3d printer accessories

Repair or build your 3D printer belt drives with these high-quality timing pulleys. Suitable for use with most belt-driven printers using the same size pulley, including but not limited to: Creality Artillery Sunlu Geeetech Prusa Makerbot This great value pack of 10 is ideal for keeping spares on hand or starting your own build. GT2 pulleys are designed for linear motion. With a rounded tooth profile, it ensures the belt tooth fits smoothly and precisely in the groove. Specifications: Tooth Count: 16T Material: Aluminium Bore: 3mm Width of Gear: 6mm Package Includes: 3 x GT2 Aluminium timing belt pulleys

This tensioner is designed to be a drop-in replacement or upgrade for most FDM printers using 2020 V-slot framework. It allows you to fine-tune your X-axis belt, ensuring it is straight and enabling smoother travel motion. Specifications: Application: 2020 aluminium profile X-axis belt tensioner Material: Aluminium alloy Surface treatment: Anodizing Suitable for: Creality CR-10, CR-10S, Ender-3 and other FDM 3D printers Size: See images for dimensions Package includes: 1 x X-axis belt tensioner

These replacement pulleys are made from high quality POM (Polyoxymethylene/acetal) and are suitable for use with most V-Slot style printer frames, such as Creality Ender and CR, Artillery Sidewinder and Genius, Geeetech, Prusa series printers. Features: Made from high quality POM (Polyoxymethylene/acetal) Suitable for most V-Slot style printer frames Comes with 625ZZ bearings Easy to install Specifications: Type: Pulley Outside Diameter: 24mm approx. Bore: 5mm Thickness: 10.23mm approx. Size: about 241610.23mm Material: POM (Polyoxymethylene/acetal) With Bearings: Yes Bearing: 625ZZ Bearings Pack includes: 5x Big Pulley Wheel

The BL-Touch Auto Bed Levelling Sensor is a popular upgrade for 3D printers. It uses a sensor to measure the distance between the print head and the heated bed, and then automatically adjusts the Z-axis height during printing. This ensures that the first layer is always laid down correctly, even if the bed is not perfectly level. The BL-Touch is easy to install and use. Simply mount the sensor to your printer, connect the wires, and enable the auto levelling feature in your printer's firmware. Features: Automatic bed levelling High precision Easy to install and use Improves print quality Reduces failure rates Specifications: Voltage: 5V Current: 15mA Maximum(Peak) Current: 300mA Case Material: Polycarbonate(PC) Case Colour: Semi-transparent White Cable Length: 150mm PCB & Soldering: RoHS, Lead Free (Pb Free) Package Included: 1 x ANTCLABS BLTouch Auto Bed Levelling Sensor 2 X Dupont Housing Shell 3Pin 2 X Dupont Housing Shell 2Pin 2 X Dupont Housing Shell 1Pin 10 X Dupont Terminal 1 X Jumper Cap With Screw & Nut & Washer Manual and More Info RAMPS1.3/1.4, MKS-Gen V1.3, MKS-Base V1.4, etc. installation: Click Here MKS-Base V1.2, mini-Rambo, etc. installation: Click Here 32bit board installation: Click Here Setup Manual: Click Here Marlin Manual Click Here

Upgrade or swap out your existing 3D Printer Nozzles for these top-notch Creality 3D nozzles. Compatible with most M6 threaded Creality 3D printers, including Ender series models; also compatible with Artillery, Geeetech, and Prusa printers featuring M6 thread hotends. Please check the images for the measurements to ensure these wil match your existing nozzles. After fitment, re-calibrate your Z axis levels to ensure a smooth print. Specifications: Material: Brass Size: 13mm*6mm Weight: 2g Nozzle thread: M6 Nozzle size: 0.4mm (Standard Size), 0.2mm, 0.3mm, 0.5mm, 0.6mm, 0.8mm and 1.0mm Package Included: 5x Creality 3D® Nozzles of size selected

The Two Trees Auto Touch Module is a BL-Touch compatible upgrade that can be installed on many 3D printers to improve bed leveling accuracy. This can lead to improved print quality and reduced failure rates. The Auto Touch Module uses a hall effect sensor to measure the distance between the print head and the heated bed. This information is used to automatically adjust the Z-axis height during printing, ensuring that the first layer is always laid down correctly. The Auto Touch Module is easy to install and use. Simply mount the sensor to your printer, connect the wires, and enable the auto leveling feature in your printer's firmware. Features: Automatic bed leveling Hall effect sensor Easy to install and use Improves print quality Reduces failure rates Specifications: Voltage: 5V Current: 15mA Max Current(Peak): 300mA Shell Material: PC Cable Length: short 200mm long 1000mm Standard Package Included:1* Leveling Sensor1* 200mm Cable1* 1000mm Cable2* M3 nuts and screws2* XH2.54mm Terminals1* Coiling Terminal Wiring: 3 Pin:Green: GND Red: +5V Orange: Signal Cable 2 Pin:Black: GND White: Z-min Technical Information: Click to view Technical Information ×