Ships from: The UK
ERYONE Luminous PLA Filament 1.75mm 1kg Glow in the Dark Green 3D Printer Filament Ideal for Halloween
£25.95
ERYONE Luminous PLA Filament is a high quality Glow in the dark PLA Filament that's great for creating Halloween model and props, prints and parts. Great for sculptures, cosplay and model making. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Easythreed and more.
Features:
Contains noctilucent power, Charge from Sunlight, Incandescent lamp, Ultraviolet light.
Make awesome Glow in the dark prints.
High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm.
No Tangling: Perfect winded filament PLA, 100% tangle-free before unopened, neatly rolled, no curling or warping.
High Compatibility: Universal compatibility with diverse 99% common-used FDM 3D printers in market.
Vacuumed Sealed Packaging: The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust.
Eco-friendly: Made from Corn Starch and PLA, fully recyclable.
Specifications:
Filament Diameter: 1.75mm
Finish: Glow in the Dark Green
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 200-220°C
Heated Bed Temp: 55-70°C
Recommended Print Speed 30-60mm/s
In order to avoid corrosion, higher hardness steel nozzles are recommended.
Gross weight: 1.35kg (approx)
Net weight: 1kg (approx)
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Ships from: The US
[US] ERYONE Glow in the Dark Filament: 1.75mm 1kg 3D Printer Luminous PLA Filament
£26.95
ERYONE Luminous PLA Filament is a high quality Glow in the dark PLA Filament that's great for creating Halloween model and props, prints and parts. Great for sculptures, cosplay and model making. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Easythreed and more.
Features:
Contains noctilucent power, Charge from Sunlight, Incandescent lamp, Ultraviolet light.
Make awesome Glow in the dark prints.
High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm.
No Tangling: Perfect winded filament PLA, 100% tangle-free before unopened, neatly rolled, no curling or warping.
High Compatibility: Universal compatibility with diverse 99% common-used FDM 3D printers in market.
Vacuumed Sealed Packaging: The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust.
Eco-friendly: Made from Corn Starch and PLA, fully recyclable.
Specifications:
Filament Diameter: 1.75mm
Finish: Glow in the Dark Green
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 200-220°C
Heated Bed Temp: 55-70°C
Recommended Print Speed 30-60mm/s
In order to avoid corrosion, higher hardness steel nozzles are recommended.
Gross weight: 1.35kg (approx.)
Net weight: 1kg (approx.)
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.