keepang

KEEPANG PETG Filament is a premier choice for FDM 3D printers, providing a wide range of bold colours. Each filament is carefully packaged in a vacuum-sealed container to ensure maximum freshness. With a specialized winding process and precise tolerances, this filament delivers consistently flawless prints. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech Kingroon Eaythreed Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 230-250°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc. spool) Gross Weight: 1.3-1.4kg FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PETG is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.

KEEPANG PLA Filament is a top-of-the-line option for FDM 3D printers, offering a diverse selection of vibrant colours. Each filament is carefully packaged in a vacuum-sealed container to maintain optimal freshness, while their tangle-free winding process and precise tolerances guarantee consistently smooth and reliable prints. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech Kingroon Eaythreed Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-230°C Recommended Print Temperature: 210-220°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc. spool) Gross Weight: 1.3-1.4kg FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.