, Code32, Code 39 Full ASCII, Codabar, Code 93, Code 11, MSI Plessey, PDF 417, QR Code, Micro QR, Data Matrix, Micro PDF417, Aztec, and GS1 DataBar. Long battery life: The Eyoyo EY-027 Wearable Bluetooth Barcode Scanner has a long battery life, so you can scan barcodes all day long without having to worry about running out of power. Package Includes: 1x Eyoyo EY-027 Barcode scanner and Glove, 1x Manual, 1x USB cable Suitable for use with: Most Bluetooth enabled Windows PC & Laptops, MacOS devices, iOS Devices and Android Devices

Add to cart

Eyoyo EY-017 2D Clip-On QR/Barcode Scanner: Turn Your Phone Into a Powerful POS or Inventory Management Tool from NSE Imports #1.

Eyoyo EY-017 2D Clip-On QR/Barcode Scanner: Turn Your Phone Into a Powerful POS or Inventory Management Tool from NSE Imports #2.

Ships from: China Eyoyo EY-017 2D Clip-On QR/Barcode Scanner: Turn Your Phone Into a Powerful POS or Inventory Management Tool £47.95

The Eyoyo EY-017 2D Bluetooth Clip-On Barcode Scanner is a powerful tool that can turn your phone into a POS or inventory management system. With its advanced CMOS sensor, it can easily capture most barcodes, including 1D and 2D barcodes, QR codes, and DataMatrix codes. The EY-017 also features a 3-button design that makes it easy to use with either hand. The EY-017 connects to your phone via Bluetooth, so you can use it with any Android or iOS device. It also has a built-in battery that provides up to 5 hours of use on a single charge. Features: Directly clip the back of your phone, easy to install, and removal Eyoyo barcode scanner With advanced CMOS sensor ability which can easily capture most barcodes Bluetooth turns on and connects automatically once initially paired Bluetooth connection works with Android and iOS phones, iPad, Android Tablet and Windows PC/Laptops. (Your device need support Bluetooth connection) Lightweight, only 90g / 3.1oz weight Built-in 1050mAh battery, provides up to 5 hours use, only needs 1.5 hours to charge Support scan most 1D & 2D barcodes, including QR codes and DataMatrix codes, supports scanning on screen codes 1D barcode support includes: UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13, EAN-14, EAN-128, UCC128, ISBN/ISSN, CODE11, CODE32, CODE39, CODE39 Full ASCII, CODE93, CODE128, cross 25 yards, industrial 25 yards, matrix 25 yards, China Postcode, UK/Plessey, GS1, etc 2D barcode support includes: QR, DataMatrix, PDF417, Aztec, Hanxin, Micro PDF417, and so on. Specifications: Bluetooth Mode: Bluetooth BLE, SPP, HID Battery capacity: 1050mAh Sensor resolution: 648X488 Sensor field of view: 66° horizontally, 50° vertically Light level: 0-10,000Lux Drop resistance: 1.2m/4ft drop on cement surface Package Includes: 1x Eyoyo EY-017 2D clip-on barcode scanner, 1x Charge cable, 1x Manual

Add to cart

EZP2019+ USB SPI Programmer with 12 adapters. Supports 24/25/25/93 Block EEPROMS from NSE Imports #1.

EZP2019+ USB SPI Programmer with 12 adapters. Supports 24/25/25/93 Block EEPROMS from NSE Imports #2.

