3D Printer Accessories (38)

Upgrade your Creality Ender-3, Ender-3 Pro, Ender-5, CR-10, CR-10S Printer with this Creality Branded Metal Extruder Upgrade Kit, tougher than the stock plastic one, it will not only improve your extruders feed system but add some bling to your printer. :) Specifications: Suits MK8 extruder parts Suits Creality Ender-3, Ender-3 Pro, Ender-5, CR-10, CR-10S printers(may fit other models with MK8 extruders) Color: Silver Material: Aluminum Alloy Suitable Consumables: 1.75mm Filament Package Includes: MK8 extruder metal block*2 Spring*1 Screw *7 Spring*1 Pneumatic connector*1 Buckle*1 Gear*1 Bearing*1 Pin*2

Upgrade or replace your 0.4mm 3D Printer Nozzles with these high quality Copper Creality 3D branded one, suitable for most Creality 3D printers with an M6 thread, such as their Ender series. Will also foit other brands such as Artillery, Geeetech, Prusa etc.. that feature M6 thread hotends. Specifications: Material: Copper Size: 13mm*6mm Weight: 2g Nozzle thread: M6 Nozzle accuracy: 0.4mm Package Included: 5x Creality 3D® 0.4mm Nozzle

As most filaments are made from plastic, they are often statically charged and attract all sorts of debris from around your filament storage or work space. The anti-static filament cleaner wipes lint, dust, or other dirt before the filament enters your printer's valuable extruder and nozzle. The use of the Filament Cleaner Block can help prevent your nozzle from being blocked by a build-up of debris and extend your nozzle's and hot-end's useful life. As the filament is pulled through the cleaner block, dust, hair, small plastic, or other material shavings are wiped off the surface of the filament. As hot-ends, extruders and nozzles are getting more and more sophisticated and monolithic, repair or replacement is costly and also can incur quite some printer down-time. This filament cleaner prevents all this and keeps you printing without interruption. Specifications Name: Filament Cleaner Material: Plastic Size: 15*30mm Color: Black Compatible for: 1.75mm or 3.0mm Filament Package list： Selected Quantity of Filament Cleaners

The Two Trees Auto Touch Module, provides a BL-Touch compatible upgrade to many 3D printers to assist with bed levelling issues. A flat bed is one of the most critical things for a successful 3D print, an uneven bed can cause issues with the first layers not sitting on the bed correctly. There is also the issue of the bed becoming slightly out of line after a long or large print. Once installed and set up your 3D printers can allow and adjust for the slight variances to ensure optimum printing conditions and reduce failure rates from a slightly off bed level.Installation varies between printers, however the general principle is similar enough. Firstly mount the 3D Touch unit to your printer (you may need to print a mount). Secondly hook up the connections (a lot of printers have a 'BL-Touch' connector on the extruder assembly, some older ones may require wiring to the mainboard. Finally activate the 'Auto Level' feature in a menu or through updating the firmware. Features: The Auto Levelling sensor is a device that uses the hall effect to achieve levelling. The Position of the point can be obtained by touching the point on the heated bed and then compensated by adjusting the Z axis height during printing Printing can also be achieved even though the heated bed is not flat Specifications: Voltage: 5V Current: 15mA Max Current(Peak): 300mA Shell Material: PC Cable Length: short 200mm long 1000mm Package Included:1* Leveling Sensor1* 200mm Cable1* 1000mm Cable2* M3 nuts and screws2* XH2.54mm Terminals1* Coiling Terminal Wiring: 3 Pin:Green: GND Red: +5V Orange: Signal Cable 2 Pin:Black: GND White: Z-min Example Configuration ⠀ Return to top

This high quality Creality 3D Y-Axis Belt is ideal for replace worn or broken belts on their Ender-3 series 3D Printers. It should also fit similar design printer that use GT2 pulleys and gears. Specifications: Type: GT2 6mm Belt GT2 Pitch: 2mm Material: Rubber Length: 743mm Width: 6mm Shape: Open timing belt Fit for: Creality Ender-3 Y-axis Package included: 1x Creality 3D® 2GT-6mm Rubber Opening Belt

Upgrade or repair your printers Z-Axis thread mount with this high quality replacement. Ideal if your repairing at V-Slot frame 3D Printers such as a Creality 3D CR-10, Enter-3, Ender-3 Pro or similar. Features: Name: Aluminium Z-axis lead screw top mount Material: aluminium alloy Apply: Z-Axis lead screw top mount Package Includes:1 x Z-axis with screw bearing housing2 x Screw2 x Boat nut1 x Bearing1 x Top wire

Upgrade your Creality Printer with this high quality glass platform, with it's high quality micropore coating your models have a smooth yet slightly gripped surface to print on yet easily removable at the end of the print. Suitable for most Creality 235mm square printers, will likely suit other brands of 3D printer with a similar size print surface.Features: Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large model. Ultrabase integrated with heated bed: Super Flatness, Fast and uniform heating. Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400°C. Easy to clean: Ultrabase is easy to clean by alcohol/water. Note: Due to the different product batches, the position of the logo in the glass plate may change, thank you for your understanding. Specifications: Size: 235*235*3mm Material: Tempered glass Application: For Creality Ender-3 / Pro 3D printer Package Included: 1x Creality 3D® Glass Platform Temperature Settings For Different Filaments: PLA: 50-65°C ABS: 80-120°C PC: 100-125°C Nelon: 100-130°C PP: 100-130°C PETG: 70-90°C TPU: 40-60°C

