Flashforge PLA-CF Filament: 1kg Spool, 10% Carbon Fiber, 1.5x Stronger than PLA


Flashforge PLA-CF Filament: 1kg Spool, 10% Carbon Fiber, 1.5x Stronger than PLA

Ships from our: China Warehouse

Estimated delivery 12 to 20.

Delivery to most countries
Product description

Flashforge Carbon Fiber PLA Filament is a high quality filament, made from high quality virgin plastic and with 10% Carbon Fiber content, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. Carbon Fiber PLA is ideal for high strength, lightweight print.

Flashforge filament, firmly follows the ISO 9001 quality standards and lean production requirements to ensure each roll of 3D filament produces great results.


  • Environmentally friendly: Flashforge PLA filament 1.75mm is drilled from corn grain, has no odor omitted in use, and passes the EU RoHS certification. Flashforge filament PLA 1.75 is suitable for teenagers and children to use at home or school, harmless to the human body.
  • High precision: The wire diameter of Flashforge PLA filaments is strictly controlled, with deviation less than 0.05mm. Effectively improving 3D printing effects.
  • Strong compatibility: Flashforge best PLA materials are applicable to mainstream FDM 3D printers on the market.
  • Good fluidity after melting: Greatly reducing problems of nozzle plug
  • High strength: Flashforge PLA-CF filament is upto 1.5x stronger than regular PLA, ensures high hardness of the printed models. Wear resistant and durable in use.


  • Filament Diameter: 1.75mm
  • Tolerance: ± 0.05mm
  • Carbon Fiber Content: 10%
  • Print Temperature: 200-230°C
  • Heated Bed Temperature: 40-50°C
  • Recommended Print Speed 60-90mm/s
  • Printable on Glass Beds: Yes, requires glue
  • Print using hardened nozzle: Yes
  • Produced mainly from Corn Starch, eco friendly material.
  • Net Weight: 1kg (inc spool)
  • Gross Weight: 1.3-1.4kg
  • Tensile Strength: ≥40-45 MPa
  • Modulus of Elasticity: 1100~1300 MPa
  • Elongation at Break: ≥11.5~13.5%
  • Flexural Strength: ≥85~95 MPa
  • Heat Deflection Temperature: ≥60 °C


  • Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
  • Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
  • Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

Free Tracked Shipping*

*Some countries may have a small delivery charge due to disproportionately high shipping.

Fully secured payments

All our payments are handled by secure methods, we'll never see or ask for your payment details.

Friendly service

We pride ourselves on great service, no matter the order value, we want you to be satisfied with it.