T76 Programmer and Adapters

The XGecu T76 builds upon the successful T56 and T48 series offering a host of upgrades. With a 48 pin ZIF socket and a 26 pin IO connector the T76 can handle chips with ease. It integrates high performance thanks to it's new 32-bit RISC-V MCU + FPGA architecture, wide compatibility, and user-friendly design, making it the ideal choice for electronic engineers, repair technicians, and DIY enthusiasts. This programmer adopts a USB 3.0 Type-C interface, boasting ultra-fast data transfer capabilities and outstanding stability, saving you valuable time and effort. Please visit our T76 Downloads Page for the latest software, manuals and chip support list. Need additional adapters? Browse our T76 range to find suitable adapters. After purchase we will send links to download the software and manuals. Need additional adapters? Browse our T76 range to find suitable adapters. Please get in touch if you need a chip support list. Kit Contents: T76: Programmer Only Package contains: 1x XGecu T76 Programmer 1x USB 3.0 cable T76: TSOP32/40/48 Adapter Package contains: 1x XGecu T76 Programmer 1x USB 3.0 cable 1x T76_F48_05-001 TSOP32/TSOP40/TSOP48 Adapter T76: TSOP32/40/48/56 Adapter Package contains: 1x XGecu T76 Programmer 1x USB 3.0 cable 1x T76_F56_05-002 V1.0 TSOP32/TSOP40/TSOP48/TSOP56 Adapter T76: 5 Piece Package contains: 1x XGecu T76 Programmer 1x USB 3.0 cable 1x TSOP32/40/48 ZIF adapter (T76_F48_05-001) 1x SOIC8 ZIF adapter, Body width 150 mil (3.9mm-4.1mm) 1x SOIC8-DIP8 ZIF adapter, Body width 200-209mil (5-6mm) 1x SOIC16-SOP16 ZIF adapter (standard 300mil body width SOIC16) 1x 25-in-1 SMD to DIP8 Universal Adapter T76: 11 Piece Package contains: 1x XGecu T76 Programmer 1x USB 3.0 cable 1x TSOP32/40/48 ZIF adapter (T76_F48_05-001) 1x SOIC8 ZIF adapter, Body width 150 mil (3.9mm-4.1mm) 1x SOIC8-DIP8 ZIF adapter, Body width 200-209mil (5-6mm) 1x SOIC16-SOP16 ZIF adapter (standard 300mil body width SOIC16) 1x PLCC44-DIP44 adapter 1x PLCC32-DIP32 adapter 1x PLCC32-DIP28 adapter 1x PLCC28-DIP24 adapter 1x PLCC20-DIP20 adapter 1x PLCC IC extractor 1x 25-in-1 SMD to DIP8 Universal Adapter T76: 13 Piece Package contains: 1x XGecu T76 Programmer 1x USB 3.0 cable 1x TSOP32/40/48/56 ZIF adapter (T76_F56_05-002 V1.0) 1x QFN8 two-in-one adapter (no need to desolder, for both size 6*5MM and 8*6MM chips) 1x SOP20-DIP20 200mil ZIF adapter (Functionally equivalent to 4 adapters: SOP8 200mil, SOP14 200mil, SOP16 200mil and SOP20 200mil) 1x SOP28-DIP28 300mil ZIF adapter (Functionally equivalent to 4 adapters: SOP16 300mil, SOP20 300mil and SOP24 300mil and SOP28 300mil) 1x SOP16-DIP16 150mil ZIFadapter (Functionally equivalent to 3 adapters: SOP8 150mil, SOP14 150mil and SOP16 15mil) 1x TSSOP28-DIP28 170mil ZIF adapter (Functionally equivalent to 5 adapters: SOP8 170mil, SOP16 170mil, SOP20 170mil, SOP24 170mil, SOP28 170mil) 1x PLCC44-DIP44 adapter 1x PLCC32-DIP32 adapter 1x PLCC32-DIP28 adapter 1x PLCC28-DIP24 adapter 1x PLCC20-DIP20 adapter 1x PLCC IC extractor 1x 25-in-1 SMD to DIP8 Universal Adapter T76: BGA153 / BGA169 Adapter and Frames Package contains: 1x XGecu T76 Programmer 1x USB 3.0 cable 1x BGA153/ BGA169 adapter 1x 11.5x13mm frame (already mounted into socket) 1x each 10x11 mm, 12x16 mm, 12X18 mm, 14x18 mm frame Key Features: Ultra-Strong Chip Compatibility: The T76 not only supports common EEPROM, EPROM, and FLASH chips on the market but also features robust microcontroller and programmable logic device (GAL/CPLD) support, with the capability to customize and add new chip models. Whether you're dealing with serial, parallel ROM, SPI NAND, or even EMMC/EMCP chips, the T76 handles them with ease. Supports 26, 27, 28, 29, 37, 39, 49, 50 series parallel ROM, EPROM, EEPROM Supports 24, 25, 35, 45, 85, 93, 95 series serial EEPROM Supports P-NAND FLASH, customizable to add new chip models Supports SPI NAND (SD NAND/SD cards) Supports EMMC/EMCP Supports microcontroller series programming Supports GAL/CPLD programmable logic device programming Supports VGA tool and VGA ISP programming Supports SRAM chip testing High-performance 54/74F/LS/HC CMOS4000 series IC logic test Note: The initial version of the software, features in BLUE have not been added, this will be completed in the subsequent software upgrades, the completion is estimated to be 2-3 months! (Expected date 2024.12.11) New Architecture, Double the Speed: The T76 features a high-performance 32-bit RISC-V MCU + FPGA controller, paired with a high-speed USB 3.0 Type-C interface. This configuration provides data transfer speeds up to 140MB/sec (EMMC 5.1 actual transfer rate), multiple times faster than traditional programmers! Whether you are reading or writing data, you will experience lightning-fast operation. EMMC 5.1 actual transfer rate up to 140MB/sec (8.4GB/minute) SPI NAND read speed up to 18MB/s 64 Gb P-NAND read speed of 30MB/S Superior Performance, Stable and Reliable: The T76 employs a high-density board design and comes with a high-quality USB 3.0 aluminium grey braided cable, ensuring stable and reliable signal transmission. In addition, the T76 offers comprehensive power protection mechanisms, including over-voltage, over-current, reverse connection protection, and low-voltage warnings, allowing you to program with peace of mind, worry-free. 30% more internal components than T56, with a higher density board design Adopts a high-quality USB 3.0 Type-C aluminium grey braided cable for stable and reliable signal transmission VCC voltage adjustable from 1.2V to 6.5V (64-level adjustable), and VPP voltage adjustable from 6.5V to 25V (64-level adjustable) IO communication signal voltage adjustable from 1.2V to 3.6V (64-level adjustable) VCC current limit adjustable from 120mA to 450mA, VPP current limit at 150mA, both with overcurrent protection Supports 5V <1A power supply, with a static power consumption of just 150mA (tested in standby mode) Offers comprehensive external power multi-protection, including over-voltage, reverse connection, over-current, and low-voltage tips Innovative Design, Convenient Operation: The T76 has 76 external IO pins, 48 of which are full-function IO pins and 28 of which are dedicated IO pins. These IO pins simultaneously support high-speed/high-voltage/high-current applications, giving you more flexibility to connect and program various chips. More importantly, thanks to its innovative design, the adapter requirements for the T76 are greatly reduced. One adapter can theoretically support chips with up to 68 pins (included) in the same package, greatly reducing adapter usage cost and complexity. Compact and Portable: Only 12mm x 7mm x 2.8mm, the T76 is lightweight and portable, allowing you to perform chip programming anytime, anywhere. No External Power Supply Required: No external power supply is required for all chip programming operations, making it simple and convenient. Specifications: Powered by a 32-bit RISC-V MCU + FPGA. Supports all chips that are supported by the T48 and T56 48 pin ZIF DIP socket with 26 pin IO port for 76 IO lines Regular software updates from XGECU VCC 1.2 to 6.5 volts in 64 steps VPP 6.5 to 25 volts, ideal for some older chips that require more power IO communication voltage 1.2 to 3.6 volts in 64 steps VCC 120 to 450mA adjustable overcurrent protection VPP 150ma overcurrent protection Power consumption: 5v < 1A Standby power consumption: 150mA External power supply only required if using multiple programmers simultaneously. When using multiple programmers a 5V 1A DC adapter per programmer is required.

