Arduino, Raspberry Pi, ATMega

These updated USB Type-C ported Arduino UNO R3 boards are fully compatible board powered by an Atmega328p and CH340G serial interface. While a clone it functions exactly the same and is fully compatible with the Arduino Software (IDE). Clone UNO's can be manufactured under the creative commons files provided on the Arduino website. Our multi packs are great value if you are rolling out larger runs of the same project. Features: Fully compatible Arduino UNO R3 clone board Updated design using a modern USB Type-C connector High build quality Great for Education, Hobbyists and Projects Quick start guide: Do not connect the UNO board until you have followed these steps. Download the latest Arduino IDE Download the CH341 USB x86/x64 driver Plug in UNO development board, the driver will be installed automatically Start the IDE and select the UNO R3 as your target Select the COM port, you may need to check device manager if unsure of this. Load or create your code and upload to the board. Enjoy 😃 Specifications: Microcontroller: ATmega328 Operating Voltage: 5v Input Voltage (recommended): 7-12v Input Voltage (limits): 6-20v Digital IO Pins: 4 Analogue Input Pins: 6 DC Current per IO Pin: 40mA DC Current for 3.3V Pin: 50mA Flash Memory: 32 KB (ATmega328) 0.5KB used by bootloader SRAM: 2 KB EEPROM: 1 KB Clock Speed: 16 MHz USB Chip: CH340G Package includes: UNO R3 Board, Headers and USB Cable (when Cable option selected)

The Arduino UNO R3 is a fully compatible board powered by an Atmega328p and CH340G serial interface. While a clone it functions exactly the same and is fully compatible with the Arduino Software (IDE). Clone UNO's can be manufactured under the creative commons files provided on the Arduino website. Our multi packs are great value if you are rolling out larger runs of the same project. Features: Fully compatible Arduino UNO R3 clone board High build quality Great for Education, Hobbyists and Projects Quick start guide: Do not connect the UNO board until you have followed these steps. Download the latest Arduino IDE Download the CH341 USB x86/x64 driver Plug in UNO development board, the driver will be installed automatically Start the IDE and select the UNO R3 as your target Select the COM port, you may need to check device manager if unsure of this. Load or create your code and upload to the board. Enjoy 😃 Specifications: Microcontroller: ATmega328 Operating Voltage: 5v Input Voltage (recommended): 7-12v Input Voltage (limits): 6-20v Digital IO Pins: 4 Analogue Input Pins: 6 DC Current per IO Pin: 40mA DC Current for 3.3V Pin: 50mA Flash Memory: 32 KB (ATmega328) 0.5KB used by bootloader SRAM: 2 KB EEPROM: 1 KB Clock Speed: 16 MHz USB Chip: CH340G Package includes: UNO R3 Board, Headers and USB Cable (when Cable option selected)