UK Warehouse (96)
Sold out
NSE Imports
30-Piece Stainless Steel Watch Band Spring Bars for...
£0.00
Ships from: The UKShips from UK to UK only
A great little kit for the professional of hobbyist watch repairer. These high quality link pins should suit most watches with a 8-22mm pin.
Features:
8-22mm stainless steel watch band spring bars
Excellent workmanship and durability with stainless steel material
Ideal for watch repair usage
Specifications:
Material: Stainless steel
Length: 8-22mm
Diameter: 1.5mm
Quantity: 30pcs
Benefits:
These high-quality link pins are perfect for most watches with a 8-22mm pin.
They are made of durable stainless steel and are built to last.
They are easy to use and make watch repair a breeze.
Sold out
SGODDE
Portable Wireless Vacuum Sealer for Food Storage, Sous...
£23.46
Ships from: The UKShips from UK to UK only
This handy vacuum sealer is perfect for both food storage and sous vide cooking. With its powerful electric pump system, it can quickly remove excess air from food bags, extending the shelf life of your food by up to 7 times. The vacuum sealer also comes with a variety of reusable bags, so you can easily store or cook most food items.
Features:
Powerful Electric Pump System: Internal 3.7V lithium battery, metal casing for durability, powerful vacuum technology that can quickly remove excess air in the vacuum sealed bag. The preservation time is 7 times longer than normal, and the nutrients in the food are locked to prevent bacterial invasion.
FDA Approved Material: Eco-friendly food bag material has passed FDA inspection and certification, harmless to the human body. It can be reused after washing and drying with warm water and detergent, which greatly saves living expenses. Suitable for freezing, microwave or cooking.
Wireless and Convenient: Portable automatic vacuum sealing machine uses aluminium alloy material, which is more durable, One start/off button, with USB charging cable, and 800 mAh battery can work continuously for 2 hours. Lightweight and easy to carry, it can be used at home or outdoors without a power interface, which is convenient for your life.
Multi Purpose: The SGODDE vacuum food sealing machine can keep food fresh and save storage space for fruits, vegetables, seafood, meat, nuts and other foods. The shelf life of vacuum sealed food is 3-5 times that of ordinary bags, whether it is At home, work or travel, it can be used for food storage, food freezing or sous vide cooking, etc.
Specifications:
Product Name: Vacuum Sealer Machine
Voltage(V): 3.7v
Battery: 800 mAh
Product Material: ABS, Aluminium Alloy
Product Weight: 0.46 kg
Product Dimension: 12.00 x 4.90 x 4.90 cm
Pack includes: 1 x Wireless automatic food vacuum machine, 1 x USB charging cable, 2 x Sealing clips, 2 x Reusable vacuum food bags(L), 5 x Reusable vacuum food bags(M), 5 x Reusable vacuum food bags(S)
Sold out
NSE Imports
10x 16T GT2 Aluminium Timing Pulley With 16...
£15.14
Ships from: The UKShips from UK to UK only
Repair or build your 3D printer belt drives with these high-quality timing pulleys. Suitable for use with most belt-driven printers using the same size pulley, including but not limited to:
Creality
Artillery
Sunlu
Geeetech
Prusa
Makerbot
This great value pack of 3 is ideal for keeping spares on hand or starting your own build. GT2 pulleys are designed for linear motion. With a rounded tooth profile, it ensures the belt tooth fits smoothly and precisely in the groove.
Specifications:
Tooth Count: 16T
Material: Aluminum
Bore: 3mm
Width of Gear: 7mm
Package Includes: 3 x GT2 Aluminum timing belt pulleys
Sold out
NSE Imports
3x 16T GT2 Aluminium Timing Pulley With 16...