Add extra functionality to your XGecu T76 programmer with this BGA64 Adapter. The T76_B64_10-003 adapter allows for reading and programming a wide range of chips in the BGA64 package format, including EMMC packages with your T76 programmer. The heavy duty ZIF socket features precision contacts and is rated for over 10,000 actuations. Please note: This adapter only can work on the XGecu T76 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II T58, or T56. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: Supports BGA64 package chips including EMMC Supported Package sizes: 8x10mm,  9x9 mm, 10x13 mm, 11x13 mm, 12x18 mm Item includes: 1x T76_B64_10-003, One each of 8x10mm (pre-installed),  9x9 mm, 10x13 mm, 11x13 mm, 12x18 mm frames

Add extra functionality to your XGecu T76 programmer with this BGA153 BGA169 Adapter. The adapter allows for reading and programming a wide range of chips in the BGA153/169 package formats, including EMMC packages with your T76 programmer. The heavy duty ZIF socket features precision contacts and is rated for over 10,000 actuations. Please note: This adapter only can work on the XGecu T76 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II T58, or T56. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: Supports BGA153 and BGA169 package chips including EMMC Supported Package sizes: 11.5x13 mm, 10x11 mm, 12x16 mm, 12X18 mm, 14x18 mm Item includes: 1x T76_B64_10-003, One each of 11.5x13 mm (pre-installed), 10x11 mm, 12x16 mm, 12X18 mm, 14x18 mm frames

Add extra functionality to your XGecu T76 programmer with this TSOP32/40/48/56 ZIF Adapter. The T76_F56_05-002 V1.0 adapter allows for reading and programming a wide range of chips in the TSOP package format packages with your T76 programmer. The heavy duty ZIF socket features precision contacts and is rated for over 10,000 actuations. Please note: This adapter only can work on the XGecu T76 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II T58, or T56. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: Supports TSOP32 TSOP40 TSOP48 TSOP56 package chips Supported Package sizes: 8*20mm 10*20mm 12*20mm 14*20mm Item includes: 1x T76_F56_05-002 V1.0, 1x T76 ISP cable.

Add extra functionality to your XGecu T76 programmer with this TSOP32/40/48 ZIF Adapter. The T76_F48_05-001 adapter allows for reading and programming a wide range of chips in the TSOP package format packages with your T76 programmer. The heavy duty ZIF socket features precision contacts and is rated for over 10,000 actuations. Please note: This adapter only can work on the XGecu T76 programmer, it is not for other programmers such as the TL866CS, TL866A, TL866II T58, or T56. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Looking for other T76 adapters? View our T76 range, need DIP8 adapters instead? View our DIP8 adapter range, if we don't have the one you're looking for please get in touch. Features: Supports TSOP32 TSOP40 TSOP48 package chips Supported Package sizes: 8*20mm 10*20mm 12*20mm Item includes: 1x T76_F48_05-001