Ships from: China EZP2019+ USB SPI Programmer with 12 adapters. Supports 24/25/25/93 Block EEPROMS from £9.95

The EZP2019+ may look small and cheap against larger programmer such as TL866II and T56 series, but don't be fooled by it's looks. These cracking little programmers pack a punch with a great feature set and small size, making them ideal for use in the workshop and on the move. Able to read, write, program, test and burn a wide variety of common IC packages. Some kits include a SOP8 test clip for ISP and SPI work such as; BIOS Recovery, Domestic Appliance Repair, TV, DVD, Hard Drive Controllers and more.. The LCD 2 in 1 cable included with the 12 Adapter kit allows work on a wide variety of LCD TV's and Monitors Please visit our EZP2019 Downloads Page for the latest software, manuals and chip support list. Need additional adapters? Browse our EZP2019 range to find suitable adapters. After purchase we will send links to download the software and manuals. Need additional adapters? Browse our DIP8 range to find suitable adapters. Please get in touch if you cannot find the adapter you need. Features: Appliance repair: suitable for household appliances maintenance industry flash color TV, DVD, computer motherboards, hard disk memory chips. he product research and development: the company product research and development in the process of burning test chip. The factory production: automatic offline copy function is particularly suited to factory mass burn memory chips. USB 2.0 interface, speed up to 12 MBPS. Read and write speed is super fast, read EN25T80 as long as three seconds, write EN25T80 only in 9 seconds, the fastest is currently on the market the BIOS chip programmer. The automatic identification of chip. Automatically detect whether chip. Automatic selection chip power supply voltage. Automatic offline copy. Includes PC software and programming device firmware upgrade. Fully supports 24/25/26/93 Block FLASH, EEPROM, Memory chips, etc.. Appearance is compact, easy to carry, and ordinary card about the size. Kit Contents: 2 Adapter Kit: EZP2019 with 2x SOP8/SOP16 solder plates. 5 Adapter Kit: EZP2019 with 2x SOP8/SOP16 solder plates. 1x SOP16 300mil, 1x SOP8 200mil, 1x SOP8 150mil. 8 Adapter Kit: EZP2019 with 2x SOP8/SOP16 solder plates, 1x SOP16 300mil, 1x SOP8 200mil, 1x SOP8 150mil, 1x 1.8V ZIF Adapter, 1x SOP8 Flash Clip, 1x Flash Clip Connector Board. 10 Adapter Kit: EZP2019 with 2x SOP8/SOP16 solder plates, 1x SOP16 300mil, 1x SOP8 200mil, 1x SOP8 150mil, 1x 1.8V ZIF Adapter, 1x SOP8 Flash Clip, 1x Flash Clip Connector Board, 2x QFN/DFN8/WSON8/MLF8 to DIP8. 12 Adapter Kit: EZP2019 with 2x SOP8/SOP16 solder plates, 1x SOP8 200mil, 1x SOP8 150mil,1x SOP16 300mil, 1x 1.8V ZIF Adapter, 1x SOP8 Flash Clip, 1x Flash Clip Connector Board, 1x LED LCD 2in1 cable, 2x QFN/DFN8/WSON8/MLF8 to DIP8.

Add to cart

Famicom N8 Flashcart: 8GB SD 1000 Games Retro Game Cartridge, Suitable For Nintendo Famicom from NSE Imports #1.

Famicom N8 Flashcart: 8GB SD 1000 Games Retro Game Cartridge, Suitable For Nintendo Famicom from NSE Imports #2.

Ships from: China Famicom N8 Flashcart: 8GB SD 1000 Games Retro Game Cartridge, Suitable For Nintendo Famicom from £49.95

Play your favourite games, homebrews, translations and the latest hardware limit pushing games on your Famicom System. These great flashcarts come with an 8GB SD for you to use and add your own games to. Features: For Nintendo Famicom Consoles. May work on cloned consoles (Dendy, Ken Kid), NES-On-A-Chip (NOAC) Devices, SNES/NES adapters like the Tristar/Tri-Star/Super 8. Should work with Famicom to NES adapters that support FlashCarts. Supports NES, Famicom and Famicom Disk System Games. Supports automatic flipping of FDS games. Support instant archive and reading Support FC / NES game gold finger. FC / NES game archive automatic backup to SD card (no special operation required) The Mapper support can be increased through software upgrade (the system loads the new Mapper file from the SD card) Support FAT / FAT16 / FAT32 format memory card. Support 32GB SD memory card. High-speed loading games (usually only 4 ~ 8 seconds to load each game) Specifications: The main control uses the powerful Cyclone II FPGA chip 2 * 512Kbyte SRAM as PRG and CHR data carrier. 128kbyte game archive chip. 1Mb flash BIOS chip. The matching level between the voltage transition buffer on the PPU and CPU bus is 5V NES bus and 3.3V Flashcart bus. Far less noise and power consumption than simple resistor buffering