£9.25
Ships from: The UKShips from UK to UK only
Repair or build your 3D printer belt drives with these high-quality timing pulleys. Suitable for use with most belt-driven printers using the same size pulley, including but not limited to:
Creality
Artillery
Sunlu
Geeetech
Prusa
Makerbot
This great value pack of 3 is ideal for keeping spares on hand or starting your own build. GT2 pulleys are designed for linear motion. With a rounded tooth profile, it ensures the belt tooth fits smoothly and precisely in the groove.
Specifications:
Tooth Count: 16T
Material: Aluminum
Bore: 3mm
Width of Gear: 7mm
Package Includes: 3 x GT2 Aluminum timing belt pulleys
ERYONE
Eryone Star One Super Quiet 3D Printer With...
£144.95
Ships from: The UKShips from UK to UK only
The Eryone Star One is a great entry level 3D Printer. With a 220*220*250mm build volume, quiet steppers and high quality MeanWell power supply, it's ideal for those either new to 3D Printer or looking for a secondary printer.
Features:
220*220*250mm Build Volume
32-bit Cortex M4 Motherboard
Heated Bed
End of filament detector
Easy to use scroll controller
TMC2209 Drivers
Power Loss Print Resume
Specifications:
Brand Name: ERYONE
Model: Star One
Origin: Mainland China
Max Heated Bed Temp: 100°C
Maximum Printing Speed: 70mm/s
Nozzle Diameter: 0.4mm
Max Nozzle Temp: 250°C
Auto Leveling: No
Maximum Print Size: 220x220x250mm
Consumables Diameter: 1.75mm
Printing Speed: 40-70mm/s
Language: English
Suitable Filament: PLA/PETG/TPU/ABS/ASA/Nylon
Slice Software: STL,.OBJ, .ADE, .AMF
Precision: 0.05mm
Operating System: WIN/MAC/LINUX
Molding Technology: FDM
Interface Type: USB
Certification: CE/ROHS, CE/ROHS
Power Supply Output: +24V 14.5A MAX
Power Supply Input: 115/230 VAC 50/60HZ
Operating Environmental Temperature: 10~32°C
Non-Operating Environmental Temperature: 0~32°C
Sold out
ERYONE
ERYONE Scented Filament 1kg 1.75mm Spools Fruit &...
£48.95
Ships from: The UKShips from UK to UK only
ERYONE Scented PLA Filament brings a new dimension to your prints, smell! Choose from either fruit or flowers and create exciting designs that smell as good as they look. Ideal for both crafting at home or for a business, created scented holders, jars, boxes, faux flower bouquets and more...
Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Available in two different scent ranges:
Fruit: Green Apple, Mango, Orange and Strawberry
Flowers: Jasmine, Tulip, Rose, Lavender
Provides upto 2 months of full strength scent, the scent will gradually decrease over time to about half strength after 12 months.
Prints like regular PLA filament, no special settings required.
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot, etc. ERYONE filaments are been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 200-215°C
Heated Bed Temp: 60-70°C
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (approx.)
Gross Weight: 1.3-1.4kg
Tensile Strength [MPa]: 82-85
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out
ERYONE
ERYONE Scented Filament 4x 250g Spools Fruit &...
£51.95
Ships from: The UKShips from UK to UK only
ERYONE Scented PLA Filament brings a new dimension to your prints, smell! Choose from either fruit or flowers and create exciting designs that smell as good as they look. Ideal for both crafting at home or for a business, created scented holders, jars, boxes, faux flower bouquets and more...
Made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Available in two different scent ranges each contains 1x 250g (for 4 spools total) of each scent:
Fruit: Green Apple, Mango, Orange and Strawberry
Flowers: Jasmine, Tulip, Rose, Lavender
Provides upto 2 months of full strength scent, the scent will gradually decrease over time to about half strength after 12 months.
Prints like regular PLA filament, no special settings required.
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot, etc. ERYONE filaments are been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 190-220°C
Recommended Print Temperature: 200-215°C
Heated Bed Temp: 60-70°C
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (approx.)
