ERYONE Rainbow PLA Filament brings some multicolour action to your prints, with color changes every 15m of filament, each print will be unique. With 4 colour choices, ranging from the very bold Metal Silk, to the the more subtle tones of the Steampunk Rainbow, it produces models with a very high quality, colour packed finish.

Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. 

Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled.

Features:

• Make some bold prints with Classic Rainbow and Metal Silk
  
• Make subtle colour changes with Rainbow Lagoon and Steampunk Rainbow
• Stable Printing: Neatly rolled, high quality.
• Little Clogging: The diameter is strictly controlled at 1.75±0.03mm.
• Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
• High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.

Specifications:

• Filament Diameter: 1.75mm
• Finish: Awesome Rainbows
• Tolerance: ± 0.03mm
• Print Temperature: 190-220°C
• Recommended Print Temperature: 210-220°C
• Recommended Print Speed: 30-60mm/s
  
• Heated Bed Temp: 55-70°C
• Gross weight: 1.35kg (approx)
• Net Weight: 1kg (approx)

FAQ:

• Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
• Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
• Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.