Add to cart

Faux Fur LED Light Up Party Coat: Up to 6XL Women's Festival, Clubbing, Party Jacket from NSE Imports #1.

Faux Fur LED Light Up Party Coat: Up to 6XL Women's Festival, Clubbing, Party Jacket from NSE Imports #2.

Ships from: China Faux Fur LED Light Up Party Coat: Up to 6XL Women's Festival, Clubbing, Party Jacket from £45.95

There's no chance of you not being seen with this great Faux Fur LED Light Up Coat. It's a coat of two halves, by day it's a classy and chic plain white faux fur coat. By night it's a multicoloured rainbow of LED's across the front and rear. Ensure you are seen when out partying, clubbing or just with friends. These require 6x AA/LR6 style batteries, due to shipping restrictions we cannot include these. The LED's can be switched on and off as required. Please check the size guide to ensure a great fit. Size Bust Length Sleeve Shoulder Size S Bust 88cm34.6in Length 57cm22.4in Sleeve 57cm22.4in Shoulder 36cm14.7in Size M Bust 92cm36.2in Length 58cm22.8in Sleeve 58cm22.8in Shoulder 38cm14.9in Size L Bust 96cm37.8in Length 59cm23.2in Sleeve 59cm23.2in Shoulder 40cm15.7in Size XL Bust 100cm39.4in Length 60cm23.6in Sleeve 60cm23.6in Shoulder 42cm16.5in Size XXL/2XL Bust 104cm40.9in Length 61cm24in Sleeve 61cm24in Shoulder 44cm17.3in Size XXXL/3XL Bust 108cm42.5in Length 62cm24.4in Sleeve 62cm24.4in Shoulder 46cm18.1in Size 4XL Bust 112cm44.1in Length 63cm24.8in Sleeve 63cm24.8in Shoulder 48cm18.9in Size 5XL Bust 116cm44.6in Length 64cm25.2in Sleeve 64cm25.2in Shoulder 50cm44.7in Size 6XL Bust 120cm47.2in Length 65cm25.6in Sleeve 65cm25.6in Shoulder 52cm20.5in The little details: Material: Faux Fur Lighting Technology: Multicolour LED Style: Streetwear, Party, Clubbing Gender: Women, Women, Female, Femme, Girls, Ladies Clothing Length: Regular Decoration: LED Lighting Collar: O-Neck Closure Type: Covered Button Sleeve Length: Full Sleeve Style: Regular Colour: White Occasion: Party, Rave, Rock, Cyber, Synthwave, Mall Goth, E-Girl, Pride Name: LED Faux Fur Coat Style: Winter Party Fur Coat Style: Nightclubbing Jacket

Add to cart

Sold out

Fila Dryer S4: Warm and dry your filament in bulk from NSE Imports #1.

Fila Dryer S4: Warm and dry your filament in bulk from NSE Imports #2.