Gross Weight: 1.3-1.4kg
Tensile Strength [MPa]: 82-85
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out
ERYONE
ERYONE PETG or PLA Carbon Fiber Filament: Ideal...
£29.95
Ships from: The UKShips from UK to UK only
ERYONE Carbon Fiber filament is provide strong yet lightweight prints. Thanks to the infusion of Carbon Fiber into the filament you can create prints with thinner side walls without sacrificing rigidity. Available in both PLA and PETG you can choose the most suitable base material for your required design.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High Compatibility: Compatible with most 3D Printers that support 1.75mm PLA or PETG filament.
NOTE: Requires good ventilation during printing due to the presence of styrene.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature PLA Carbon Fiber: 190-220°C
Print Temperature PETG Carbon Fiber: 220-240°C
Heated Bed Temp: 55-70°C
Fan Speed: None to Minimal
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out
ERYONE
ERYONE ABS 1.75mm 3D Printing Filament 1kg Ideal...
£26.95
Ships from: The UKShips from UK to UK only
ERYONE ABS filament is a new material designed to durable and heat resistant prints. It's great for mechanical parts and parts needing a high heat resistance.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High Compatibility: Compatible with most 3D Printers that support 1.75mm ABS filament.
NOTE: Requires good ventilation during printing due to stronger fumes that are typical with ABS.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 230-260°C
Heated Bed Temp: 90-110°C
Fan Speed: None to Minimal
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out
ERYONE
ERYONE ASA 1.75mm 3D Printing Filament 1kg UV...
£27.95
Ships from: The UKShips from UK to UK only
ERYONE ASA (Acrylonitrile styrene acrylate) filament is a new material designed to give UV Resistant prints with similar strengths and quality to ABS. Providing superior heat and chemical resistance to ABS it's great for parts for used in outdoor, automotive and hostile environments. While easy to print and less prone to warping than ABS, care should be taken not to overcool the print for best results.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High Compatibility: Compatible with most 3D Printers that support 1.75mm ABS filament.
NOTE: Requires good ventilation during printing due to the presence of styrene.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 230-260°C
Heated Bed Temp: 90-110°C
Fan Speed: None to Minimal
Recommended Print Speed 30-60mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Sold out
ERYONE
ERYONE PETG Galaxy Glitter Filament: Add some sparkle...
£36.95
Ships from: The UKShips from UK to UK only
ERYONE Galaxy Glittering PETG Filament brings a little bling to your prints, made from high quality virgin plastic and with strong colours and a dazzling sparkling finish, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints everytime. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. This is a great filament for making props and cosplay items. No need to try and coat an item with glitter after printing, the glitter finish runs through your print as well, meaning the odd scuff won't leave bald patches.
Quality is at the heart of ERYONE, Founded in 2018, Headquartered in Shenzhen, the heart of Chinese Electronics, ERYONE benefits from direct access to raw material suppliers and young talent.
Features:
Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
High CompatibilityCompatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
Specifications:
Filament Diameter: 1.75mm
Tolerance: ± 0.03mm
Print Temperature: 215-235°C
Recommended Print Temperature: 210-220°C
Peak Melting Temp: 155±5°C>
Heated Bed Temp: 55-70°C
Recommended Print Speed 20-80mm/s
Produced mainly from Corn Starch, eco friendly material.
Net Weight: 1kg (inc spool)
Gross Weight: 1.3-1.4kg
Specific Gravity [g/cm3]: 1.24
MFR [g/10min]: 6
Tensile Strength [MPa]: 61
Elongation at Yield [%]: 3.2
FAQ:
Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.
Geeetech
Geeetech A10M Mix-color 3D Printer 220*220*260mm Build Size...
