Arduino, Raspberry Pi, ATMega

These SMD component test clips are ideal for getting a in circuit connection to very small surface mounted IC's. Ideal for use with Logic Analysers, Signal Generators, Oscilloscopes and IC Programmers, you can test, trace, ICSP, program and hack you way to a job well done. Easy to use pistol grip style design, sleeved arms, secure grip hooks and standard sized DuPont style connectors allow ease of use. Features and Specifications: Model: SDK08 Pack Size: 10 Clips Pack Contents: 2 Pieces of Yellow, Green, Black, Blue, Red Connectors Rated Voltage: 40V max Rated Amperage: 2A max Min Chip Pin Spacing: 0.3mm Connector: DuPont

These updated USB Type-C ported Arduino UNO R3 boards are fully compatible board powered by an Atmega328p and CH340G serial interface. While a clone it functions exactly the same and is fully compatible with the Arduino Software (IDE). Clone UNO's can be manufactured under the creative commons files provided on the Arduino website. Our multi packs are great value if you are rolling out larger runs of the same project. Features: Fully compatible Arduino UNO R3 clone board Updated design using a modern USB Type-C connector High build quality Great for Education, Hobbyists and Projects Quick start guide: Do not connect the UNO board until you have followed these steps. Download the latest Arduino IDE Download the CH341 USB x86/x64 driver Plug in UNO development board, the driver will be installed automatically Start the IDE and select the UNO R3 as your target Select the COM port, you may need to check device manager if unsure of this. Load or create your code and upload to the board. Enjoy 😃 Specifications: Microcontroller: ATmega328 Operating Voltage: 5v Input Voltage (recommended): 7-12v Input Voltage (limits): 6-20v Digital IO Pins: 4 Analogue Input Pins: 6 DC Current per IO Pin: 40mA DC Current for 3.3V Pin: 50mA Flash Memory: 32 KB (ATmega328) 0.5KB used by bootloader SRAM: 2 KB EEPROM: 1 KB Clock Speed: 16 MHz USB Chip: CH340G Package includes: UNO R3 Board, Headers and USB Cable (when Cable option selected)

The Geekcreit XH-M229 ATX Power Terminal Board is a handy device that can be used for a variety of tasks, including: Testing ATX PSU voltages Converting an ATX PSU into a bench supply Simply powering on a Bit-mining rig The board provides 4 fused outputs: +12v, -12v, +5v, and +3.3v. It also features a power on/off switch and power LED. The terminal outputs allow for wire wrap or crimped hole/spade connectors. This makes the board great for projects needing higher wattage supply at different voltages. Features: Provides 4 fused outputs: +12v, -12v, +5v, and +3.3v Power on/off switch and Power LED The terminal outputs allow for wire wrap or crimped hole/spade connectors Great for projects needing higher wattage supply at different voltages Specifications: Model: XH-M229 Compatible PSU: ATX ATX PIN Type: 24 pin Switch: Yes Number of sets of output: Four sets of outputs, +12, -12, +5, +3.3 Size: 12.8x4.8cm/5.04x1.89in Package included: 1 x XH-M229 24 Pin Desktop Chassis Power Supply ATX Adapter Transfer Board Module

The Arduino UNO R3 is a fully compatible board powered by an Atmega328p and CH340G serial interface. While a clone it functions exactly the same and is fully compatible with the Arduino Software (IDE). Clone UNO's can be manufactured under the creative commons files provided on the Arduino website. Our multi packs are great value if you are rolling out larger runs of the same project. Features: Fully compatible Arduino UNO R3 clone board High build quality Great for Education, Hobbyists and Projects Quick start guide: Do not connect the UNO board until you have followed these steps. Download the latest Arduino IDE Download the CH341 USB x86/x64 driver Plug in UNO development board, the driver will be installed automatically Start the IDE and select the UNO R3 as your target Select the COM port, you may need to check device manager if unsure of this. Load or create your code and upload to the board. Enjoy 😃 Specifications: Microcontroller: ATmega328 Operating Voltage: 5v Input Voltage (recommended): 7-12v Input Voltage (limits): 6-20v Digital IO Pins: 4 Analogue Input Pins: 6 DC Current per IO Pin: 40mA DC Current for 3.3V Pin: 50mA Flash Memory: 32 KB (ATmega328) 0.5KB used by bootloader SRAM: 2 KB EEPROM: 1 KB Clock Speed: 16 MHz USB Chip: CH340G Package includes: UNO R3 Board, Headers and USB Cable (when Cable option selected)