Ships from: China Fila Dryer S4: Warm and dry your filament in bulk £131.95

Elevate your 3D printing game with the SUNLU S4 Filament Dryer, the ultimate solution for moisture-free filament and flawless prints. This innovative dryer quadruples your drying capacity with its large chamber and four independent drying bays, perfect for multi-material printing, high-volume workflows, or simply drying multiple spools simultaneously. Features: Quadruple Drying Capacity: Each bay holds spools up to 1kg and 210mm diameter, drying four spools concurrently for maximum efficiency Precision Drying: Adjustable temperature (35°C - 70°C) and timer (1-24 hours) ensure customized drying for different filament types Extend the shelf life of the filament by keeping it fresher for longer Uniform Heating: Innovative 360° surround heating with PTC technology guarantees consistent drying throughout each spool Fast heating: Equipped with a 350W PTC heater, it only takes 30 minutes to heat up to 50 ℃, resulting in faster heating and higher efficiency Adjustable Humidity: Adjust the humidity inside the chassis. When the humidity inside reaches the set value (30% -50%), it will automatically start until the humidity drops to 25%, and then stop to better meet the humidity requirements of different types of consumables Large Capacity: Accommodates spools up to 210mm diameter and 85mm width, drying multiple spools simultaneously User-Friendly Design: Intuitive touch screen control, clear indicators, and automatic shut-off for ease of use and safety Safety Protections: PTC (Positive Temperature Coefficient Thermistor), temperature switch, software triple protection, real-time monitoring of temperature, and issuing alarm prompts in case of abnormal temperature Silent Operation: Enjoy a quiet drying experience that won't disrupt your workspace Reduce waste: Dry and reuse filament instead of throwing it away, saving money and resources The SUNLU S4 is perfect for: Demanding professionals: Ensure consistent, high-quality prints for your projects Enthusiastic hobbyists: Take your prints to the next level with superior quality and efficiency Anyone who prioritizes convenience and reliability: Simplify your 3D printing with a powerful and user-friendly dryer Specifications: Name: S4 Filament Dryer Box Color: Black Temperature range: 35°C - 70°C Size: 458 * 218 * 312mm (including tripod height) Internal size: 450 * 210 * 211mm Plug: Please pick from AU, EU, US, UK Suitable Filament Diameter: 1.75mm/2.85mm/3.00mm Suitable Filament Type: All Filaments inc. PLA, PETG, ABS, TPU, Carbon Fibre, Silk, Marble, Wood and more Maximum Working Power: 320W Pack contains: 1x SUNLU S4 Filament Dryer, 1x Mains Adapter (PLUG AS SELECTED)

Sold out

[US] Flashforge PLA 3D Printer Filament: 1kg 1.75mm various colours from NSE Imports #1.

[US] Flashforge PLA 3D Printer Filament: 1kg 1.75mm various colours from NSE Imports #2.

Ships from: The UK Flashforge PLA 3D Printer Filament: UK Stock 1kg 1.75mm various colours £20.95

Flashforge PLA Filament is a high quality filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Flashforge filament, firmly follows the ISO 9001 quality standards and lean production requirements to ensure each roll of 3D filament produces great results. Features: Environmentally friendly: Flashforge PLA filament 1.75mm is drilled from corn grain, has no odor omitted in use, and passes the EU RoHS certification. Flashforge filament PLA 1.75 is suitable for teenagers and children to use at home or school, harmless to the human body. High precision: The wire diameter of Flashforge PLA filaments is strictly controlled, with deviation less than 0.05mm. Effectively improving 3D printing effects. Strong compatibility: Flashforge best PLA materials are applicable to mainstream FDM 3D printers on the market. Good fluidity after melting: Greatly reducing problems of nozzle plug High strength: Flashforge PLA filaments ensure high hardness of the printed models. Wear resistant and durable in use. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.05mm Print Temperature: 190-220°C Recommended Print Speed 60-90mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Tensile Strength: ≥60 MPa Elongation at Break: ≥3 % Flexural Strength: ≥60 MPa Flexural Modulus: ≥2500 MPa IZOD Impact Strength: ≥16 J/m Layer Thickness: 0.1-0.2 mm Heat Deflection Temperature: ≥55 °C FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Fluffy Collar Christmas Women's Cardigan: Bold Xmas print for those colder months from NSE Imports #1.

Fluffy Collar Christmas Women's Cardigan: Bold Xmas print for those colder months from NSE Imports #2.