£268.95
Ships from: The UKShips from UK to UK only
The Geeetech A10M 3D printer is equipped with a dual filament head for creating color-mixed objects and improving your 3D printing experience. Offering a build volume of 220*220*260mm and 0.1mm printing accuracy, the A10M provides users with high-quality results, featuring smooth surfaces, crisp edges, and robust structures. Plus, with its filament detector and resumption capability, the A10M further enhances your 3D printing experience.The well-thought-out extruder of the A10M minimizes the chances of clogging and leakage. Furthermore, the extruder cover boasts 360° ventilation, ensuring effective heat dissipation and delivering high-precision prints. Additionally, the motor of the extruder features a 3:1 speed ratio gear train, which amplifies torque and enhances printing performance. The V-shaped wheels and rails on each axis, made from wear-resistant aluminium profile, reduce the printing noise and offer you a quiet 3D printing experience.
Features:
Builds on the successful A10 single colour version.
Mix-colour printing, with dual filament input design.
220*220*260mm build volume.
With filament detector.
Breaking-resuming capability.
3:1 gear train in extruder motor.
High-adhesion building platform.
Open source GT2560 control board.
Modularized design for easy assembly.
360° ventilation design, enhancing the dissipation of heat.
Plug and play extruder wiring.
V-shaped rails and wheels on each axis.
0.1mm printing accuracy.
Software resources: EasyPrint 3D / On-line firmware upgrade.
Optional add-ons: Auto-levelling Kit
Note: These models are now supplied with a Mylar bed. Not glass
Note: These are supplied with either a GT2560 V4.0 or GT2560 V4.1B motherboard
Note: V4.1B boards required PNP type capacitive switch sensors, using NPN types will damage the board
Please see the 'Info' link at the top of the description for more information.
We will send details of this after purchase, or contact us for more information.
Specifications:
Click to view
Full Specifications
×
Brand:
Geeetech
Model:
A10M
Build Volume:
220*220*260mm8.66*8.66*8.66in
Layer Resolution:
0.1~0.2mm
Max Print Speed:
120mm/s
Filament Diameter:
1.75mm
Supported Filaments:
ABS, PLA, PLA Wood, PVA HIPS, PETG, TPU
Frame:
Aluminium Extrusion
Print Technology:
FDM
XYZ Resolution:
0.011mm, 0.011mm, 0.025mm
Nozzle Diameter:
0.4mm
Max Nozzle Temperature:
250°C
Max Heated Bed Temperature:
100°C
Input Voltage:
100-220v AC
Net Weight:
7.9kg
Gross Weight:
9.9kg
Dimensions:
478*413*482mm18.81*16.26*18.98in
Shipping Dimensions:
530*470*230mm
Connectivity:
USB cable, SD card (support stand-alone printing)
Operating system:
Windows, MAC, Linux
Control software:
EasyPrint 3D, Repetier-Host, Simplify 3D, Cura, Slic3r, etc.
Additional Images:
Click to view
Additional images
×
Sold out
Geeetech
Geeetech A20M Mix-color 3D Printer 255x255x255mm Build Size...
£291.95
Ships from: The UKShips from UK to UK only
The Geeetech A20M 3D printer boasts a dual filament input, single output extruder for mixed colour 3D printing, with a build volume of 255*255*255mm and 0.1mm accuracy. This ensures steady, smooth prints with crisp edges and robust structures. The filament detector and resumption capability enhances user experience, while the extruder minimizes clogging and leakage. The extruder cover and motor feature 360° ventilation and a 3:1 speed ratio gear train, respectively, providing improved heat dissipation and printing performance. The V-shaped wheels and rails are made from wear-resistant aluminium and reduce printing noise for a quieter 3D printing experience.
Features:
Upgraded version of the Geeetech A20 3D printer
Standard printing volume: 255x255x255mm printing size
Support Mix-color print
Break-resuming capability
With Filament Detector
360° ventilation design
Plug and play extruder wiring
Open Source GT2560 control board
Good adhesion and uniform heating
0.1mm high printing accuracy
V-shaped rails and wheels on each axis
Modular design for easy assembly
High-performance gear train of 3:1 speed ratio
Convenient 'Reset' button, one-press action
Software resources: EasyPrint 3D/ On-line firmware upgrade
Optional add-ons: Auto-leveling Kit and 3D WIFI module
Note: These models are now supplied with a Mylar bed. Not glass
Note: These are supplied with either a GT2560 V4.0 or GT2560 V4.1B motherboard
Note: V4.1B boards required PNP type capacitive switch sensors, using NPN types will damage the board
Please see the 'Info' link at the top of the description for more information.
