DANIU (3)

These large magnetic desk mats are the ideal companion for those who spend their day with a soldering iron in their hand. With dedicated areas to store your parts and tools, you'll be to work faster, smarter and safer. The heat resistant mat means no mores burnt desks and workbenches. The magnetic ares prevent your parts and tools moving around by themselves. Features: Multi-function silicone pad structures with a circuit board location, screw location, 3 parts compartments with covers, a magnetic tools area, 3 magnetic parts areas, 7 non-magnetic parts areas, a scale ruler, and 42 spare cells. Screw Location with 124 tiny cells, can place and secure 124 different screws in order. High Temperature Resistance, up to 500 °C. Several hole location to set screws, IC chips and small parts. Built-in scale ruler (0 ~ 36 cm) along the bottom edge. Magnetic sections (marked on the pad), can be used to hold screws firmly. They can also be used to magnetise your screwdrivers. Specification: Type: Heat insulation pad Net weight: 655 g Size: 45 x 30 cm / 17.7 x 11.8 inch Thickness: about 5 mm Heat resistance: 500 °C Material: Environmentally friendly organic-silicone Colour: Blue Please Note: The pad may have some stuck dust or other minor appearance defects from new.

The DANIU LCR-TC1 is a versatile and easy-to-use component tester that is perfect for electrical repair technicians and hobbyists. It features a clear and easy-to-read color screen, making it easy to quickly test a wide range of components for values and failures. The 14 pin ZIF socket allows for quick, easy, and hassle-free testing. Simply pop your component in and close the handle, and the unit will test the part and provide feedback on its results. The DANIU LCR-TC1 is also equipped with an IR sensor that can be used to diagnose infrared remote controls. Simply point the remote control at the tester and press a button to see if it responds. Features: Detects NPN and PNP transistors, capacitors, resistors, diodes, triodes, N-channel and P-channel MOSFETs, IGBTs, JFETs, triacs, and batteries Detects infrared wave forms Can detect Zener diodes and has a self-calibration function For IR detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decodes it, it will display the data code and infrared wave form. Easy to use with one-button operation Put the pins of component in corresponding area, then close the handle and the detector will test it automatically 14 pin ZIF socket for quick and easy testing Color screen for clear and easy readings Specifications: Display: 1.8inch TFT Screen Diode Range: < 4.5V Zener Diode:Transistor Detect Area: 0.01-4.5V Zener Diode Detect Area: 0.01-30V Triac Range: IGT < 6mA Capacitance: 25pF-100mF Resistor: 0.01-50MΩ Inductance: 0.01mH-20H Battery: 0.1-4.5V Power Mode: Rechargeable Lithium Battery (INCLUDED) Item Size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in Item Weight: 111.5g / 3.94oz Package Size: 14.5 x 12 x 2.7cm / 5.71 x 4.73 x 1.06in Package Weight: 114g / 4.02oz Packing included: 1 x Multi-functional TFT Transistor tester, 1 x Electronic component set(Sent Randomly), 3 x Test hooks Operating Overview: Click to view Full Specifications ×