Ships from: China Fluffy Collar Christmas Women's Cardigan: Bold Xmas print for those colder months from £24.95

Wrap up warm and head out in style this Xmas with this great Korean Style Christmas Geometric Patterned Oversized Cardigan, it's a great design that will team up well with jeans, skirts, blouses and more. The Collar, Button Strip and Pockets has a chunky faux fur style that makes this cardigan a little different.Please check size guide image before ordering, for a baggier or oversized look. If you are close to a size limit please choose a larger size for. Size Bust Length Sleeve SizeS Bust104cm40.9in Length59cm23.2in Sleeve58cm22.8in SizeM Bust106cm41.7in Length60cm23.6in Sleeve59cm23.2in SizeL Bust108cm42.5in Length61cm24in Sleeve60cm23.6in SizeXL Bust110cm43.3in Length62cm24.4in Sleeve61cm24in SizeXXL/2XL Bust112cm44.1in Length63cm24.8in Sleeve62cm24.4in The Little Details: Style: Casual, Geek, Festive Cardigan Winter Cardigan Material: Polyester Decoration: Ruched Pattern Type: Cartoon Clothing Length: Regular Collar: Turn-down Collar Occasion, Daily, Everyday Season: Winter, Autumn, Spring, X-Mas, Christmas, Holidays Sleeve Length: Full Sleeve Style: Regular Thickness: Thick Closure Type: Buttons Gender: Woman, Women, Female, Girls, Ladies

Add to cart

Fluffy Diamond Pattern Casual Women's Cardigan: Bold geometric prints with a tufted texture from NSE Imports #1.

Fluffy Diamond Pattern Casual Women's Cardigan: Bold geometric prints with a tufted texture from NSE Imports #2.

Ships from: China Fluffy Diamond Pattern Casual Women's Cardigan: Bold geometric prints with a tufted texture £24.95

Get ready for the colder weather with this diamond print cardigan, featuring large bold colors and raised fluffy diamond sections, it's not something you'll see everyone wearing. Ideal for causal, office and everyday wear it's geek chic cute, team it with all your daily essentials for a great mix and match look.Please check the sizing guide to ensure a great fit. Like the really big and baggy look, jump up a size for extra room. Size Bust Length Sleeve SizeS Bust80-120cm31.5-47.2in Length64cm25.2in Sleeve37cm14.6in SizeM Bust80-120cm31.5-47.2in Length65cm25.6in Sleeve37cm14.6in SizeL Bust82-122cm32.3-48.0in Length66cm26.0in Sleeve37cm14.6in SizeXL Bust85-125cm33.5-49.2in Length66cm26.0in Sleeve38cm15.0in SizeXXL/2XL Bust85-125cm33.5-49.2in Length67cm26.4in Sleeve38cm15.0in The little details: Style: Casual, Everyday, Geek, Nerd, Office Material Composition: Polyester Decoration: Button Pattern Type: Knitted Clothing Length: Regular Collar: V-Neck Season: Spring, Autumn, Fall, Winter Sleeve Length: Full Sleeve Style: Regular Thickness: Thick Closure Type: Single Breasted Gender: Women, Woman, Girls, Ladies, Female

Add to cart

Fluffy Reindeer Christmas Cashmere Sweater: With Reindeer and snow print. from NSE Imports #1.

Fluffy Reindeer Christmas Cashmere Sweater: With Reindeer and snow print. from NSE Imports #2.

