TL866II PLUS with SPI Driver MiniPro Universal High Speed USB Programmer High Performance TL866 Updated
TL866II PLUS with SPI Driver MiniPro Universal High Speed USB Programmer High Performance TL866 Updated
This bundle only contains the Programmer and SPI driver harness. If your require a more complete bundle see our related items.
This programmer features high-performance and integrated MCU. It may be one of the fastest integrated development programmers, the speed has meets the needs of small-quantity efficient production. The whole programmer is equipped with the ultra-low power chips powered via the USB Interface, power consumption is less than 20mA (it is 7mA when the programmer is not programming)
Furnished with the independent Grade 3 overcurrent protection and the protection of automatically cutting off power supply. Each pin of 40-pin programming socket has VPP overvoltage protection. It can effectively prevent from putting a chip in the wrong place or short circuit due to other reason. It can also stop VPP high voltage from coming back to the internals of the programmer and damaging the device.
40 pin universal chip support, able to handle a wide range of chip types. The programmer can be updated to support new chip styles through the included software. There are more functions than be easily listed here, please see the Specification tab for more information.
- Comes with SPI Driver board and harness.
- Program, Read, Write and Test chips while in-circuit ICSP.
- Supports over 15000+ types of ROM, EPROM, EEPROM, NAND, GAL, SRAM, EMMC, AVR, MCU etc....
- Our optional Adapter Kit enables you to program even more chip styles.
- Can attach upto 4 programmers to on PC for small batch runs.
- AVR series single-chip high speed programming. PIC series 8-bit microcontroller programming
- Serial 24/25/35/45/93 series programming. High-performance BIOS programmer
- Car computer chip programming.
- Support WIN2000, WINXP, WIN2003, WIN2008, WIN VISTA, WIN7, WIN8, WIN10(32&64 bit)
- See our Resource tab for Software, Manuals and Support List
- Support simultaneously burn with 4 Programmers each computer.
- The Minimum Volume and the lowest Power Consumption and Do not Feel any Heat in Process.
- All chips do not need external power supply, the low power consumption of its own to ensure that the USB port can provide enough power.
- Best internal 40 pin over voltage protection, the strongest VCC/VPP 4-level overcurrent protection. The short-circuit do not reset the PC.
- Wide range of chip 15000+ support, support for serial and parallel series 40/44/48PIN large capacity FLASH
- Unique serial ICSP interface. supporting the serial download and high-speed parallel high voltage programming. Note: TL866CS does not support ICSP
- Test CMOS4000 74/54 series integrated circuit. Can be located in the gate circuit error.
- Chip auto serial number is the most complete and practical.
- Original chip encryptionoperation on AVR microcontroller with internal RC Calibration byte. The Decrypt software can not be directly run on another same type of chip.
- 15000+ supported devices from hundreds of manufacturers by 7.05 version of SW (Mar. 1th, 2018).
- NAND FLASH: Samsung K9xxx, SK Hynix (ex Hynix) HY27xxx, H27xxx, Micron MT29Fxxx, NANDxxx, Spansion S34xxx, NAND Toshiba TH58NVGxxx.
- Serial NAND FLASH: Micron MT29Fxxx.
- Serial Flash: standard SPI, high performance Dual I/O SPI and Quad I/O SPI (25Bxxx, 25Dxxx, 25Fxxx, 25Lxxx, 25Pxxx, 25Qxxx, 25Sxxx, 25Txxx, 25Uxxx, 25Vxxx, 25Wxxx, 25Xxxx, 26Vxxx, 45PExx, MX26Lxxx ).DataFlash (AT45Dxxx, AT26Dxxx)
- Parallel NOR Flash: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, Samsung'sK8Pxxxx, K8Dxxxx series, ...
- EPROM: NMOS/CMOS, 27xxx and 27Cxxx series
- EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series,
- Serial E(E)PROM: 24XXX,25XXX series,
- Microcontrollers MCS51 series:89Cxxx, 89Sxxx, 89EXXX,89VXX
- Microcontrollers Atmel AVR 8bit/16bit: AT90Sxxxx, ATtiny, ATmega series
- Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, PIC24xxx series
- GAL Programmable logic device programming and SRAM test
- I.C. Tester: TTL type: 54,74 S/LS/ALS/H/HC/HCT series; CMOS type: 4000, 4500 series; Static RAM: 6116 ..
Second development function of chip serial number: This programmer has a variety of automatic numbering functions that are used commonly. You can get any serial number through DLL Dynamic Link Libraries by using the custom algorithm. In mass production, the function enables each chip to produce only one identifying information that can be encrypted by the custom algorithm. So you can effectively protect your rights as a customer.
