ERYONE Mini Rainbow PLA 3D Printer Filament: More Frequent Changes Than Regular Rainbow Filaments

ERYONE Mini Rainbow PLA Filament brings some multicolour action to your prints, with color changes every 9-11m of filament, you get more frequent changes of colour, each print will be unique, it produces models with a very high quality, colour packed finishes.

Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more. 

Degradable and environmentally friendly, ERYONE filament is made from eco-friendly corn starch and the PLA itself can be recycled.

Features:

• Color circulation: Red-Orange-Yellow-Green-Teal-Blue-Purple-Red
• Most rolls should start with Red but some may not due to spooling variances
• Shorter colour transactions, about 9-11m best seen on larger prints
• Stable Printing: Neatly rolled, high quality.
• Little Clogging: The diameter is strictly controlled at 1.75±0.03mm.
• Professional Packaging, Vacuumed Sealed: ERYONE filament is supplied in a sealed vacuum bag with a desiccant bag, keeping it dry and free from dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
• High Compatibility: Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.

Specifications:

• Filament Diameter: 1.75mm
• Finish: Awesome Rainbows
• Tolerance: ± 0.05mm
• Print Temperature: 190-215°C
• Recommended Print Speed: 30-60mm/s
  
• Heated Bed Temp: 55-70°C
• Gross weight: 1.35kg (approx)
• Net Weight: 1kg (approx)

FAQ:

• Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
• Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
• Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.