Geeetech (8)

Geeetech Glow In The Dark 3D Printer Filament is ideal for making Halloween Props, Nightlight and much more. Once printed, let the part sit in the light for a few hours and when placed in the dark it will glow. The glow can be charged from Lightbulb, Sunlight or UV light, best and brightest results come from UV, then Sunlight, then Bulbs. Suitable for for printing with most FDM style 3D Printers with a heated bed. Specifications: Filament diameter : 1.75mm ±0.3mm Print Temperature Range 190 - 230°C Recommended Print Temperature: 220°C Printer Bed Temperature: 50 - 70°C Material: PLA Colour: Luminous Green, Orange, White, Blue, Yellow, Purple, Rainbow, Rose Red Net Weight: 1kg Gross Weight:1.4kg

Building on their previous model Geeetech have gone back to the drawing board and released this new and updated auto bed level sensor for 3D Printers. The 3D touch v3.2 Pro is a new generation of FDM 3D printer hot bed automatic leveling accessory. It is compatible with glass, wood, metal and other materials of hot bed, bringing you a simpler and faster hot bed leveling experience, improving the success rate of 3D printing. The probe of 3D touch V3.2 Pro has an accuracy deviation within 0.005mm, offering you a higher precision and stability than older metal probes.  The 3D Touch v3.2 Pro adopts a high sensitivity Hall sensor, compared with capacitive sensor or inductive sensor, it is not affected by the hot bed material, allowing you to use it on glass,metal, plastic and other common material hot beds without interference concerns.  Geeetech test each 3DTouch v3.2 Pro for accuracy before leaving the factory, only the products that meet their accuracy standards are allowed to be sold.  Compatible with most Geeetech FDM style printers that accept BL-Touch style sensors, other brands such as Creality, Artillery, Sunlu, Prusia, Easythreed with BL-Touch support should be able to use this sensor but may need firmware updates and a printed mount. Wiring: 3-pin: Brown (-, GND), Red (+5V), Orange (control signal) 2-pin: Black (-, GND), White (Z min) Features： New structural design, higher precision Suitable for various materials hotbeds New industrial design New surface treatment High precision, accuracy deviation is ±0.005mm Automatic detection after power on Abnormal alarm More stable and reliable Intelligent measurement Included Parts: 3D-touch: 1, M3 screws: 4, M3 nuts: 2, Metal holder: 1, 18cm cable: 1, 100cm cable: 1 Power supply: DC 5V, Current:15mA～300mA

Building on their previous model Geeetech have gone back to the drawing board and released this new and updated auto bed level sensor for 3D Printers. The 3D touch v3.2 Pro is a new generation of FDM 3D printer hot bed automatic leveling accessory. It is compatible with glass, wood, metal and other materials of hot bed, bringing you a simpler and faster hot bed leveling experience, improving the success rate of 3D printing. The probe of 3D touch V3.2 Pro has an accuracy deviation within 0.005mm, offering you a higher precision and stability than older metal probes.  The 3D Touch v3.2 Pro adopts a high sensitivity Hall sensor, compared with capacitive sensor or inductive sensor, it is not affected by the hot bed material, allowing you to use it on glass,metal, plastic and other common material hot beds without interference concerns.  Geeetech test each 3DTouch v3.2 Pro for accuracy before leaving the factory, only the products that meet their accuracy standards are allowed to be sold.  Compatible with most Geeetech FDM style printers that accept BL-Touch style sensors, other brands such as Creality, Artillery, Sunlu, Prusia, Easythreed with BL-Touch support should be able to use this sensor but may need firmware updates and a printed mount. Wiring: 3-pin: Brown (-, GND), Red (+5V), Orange (control signal) 2-pin: Black (-, GND), White (Z min) Features： New structural design, higher precision Suitable for various materials hotbeds New industrial design New surface treatment High precision, accuracy deviation is ±0.005mm Automatic detection after power on Abnormal alarm More stable and reliable Intelligent measurement Included Parts: 3D-touch: 1, M3 screws: 4, M3 nuts: 2, Metal holder: 1, 18cm cable: 1, 100cm cable: 1 Power supply: DC 5V, Current:15mA～300mA

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. These triple packs offer gret value for stocking up or larger print runs. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional images: Click to view Additional images ×