Unique universal serial programming interface ICSP: This TL866ll Plus programmer can program through the 40-PIN universal socket and is provided with an ICSP serial programming port. For some in-circuit serial programmable chips, you can program MCU by choosing ICSP port. You can get the clear instruction diagram in the programming software for the ICSP port wiring method. That is to say, you can directly program and update the chip soldered on the board.
Note: Now ICSP can in-circuit serial program ATMEL89S51, ATMEL89S52, AT45DBxxx, a whole series of AVR ATMEGAxxx, MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx, as well as a full serial of SYNCMOS SM59Dxx SM59Rxx. The variety of microcontroller that can be supported in-circuit programming will be continually increased in the future. Six ICSP wires of this programmer, except a ground wire, other wires led full functional I2C, SPI and UART serial main wire, be suitable for all kinds of serial communication. In addition, each wire can supply VCC, VPP or GND with high current.
54/74F/LS/HC CMOS4000 series IC functional tests: This is the first development programmer to test the common logic integrated circuit and this test can be located the errors of logic gate circuit, as well as test any possible input combinations of integrated circuit.
Programmer self-testing function: This programmer can test itself on each pin of VPP, VCC, GND and I/O information, at the same time it can run an inside short-circuit test on VPP, VCC current.
AVR microcontroller one-to-one soft encryption: AVR microcontroller has an RC Calibration (calibrate bytes). Only one of dozens of chips may have the same bytes value and it cannot be modified. Microcontroller software can read this value and determine whether the code is used by other chips. Through custom encryption algorithm, it can stop those who decrypt chips with ulterior motives from directly using. The encryption algorithm is so complex that it is not easy to decrypt. But, about "encryption", there is a problem for developers - each chip is different - it is impossible to manually calculate one by one and respectively compile source code if the algorithm is complex. This programmer can automatically read into RC bytes before programming. The developer can get the bytes value of the chip in the DLL dynamic function and then automatically calculate the encrypted data according to the request and put it in the memory, efficiently completing mass production. (A detailed encrypted instance of the ATMEGA8 in the installation package is available for reference)
Unified and convenient user interface: The user interface is well-designed and is in complete accord with the operating habit of the Windows series of software. Built-in binary editer is comparable to pure professional editing software. You can directly read, write and modify the files such as BIN format, HEX format, JED format and so on. In addition, it has the complete and practical project mode that makes the mass production more convenient and safer.
Additional Images & Videos
Low Stock : Left
Due to the current Coronavirus/COVID-19 outbreak deliveries are being affected, shipping companies are meeting demand. Please allow an extra time for deliveries during this period. Our delivery options are chosen to get your purchase to you as quickly as possible, during this time we may choose other options to those stated (such as an alternate carrier) to try and ensure smooth deliveries.
All available stocked item orders are shipped the next working day, our UK mainland deliveries are free, where a tracked service has been used we shall provide you with the tracking number. This will allow you to track your parcel and alter delivery options, such as 'Leave in a safe place' or 'Hand to concierge' where possible.
Orders placed after 1pm will be posted the next working morning. This is to help us comply with the essential travel/lockdown requests by the government.
Free UK Mainland 2 to 3 day deliveries are shipped through Hermes 2 to 3 day service, smaller low cost items Royal Mail 1st class. Please check the product pages for more details on that product's shipping methods.
Pre-Orders will be shipped as soon as stock arrives at our UK warehouse, we will send an update when your order has been dispatched. Please note, dates given are approximate and may change due to unforseen circumstances. Should your order be unexpectedly delayed will will inform you to keep you updated.
TO ORDER ITEMS:
Our 'To Order' lines will be shipped direct and from our China warehouses, these typically take up to 20 days to arrive, however due to the current crisis please allow up to 40 days.
Any 'To Order' item is shipped with a tracking number that we will send you once live to allow you to monitor the progress of your item.
We welcome orders from International customers, currently we do not have postal options set on the site so please contact us and we can arrange delivery on most items.
Currently we cannot ship PPE, Masks or similar items out of the country, we apologise for this however if you require PPE items please use our contact form, we may be able to help.
LOCAL CROYDON AND SURROUNDING AREA CUSTOMERS:
If you are local to Central Croydon in the areas shown below we may deliver by hand within 2 days, this saves you waiting for the Royal Mail while they are busy delivering more than they could ever expect during this time.
These areas include: East, West, South, Central Croydon, Coulsdon, Thornton Heath, Norbury, South Norwood, Woodside, Crystal Palace, Upper Norwood, Waddon, Wallington, Shirley, New Addington, Sanderstead, Selhurst and Kenley. We will also cover West Wickham, Penge and Anerley as they are close enough to Croydon.