Upgrade or repair your 3D Printer's pulley wheels with these high quality TEVO Pulleys made from POM (Polyoxymethylene/acetal), they are suitable for use with most V-Slot style Printer Frames, such as Creality Ender and CR, Artillery Sidewinder and Genius, Geeetech, Prusa series printers. Specifications: Type: Pulley Outside Diameter: 24mm approx. Bore: 5mm Thickness: 10.23mm approx. Size: about 24*16*10.23mm Material: POM (Polyoxymethylene/acetal) With Bearings: Yes Bearing: 625ZZ Bearings Pack includes: 10x Big Pulley Wheel

These original BL-Touch upgrades fit many 3D printers. A flat bed is one of the most critical things for a successful 3D print, an uneven bed can cause issues with the first layers not siting on the bed correctly. There is also the issue of the bed becoming slightly out of line after a long or large print. Once installed and set up your 3D printers can allow and adjust for the slight variances to ensure optimum printing conditions and reduce failure rates from a slightly off bed level.Installation varies between printers, however the general principle is similar enough. Firstly mount the BL-Touch unit to your printer (you may need to print a mount). Secondly hook up the connections (a lot of printers have a BL-Touch connector on the extruder assembly, some older ones may require wiring to the mainboard. Finally activate the 'Auto Level' feature in a menu or through updating the firmware. Features: Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed levelling sensor, Gathering information & setting up your firmware will be an easy task. Smart - Self-test and alarm High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, very high precision. Specifications: Voltage: 5V Current: 15mA Maximum(Peak) Current: 300mA Case Material: Polycarbonate(PC) Case Colour: Semitransparent White Cable Length: 150mm PCB & Soldering: RoHS, Lead Free (Pb Free) Package Included: 1 x BLTouch Auto Bed Levelling Sensor 2 X Dupont Housing Shell 3Pin 2 X Dupont Housing Shell 2Pin 2 X Dupont Housing Shell 1Pin 10 X Dupont Terminal 1 X Jumper Cap With Screw & Nut & Washer Please note: The mainboard shown in images is NOT included Manual and More Info ⠀ RAMPS1.3/1.4, MKS-Gen V1.3, MKS-Base V1.4, etc. installation: Click Here MKS-Base V1.2, mini-Rambo, etc. installation: Click Here 32bit board installation: Click Here Setup Manual: Click Here Marlin Manual Click Here

Replace your older or faulty TMC2100 Stepper Driver with these new smoother TMC2208 Stepper Drivers, a direct drop in replacement for the TMC2100 they will benefit any 3D Printer you fit them to. Featuring a flexible microPlyer interpolation unit, the driver can provide up to 256 micro-steps / step resolution, even if the pulse rate is limited these can still be perfect to achieve sinusoidal control; Both components have pulse / direction input, and benefit from completely independent operation. The configuration is implemented via digital input. Features: TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V Precise 256 subdivisions Can replace the original TMC2100 Lower heat than the TMC2100 For more information about the TMC2208 see click here Package included: 1 x TMC2208 Stepper Motor Driver

A4988 is a complete micro-stepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the 'step' input inputting one pulse drives the motor one micro-step. A4988 interface is very suitable for complex microprocessor is unavailable and is overburdened.In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, under-voltage lockout (UVLO), and crossover-current protection. Special power sequencing.A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin lead frame plating. Features: Simple step and direction control interface Short-to-ground and shorted-load protection Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Package included: 1 x Step motor driver module, 1 x Heatsink

These eccentric spacers are handy for anyone looking to repair or build a 3D Printer, made from stainless steel they are light and durable. Features and Specifications: Eccentric Spacers have a 5mm bore and can be adjusted with a 10mm Wrench For V Wheel Aluminium Extrusion 3D Printers Material: Stainless Steel Bore: 5mm Dimensions: See images for full dimensions Package Included: 10 x Eccentric Spacers

Save wear and tear on your expensive 3D printer's SD card slot with the handy Transflash (TF) / Micro SD to SD card adapter. Simply plug the dummy micro SD connector into your printer and then use the included full size SD card in the slot at the end of the extension. Comes complete with everything pictured.While marketed for 3D printers these are also ideal for many jobs where you may need to have easy access to a card. Mobile phone repairs, Game Console Mods, Flash carts, Cameras, SCSI-to-SD, IDE-to-SD, GDEMU, SD2SP2 or similar devices are among others uses it could be put to. Basically if it has a TF/Micro SD slot and you are always swapping cards around maybe this will help you. Features: Save wear and tear on your devices Micro SD / Transflash (TF) slot Make your SD Card more accessible, great for frequent card changes Ideal for many use cases Specifications: Cable length: 48cm (approx) Package includes*: 1 x TF/Micro SD to SD Converter with 48cm ribbon, 1x 8GB SD Card, 1x TF/Micro SD Card Reader, 1x 8GB TF/Micro SD Card.*Please note: Exact contents may vary in appearance but are all functionally identical