3D Printer Auto Levelling Kits

The Two Trees Auto Touch Module is a BL-Touch compatible upgrade that can be installed on many 3D printers to improve bed leveling accuracy. This can lead to improved print quality and reduced failure rates. The Auto Touch Module uses a hall effect sensor to measure the distance between the print head and the heated bed. This information is used to automatically adjust the Z-axis height during printing, ensuring that the first layer is always laid down correctly. The Auto Touch Module is easy to install and use. Simply mount the sensor to your printer, connect the wires, and enable the auto leveling feature in your printer's firmware. Features: Automatic bed leveling Hall effect sensor Easy to install and use Improves print quality Reduces failure rates Specifications: Voltage: 5V Current: 15mA Max Current(Peak): 300mA Shell Material: PC Cable Length: short 200mm long 1000mm Standard Package Included:1* Leveling Sensor1* 200mm Cable1* 1000mm Cable2* M3 nuts and screws2* XH2.54mm Terminals1* Coiling Terminal Wiring: 3 Pin:Green: GND Red: +5V Orange: Signal Cable 2 Pin:Black: GND White: Z-min Technical Information: Click to view Technical Information ×

Building on their previous model Geeetech have gone back to the drawing board and released this new and updated auto bed level sensor for 3D Printers. The 3D touch v3.2 Pro is a new generation of FDM 3D printer hot bed automatic levelling accessory. It is compatible with glass, wood, metal and other materials of hot bed, bringing you a simpler and faster hot bed levelling experience, improving the success rate of 3D printing. The probe of 3D touch V3.2 Pro has an accuracy deviation within 0.005mm, offering you a higher precision and stability than older metal probes.  The 3D Touch v3.2 Pro adopts a high sensitivity Hall sensor, compared with capacitive sensor or inductive sensor, it is not affected by the hot bed material, allowing you to use it on glass, metal, plastic and other common material hot beds without interference concerns.  Geeetech test each 3DTouch v3.2 Pro for accuracy before leaving the factory, only the products that meet their accuracy standards are allowed to be sold.  Compatible with most Geeetech FDM style printers that accept BL-Touch style sensors, other brands such as Creality, Artillery, Sunlu, Prusia, Easythreed with BL-Touch support should be able to use this sensor but may need firmware updates and a printed mount. Wiring: 3-pin: Brown (-, GND), Red (+5V), Orange (control signal) 2-pin: Black (-, GND), White (Z min) Features： New structural design, higher precision Suitable for various materials hotbeds New industrial design New surface treatment High precision, accuracy deviation is ±0.005mm Automatic detection after power on Abnormal alarm More stable and reliable Intelligent measurement Included Parts: 3D-touch: 1, M3 screws: 4, M3 nuts: 2, Metal holder: 1, 18cm cable: 1, 100cm cable: 1 Power supply: DC 5V, Current:15mA～300mA