We will send details of this after purchase, or contact us for more information.
Specifications:
Click to view
Full Specifications
×
Brand:
Geeetech
Model:
A20M
Build Volume:
255*255*255mm10.03*10.03*10.03in
Layer Resolution:
0.1mm
Max Print Speed:
120mm/s
Filament Diameter:
1.75mm
Supported Filaments:
ABS, PLA, PLA Wood, PVA HIPS, PETG, TPU
Frame:
Aluminium Extrusion
Print Technology:
FDM
XYZ Resolution:
0.011mm, 0.011mm, 0.025mm
Nozzle Diameter:
0.4mm
Max Nozzle Temperature:
250°C
Max Heated Bed Temperature:
100°C
Input Voltage:
100-220v AC
Net Weight:
8.8kg
Gross Weight:
11kg
Dimensions:
442*447*480mm17.40*17.59*18.89in
Shipping Dimensions:
510*495*305mm
Connectivity:
Wi-Fi (with optional Geeetech 3D WiFi module), USB cable, SD card
Operating system:
Windows, MAC, Linux
Control software:
EasyPrint 3D, Repetier-Host, Simplify 3D, Cura, Slic3r, etc.
Additional Images:
Click to view
Additional images
×
Sold out
NSE Imports
LED Starry Projector Lamp Bluetooth Speaker Galaxy Star...
£33.23
Ships from: The UKShips from UK to UK only
These Galaxy Light Projectors also include a Bluetooth Speaker to give your parties a bit of light and sound. Using a combination of LEDs and Lasers to project a every changing pattern on the ceiling, it produces a nice effect providing a warm atmosphere to any occasion. Music can be played from either your phone, table or computer over Bluetooth, or pop some tunes on a USB stick and insert it in the Projector. The remote control provides various functions to change the lighting and control the music playback.
Specifications:
Modes: 21 Patterns
Input: USB DC5V/2A, Use any 2A Power-bank, Adapter or Charger
Material: Plastic
Green Laser: <1mw
Music: USB, Bluetooth
Remote control power: 2*AAA batteries (not included)
How to use:
Connect to a power source and set on a solid surface.
To connect your phone, activate your Bluetooth connection and look for "BTK10"
The remote control is infrared, please point to the sensor for best results
This product is suitable for indoor use only.
Package Includes: 1 x Music Starry Projector Lamp, 1 x Remote Control, 1 x USB Cable, 1 x User Manual
For best enjoyment, use when playing music, the unit produces some motor noise which is audible when in use without audio.
Sold out
NSE Imports
30pcs 23-37mm Double Flange Watch Band Strap Link...
£0.00
Ships from: The UKShips from UK to UK only
A great little kit for the professional or hobbyist watch repairer. The Double Flange Link Pins should suit most watches with a 23-37mm pin.
Specifications:
100% Brand new and high quality
Easy to install.
Colour: Silver
Material: Stainless steel
Thickness: approx. 1.5mm
Quantity: 30 pieces (15 sizes in total, 2 spring bars of each size)
Sizes (2 of each): 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 37mm
Free Tracked Shipping*
*Some countries may have a small delivery charge due to disproportionately high shipping.Fully secured payments
All our payments are handled by secure methods, we'll never see or ask for your payment details.Friendly service
We pride ourselves on great service, no matter the order value, we want you to be satisfied with it.Contact Us
Downloads & Resources
3D Printers
Digital Microscopes
Digital Oscilloscopes
Game Controllers
IC Programmers
Respirator Mask Advice
We Happily Accept