The Geeetech A10M 3D printer is equipped with a dual filament head for creating color-mixed objects and improving your 3D printing experience. Offering a build volume of 220*220*260mm and 0.1mm printing accuracy, the A10M provides users with high-quality results, featuring smooth surfaces, crisp edges, and robust structures. Plus, with its filament detector and resumption capability, the A10M further enhances your 3D printing experience.The well-thought-out extruder of the A10M minimizes the chances of clogging and leakage. Furthermore, the extruder cover boasts 360° ventilation, ensuring effective heat dissipation and delivering high-precision prints. Additionally, the motor of the extruder features a 3:1 speed ratio gear train, which amplifies torque and enhances printing performance. The V-shaped wheels and rails on each axis, made from wear-resistant aluminium profile, reduce the printing noise and offer you a quiet 3D printing experience. Features: Builds on the successful A10 single colour version. Mix-colour printing, with dual filament input design. 220*220*260mm build volume. With filament detector. Breaking-resuming capability. 3:1 gear train in extruder motor. High-adhesion building platform. Open source GT2560 control board. Modularized design for easy assembly. 360° ventilation design, enhancing the dissipation of heat. Plug and play extruder wiring. V-shaped rails and wheels on each axis. 0.1mm printing accuracy. Software resources: EasyPrint 3D / On-line firmware upgrade. Optional add-ons: Auto-levelling Kit Note: These models are now supplied with a Mylar bed. Not glass Note: These are supplied with either a GT2560 V4.0 or GT2560 V4.1B motherboard Note: V4.1B boards required PNP type capacitive switch sensors, using NPN types will damage the board Please see the 'Info' link at the top of the description for more information. We will send details of this after purchase, or contact us for more information. Specifications: Click to view Full Specifications × Brand: Geeetech Model: A10M Build Volume: 220*220*260mm8.66*8.66*8.66in Layer Resolution: 0.1~0.2mm Max Print Speed: 120mm/s Filament Diameter: 1.75mm Supported Filaments: ABS, PLA, PLA Wood, PVA HIPS, PETG, TPU Frame: Aluminium Extrusion Print Technology: FDM XYZ Resolution: 0.011mm, 0.011mm, 0.025mm Nozzle Diameter: 0.4mm Max Nozzle Temperature: 250°C Max Heated Bed Temperature: 100°C Input Voltage: 100-220v AC Net Weight: 7.9kg Gross Weight: 9.9kg Dimensions: 478*413*482mm18.81*16.26*18.98in Shipping Dimensions: 530*470*230mm Connectivity: USB cable, SD card (support stand-alone printing) Operating system: Windows, MAC, Linux Control software: EasyPrint 3D, Repetier-Host, Simplify 3D, Cura, Slic3r, etc. Additional Images: Click to view Additional images ×

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top

Geeetech PLA 3D printer filament is universally developed and compatible with most 3D printers for 1.75 mm filament, with a dimensional accuracy of +/- 0.02 mm. PLA, is environmentally friendly, no small household pressure. As a result, it is very popular in the 3D printing industry. It is easy to use, can either be heat bed printed or not. Geeetech are an international company that has distinguished itself for many years in developing the 3D printing industry. Our main products are 3D printers and 3D printing accessories.After opening the package, do not expose to fire or direct sunlight; store in a ventilated and dry place. To avoid clogging the nozzles, remove the filament from the extruder if you will not be using the printer for a long time. Keep it in a cool and dry place. Protect from UV light. We recommend inserting the end of the filament into the holes provided on the spool to avoid tangling. You can choose from a variety of colours to find at least one colour to satisfy your wonderful illusion of 3D printing. You will enjoy the wonderful experience our PLA filament offers printing a designed module and sometimes you can finish interesting work with children. of the wonderful experience of our PLA. Features: High quality fresh filament, not recycled. Vacuum Packed for freshness Suitable for printers such as; EasyThreed , Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D, Creality, Artillery, Geeetech, SUNLU etc..... Specifications: Material PLA ABS PETG Printing Temp 190-220°C 220-240°C 230-250°C Density 1.25±0.05g/cm³ 1.04±0.2g/cm³ 1.23g/cm³ Length 330±10m 400±10m 325±10m Strength ≥60Mpa 43Mpa 53Mpa Diameter 1.75mm ±0.2mm Bubble 100% Bubble Free Net Weight 1kg Gross Weight 1.3kg (approx) Environment friendly Yes No Yes Heated Bed Required Not necessary 80-120°C 75-90°C Properties Meets food grade requirementsBiodegradableGood StickinessOdorlessStiffness and Strength High temperature resistanceGood impact and wear resistanceGood toughness Environmentally friendlyOdorlessSmooth dischargeNot easily blocked or broken Additional Images ⠀ Return to top