Ships from: China Fluffy Reindeer Christmas Cashmere Sweater: With Reindeer and snow print. from £14.95

Stay cosy and stylish this holiday season with our Fluffy Reindeer Christmas jumper! Featuring a playful reindeer design, contrasting ruffled collar and cuffs, and a snowy backdrop, this cashmere sweater is perfect for chilly days and cosy nights. Made with a blend of cashmere and polyester, it will keep you warm and snug. Be sure to check our size guide for the perfect fit! Size Bust Length Sleeve Shoulder Size S Bust 84cm33.1in Length 54cm21.3in Sleeve 50cm19.7in Shoulder 35cm13.8in Size M Bust 86cm33.9in Length 55cm21.7in Sleeve 51cm20.1in Shoulder 36cm14.2in Size L Bust 88cm34.6in Length 56cm22.0in Sleeve 52cm20.5in Shoulder 37cm14.6in Size XL Bust 90cm35.4in Length 57cm22.4in Sleeve 53cm20.9in Shoulder 38cm15.0in Size 2XL Bust 92cm36.2in Length 58cm22.8in Sleeve 54cm21.3in Shoulder 39cm15.4in Size 3XL Bust 94cm37.0in Length 59cm23.2in Sleeve 55cm21.7in Shoulder 40cm15.7in The little details: Pattern Type: Reindeer, Christmas, X-Mas, Xmas Clothing Length: Regular Material: Cashmere, Polyester Collar: O-Neck Style: Knitted Jumper Season: Winter, Autumn Decoration: Fluffy Texture Sleeve Length: Full, Long Sleeve Style: Regular Thickness: Standard Style: Casual, Everyday, Festive Feature: Women Sweaters, Women's Tops Feature: Ladies Pullover

Add to cart

Fluffy Sheep Cardigan: Sheep print with a tufted texture from NSE Imports #1.

Fluffy Sheep Cardigan: Sheep print with a tufted texture from NSE Imports #2.

Ships from: China Fluffy Sheep Cardigan: Sheep print with a tufted texture £23.95

These baa-verlous fluffy sheep cardigans are super cute, covered in fleecy little sheep across the front and rear, it not only looks great, but feels great as well ewe won't want to stop stroking them. Team them up with jeans, skirts, blouses and more. Please check out size guide to ensure a great fit. Size Bust Length Sleeve Shoulder Size S Bust 98cm38.6in Length 58cm22.8in Sleeve 40cm15.7in Shoulder 50cm19.7in Size M Bust 102cm40.2in Length 59cm23.2in Sleeve 41cm16.1in Shoulder 51cm20.1in Size L Bust 106cm41.7in Length 60cm23.6in Sleeve 42cm16.5in Shoulder 52cm20.5in Size XL Bust 110cm43.3in Length 62cm24.4in Sleeve 43cm16.9in Shoulder 53cm20.9in Size 2XL Bust 114cm44.9in Length 64cm25.2in Sleeve 44cm17.3in Shoulder 54cm21.3in Size 3XL Bust 118cm46.5in Length 66cm26.0in Sleeve 45cm17.7in Shoulder 55cm21.7in The little details: Casual, Everyday, Daily Material: Polyester, Acrylic, Cotton Decoration: Fluffy Sheep Pattern Type: Animal, Sheep Clothing Length: Regular Collar: V-Neck Season: Spring, Autumn, Fall Sleeve Length: Long Sleeve Style: Regular Thickness: Standard Closure Type: Single Breasted, Buttons Pockets: Yes Item: Ladies Cardigan, Women's Cardigan, Girls Cardigan, Geek Cardigan

Add to cart

7 8 9 10 11

Friendly Service

Excellent service with a friendly touch.

Free Tracked Delivery to most destinations

Free delivery to UK, EU, US, AU and more.

Low Prices

If we are not the lowest please get in touch.

Latest and Greatest Tech

We are always searching for the latest products

NSE IMPORTS
OFFICE 7
35-37 LUDGATE HILL
LONDON
EC4M 7JN

shop@nseimports.co.uk

07967323318

Links Search Our Site About NSE Imports Contact Us Privacy Policy Refund Policy Shipping Policy Terms of Service View our Blog Sitemap Klarna Information

Find anything you need

Friendly Service

Free Tracked Delivery to most destinations

Low Prices

Latest and Greatest Tech